journal article·2024-01

Defining specifications for accurate Metal/TCO specific contact resistivity measurements by TLM in silicon heterojunction devices

Sénami Zogbo, Wilfried Favre, Olivier Bonino, Marie-Estelle Gueunier-Farret

Publisher page

Abstract

Measuring specific contact resistivity (ρc) in test vehicles representative of the final solar cell is critical for interface engineering in high efficiency devices such as silicon heterojunction (SHJ) solar cell. The Transfer Length Method (TLM) is commonly used for layer sheet resistance (Rsheet) and ρc evaluation and is valid for samples with charge transport confined in one conductive layer only. For metal/Transparent Conductive Oxide (TCO) interface ρc evaluation from SHJ cells precursors, there is a need to prevent any contribution from the conductive c-Si. In this work, we investigated by simulation and experimental approach the parameters restricting the current confinement inside the TCO. The first one is the mid-gap trap density (Dit) at the a-Si:H/c- Si interface which has no strong impact on current confinement on simulated TLM test structures. The second one is the variation of the activation energy (Ea = Ec - EF) of the a-Si:H contact layers. Both simulated and experimentalresults have demonstrated that three current distribution regimes are possible in the TLM test structure depending on the Ea value with only one regime, for Ea between 0.6 and 1.4 eV, enabling to isolate the metal/ TCO interface. This condition is mandatory to maintain a sufficiently high potential barrier for electrons at theinterfaces a-Si:H(p)/a-Si:H(i)/c-Si(n) and thus lateral current in the TCO layer to apply TLM on SHJ devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
2. A review of some charge transport properties of silicon10.1016/0038-1101(77)90054-5 ↗
3. The new copper composite of pastes for Si solar cells front electrode application10.1016/j.egypro.2016.07.108 ↗
4. Schube · 2021 · 100
5. Reduction in indium usage for silicon heterojunction solar cells in a short‐term Industrial.pdf10.1002/solr.202200598 ↗
6. gt; 85% indium reduction for high-efficiency silicon heterojunction solar cells with aluminum-doped zinc oxide contacts10.1016/j.solmat.2022.112120 ↗
7. Feasibility test of drastic indium cut down in SHJ solar cells and modules using ultra-thin ITO layers10.1016/j.solmat.2023.112512 ↗
8. Lateral transport in silicon solar cells10.1063/1.5139416 ↗
9. Low-resistivity screen-printed contacts on indium tin oxide layers for silicon solar cells with passivating contacts10.1109/JPHOTOV.2018.2859768 ↗
10. Clement · 2023
11. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers », Supplementary information
12. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
13. Influence of the transparent conductive oxide layer deposition step on electrical properties of silicon heterojunction solar cells10.1063/1.4804985 ↗
14. Drive · 2018
15. Understanding of the influence of localized surface defectivity properties on the performances of silicon heterojunction cells10.1002/pip.3330 ↗
16. Understanding of the influence of the surface defectivity on silicon heterojunction cell performance
17. Basset · 2021 · 205
18. Recent progress in understanding the properties of the amorphous silicon/crystalline silicon interface10.1002/pssa.201800877 ↗
19. Electronic processes in non-crystalline materials
20. Versatile pilot line to support the heterojunction solar cell industrial development: Busbar and Busbar-less configurations
21. Contact resistance on diffused resistors
22. Influence of silicon layers on the growth of ITO and AZO in silicon heterojunction solar cells10.1109/JPHOTOV.2019.2957665 ↗