journal article·2024-08Open access

Synthesis and characterization of absorption-enhanced alumina solid particle materials for direct irradiation solar-thermal conversion

Jiawei Du, Le Zhao, Xinyi Zhang, Jiangbo Wu, Xiaoze Du, Hongwei Wu

Abstract

Based on solar-thermal application more than 1000 °C, a novel combination of sol-gel synthesis and stepwise calcination to prepare metal-ion doped alumina composite particles as heat transfer media were proposed, enhancing solar energy absorption and lowering preparation temperature. Investigations focused on the elemental distribution, phase composition, oxidation states, optical properties and thermal stability of the composites, which were doped with Cr, Co, Cu, Fe, and Mn metal ions in a 100:5 M ratio. The first-principles calculations elucidate the mechanism behind the impact of transition metal ions on alumina’s optical properties . Results show that introducing a small quantity of metal atoms results in new impurity energy levels and electron states around E F = 0 . Specifically, the band gap energy of Cu- and Mn–Al 2 O 3 decreases from 6.017 eV to 4.464 eV and 2.170 eV, respectively. Correspondingly, the absorptivity of these composite particles increases from around 20 %–76.6 %. And Tauc analysis indicates a decrease in the optical band gap of the particle materials from 5.37 eV to a range of 2.88–4.90 eV. Additionally, doping with Mn, Fe, and Cu accelerates the in-situ formation of α-Al 2 O 3 crystals, with a phase transition temperature below 1000 °C and a crystallinity exceeding 93 %. Thermal stability tests show that the particles are highly stable, exhibiting a mere 0.49 % mass change between 30 °C and 1200 °C. The stepwise inert annealing strategy and metal-iron doping positively influence the optical performance of alumina , synthesizing long-term high-temperature stable alumina ceramic particles with absorptance enhancement and a low α-Al 2 O 3 phase transition temperature. These attributes make a favorable choice for solar-thermal applications in direct irradiation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A review of hybrid renewable energy systems: solar and wind-powered solutions: challenges, opportunities, and policy implications
2. Massive grid-scale energy storage for next-generation concentrated solar power: a review of the potential emerging concepts10.1016/j.rser.2023.113633 ↗
3. Progress in technology advancements for next generation concentrated solar power using solid particle receivers
4. A review of directly irradiated solid particle receivers: technologies and influencing parameters10.1016/j.rser.2022.112682 ↗
5. Characterization of desert sand as a sensible thermal energy storage medium10.1063/1.4949109 ↗
6. Study on solar absorptance and thermal stability of solid particles materials used as TES at high temperature on different aging stages for CSP applications10.1016/j.solmat.2019.110088 ↗
7. A comprehensive review on solid particle receivers of concentrated solar power10.1016/j.rser.2019.109463 ↗
8. Physical properties of solid particle thermal energy storage media for concentrating solar power applications10.1016/j.egypro.2014.03.109 ↗
9. Properties of granular materials as heat transfer and storage medium in CSP application10.1016/j.solmat.2015.06.037 ↗
10. Capabilities of α-Al2O3, γ-Al2O3, and bentonite dry powders used in flat plate solar collector for thermal energy storage10.1016/j.renene.2021.04.026 ↗
11. Modifications in micro-structural, optical, and electrical properties of polycrystalline α-Al2O3 by 100 MeV Ag9+ ion beam irradiation10.1016/j.radphyschem.2023.110952 ↗
12. High purity alumina synthesised from iron rich clay through a novel and selective hybrid ammonium alum process10.1016/j.hydromet.2021.105728 ↗
13. Preparation of α-Al2O3 by low-temperature calcining γ-Al2O3 with α-phase seed in-situ obtained by ball milling
14. Seeding technique for lowering temperature during synthesis of α-alumina10.1016/j.jascer.2014.12.004 ↗
15. Evaluation and application of solid thermal energy carriers in a high temperature solar central receiver system; proceedings of the IECEC’82
16. Properties of solid particles as heat transfer fluid in a gravity driven moving bed solar receiver10.1016/j.solmat.2019.110007 ↗
17. The development of direct absorption and storage media for falling particle solar central receivers10.1115/1.4030069 ↗
18. Assessment and improvement of optical properties of particles for solid particle receiver10.1016/j.solener.2020.02.076 ↗
19. New coloured coatings to enhance silica sand absorbance for direct particle solar receiver applications10.1016/j.renene.2020.01.053 ↗
20. Physical property design of multi-component particle systems as heat transfer medium for directly irradiated solar receiver10.1016/j.applthermaleng.2022.119470 ↗
21. Synthesis of fast sinterable oxygen deficient nano α−alumina & its optical properties10.1016/j.jallcom.2017.11.297 ↗
22. Modification of high temperature radiation absorption properties of solid particles with surface coating10.1016/j.solmat.2023.112567 ↗
23. Preparation and characterization of thin optically transparent alumina and Ce-doped alumina10.1023/A:1013703602051 ↗
24. The development of direct absorption and storage media for falling particle solar central receivers10.1115/1.4030069 ↗
25. Characterization of solid particle candidates for application in thermal energy storage and concentrating solar power systems
26. Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: a viable waste management approach10.1016/j.arabjc.2022.104518 ↗
27. Investigation of the physical properties and antibacterial activity of various ferrite, chromite, and aluminate nanocomposites10.1016/j.jallcom.2023.171953 ↗
28. Band-gap determination from diffuse reflectance measurements of semiconductor films, and application to photoelectrochemical water-splitting10.1016/j.solmat.2007.05.005 ↗
29. Effects of pH and calcination temperature on structural and optical properties of alumina nanoparticles10.1016/j.spmi.2015.01.044 ↗
30. Effect of calcination temperature on visible near-infrared reflectance of aluminum-doped chromium10.1016/j.mssp.2019.104672 ↗
31. Zinc substitution effect on the structural, spectroscopic and electrical properties of nanocrystalline MnFe2O4 spinel ferrite10.1016/j.ceramint.2020.08.284 ↗
32. Synthesis and magneto-optical studies of novel Ni0. 5Zn0. 5Fe2O4/Zn0. 95Co0. 05O nanocomposite as a candidate for photocatalytic applications10.1016/j.ceramint.2021.09.209 ↗
33. Optical and Mössbauer spectroscopy of lithium tetraborate glass doped with iron oxide10.1016/j.optmat.2020.110744 ↗
34. Insight into the catalytic performance and NH3 adsorption under high concentration of CO2 and/or H2O conditions on selective catalytic reduction of NO by NH3 over V2O5-WO3/TiO2 catalyst10.1016/j.fuel.2020.119478 ↗
35. Hydrophobic coating using sustainable sol-gel process doped with carboxylic acids to protect heritage copper artefacts10.1016/j.porgcoat.2023.108035 ↗
36. First principle calculation of thermal conversion properties of W-Al2O3 based solar selective absorbing coating10.1016/j.commatsci.2022.111501 ↗
37. Effect of active Ti element on the bonding characteristic of the Ag (111)/α-Al2O3 (0001) interface by using first principle calculation10.1016/j.ceramint.2019.10.301 ↗