Enhancement of short-circuit current density in silicon heterojunction solar cells by hydrogenated multiple-doped In2O3 thin films
Source abstract
Abstract
Boosting short-circuit current density (J SC ) is crucial to enhance the power conversion efficiency (PCE) of silicon heterojunction (SHJ) solar cells. Herein, hydrogenated W, Mo, Ti, Zr, and Ga-doped indium oxide (IMO:H) films are explored and the structural and optical-electrical characteristics were optimized with the gas flow rate ratio of hydrogen and total gas flow rate. IMO:H films exhibit preferential orientation growth in <100> direction and a distinct shift to higher 2θ with the addition hydrogen is observed due to the size mismatch between doped ions and In ions. Furthermore, the carrier concentration of IMO:H films is decreased due to the substitution of oxygen vacancies by hydrogen, leading to the decrement of free carrier absorption and a 1.25% abs increase of effective total transmittance is obtained in the region from 600 to 1200 nm. Additionally, the mobility of IMO:H films enhances to 67.31 cm 2V −1s −1 with optimized resistivity of 2.59 × 10 −4 Ω cm ascribing to the reduction of ionized impurity scattering centers provided by oxygen vacancies. When using IMO:H films as rear electrode in industrial solar cells, a 0.35 mA/cm 2 absolute increase of average J SC and a 0.33% abs increase in average fill factor is acquired, respectively. Finally, an average PCE gain of 0.18% abs is come through and the champion cell shows PCE of 23.81 %. This work clearly interprets the functions of hydrogen in IMO:H films and offers a valid guidance to optimize of high-efficiency SHJ solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
2. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
3. Nanocrystalline silicon carrier collectors for silicon heterojunction solar cells and impact on low-temperature device characteristics10.1109/JPHOTOV.2016.2604574 ↗
4. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
5. Sputtered transparent electrodes (IO:H and IZO) with low parasitic near-infrared absorption for perovskite–Cu(in,Ga)Se2 tandem solar cells10.1021/acsaem.9b01224 ↗
6. Application of indium tin oxide/aluminum-doped zinc oxide transparent conductive oxide stack films in silicon heterojunction solar cells10.1021/acsaem.1c02209 ↗
7. Enhancement in optoelectronic nature of facile spray fabricated Ce co-doped CdO:Zn films for TCO applications10.1016/j.ijleo.2020.165408 ↗
8. Resonant Ta doping for enhanced mobility in transparent conducting SnO(2)10.1021/acs.chemmater.9b04845 ↗
9. Correlations between the electronic properties of doped indium oxide ceramics and the nature of the doping element10.1016/0921-5107(92)90339-B ↗
10. Role of dopants as a carrier suppressor and strong oxygen binder in amorphous indium-oxide-based field effect transistor10.1557/jmr.2014.187 ↗
11. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
12. Effects of titanium doping concentration on the structural and electrical properties of sputtered indium oxide films10.1166/jnn.2015.9337 ↗
13. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
14. Improved near-infrared transparency in sputtered In2O3-based transparent conductive oxide thin films by Zr-doping10.1063/1.2711768 ↗
15. Resonant doping for high mobility transparent conductors: the case of Mo-doped In2O310.1039/C9MH01014A ↗
16. High-mobility thin-film transistors with polycrystalline in–Ga–O channel fabricated by DC magnetron sputtering
17. Development of low temperature stoichiometric solution combustion derived transparent conductive ternary zinc tin co-doped indium oxide electrodes10.1039/C7RA09189C ↗
18. Effective mass of high-mobility In2O3-based transparent conductive oxides fabricated by solid-phase crystallization
19. High mobility Ti, Zr and Ga-codoping In2O3 transparent conductive oxide films prepared at low temperatures10.1007/s10854-020-05068-x ↗
20. High-performance Ti and W co-doped indium oxide films for silicon heterojunction solar cells prepared by reactive plasma deposition10.1016/j.jpowsour.2021.230101 ↗
21. Hydrogen doping in indium oxide: anab initiostudy10.1103/PhysRevB.80.193202 ↗
22. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
23. Power conversion efficiency of 25.26% for silicon heterojunction solar cell with transition metal element doped indium oxide transparent conductive film as front electrode10.1002/pip.3565 ↗
24. Improved electrical properties of pulsed DC magnetron sputtered hydrogen doped indium oxide after annealing in air10.1016/j.mssp.2018.09.012 ↗
25. Effect of thickness and substrate temperature on the properties of transparent Ti-doped In2O3 films grown by direct current magnetron sputtering10.1016/j.tsf.2013.02.073 ↗
26. Hydrogen-doped In2O3 for silicon heterojunction solar cells: identification of a critical threshold for water content and rf sputtering power10.1016/j.solmat.2020.110844 ↗
27. Effects of total gas flow rate and sputtering power on the critical condition for target mode transition in Al–O2 reactive sputtering10.1016/j.vacuum.2009.06.024 ↗
28. Study on reactive sputtering of yttrium oxide: process and thin film properties10.1016/j.surfcoat.2015.06.052 ↗
29. High-performance multiple-doped In2O3 transparent conductive oxide films in near-infrared light region10.1063/5.0103270 ↗
30. The deposition of low temperature sputtered In2O3 films using pulsed d.c magnetron sputtering from a powder target10.1016/j.tsf.2013.10.141 ↗
31. High rate deposition of alumina films by reactive gas flow sputtering10.1016/0257-8972(93)90078-3 ↗
32. Environmental stability of high-mobility indium-oxide based transparent electrodes10.1063/1.4935125 ↗
33. Enhanced optical and electrical properties of ITO on a PET substrate by hydrogen plasma and HCl treatment10.1088/0022-3727/46/12/125103 ↗
34. Low resistance ohmic contacts to amorphous IGZO thin films by hydrogen plasma treatment10.1016/j.surfcoat.2012.06.017 ↗
35. Limitations of In2O3 as a transparent conducting oxide10.1063/1.5109569 ↗
36. Dielectric modeling of transmittance spectra of thin ZnO:Al films10.1016/j.tsf.2005.08.282 ↗
37. Effect of oxygen and hydrogen flow ratio on indium tin oxide films in rear-junction silicon heterojunction solar cells10.1016/j.solener.2021.12.007 ↗
38. Influence of TCO and a-Si:H doping on SHJ contact resistivity10.1109/JPHOTOV.2021.3051206 ↗
39. Aluminium-doped zinc oxide rear reflectors for high-efficiency silicon heterojunction solar cells10.1109/JPHOTOV.2019.2926860 ↗
40. Damage to passivation contact in silicon heterojunction solar cells by ITO sputtering under various plasma excitation modes10.1016/j.solmat.2018.12.001 ↗