Efficient-thermal conductivity, storage and application of bionic tree-ring composite phase change materials based on freeze casting
Source abstract
Abstract
Thermal energy storage, management, and utilization with phase change materials have received increasing attention in industrial fields such as photo-thermal-electric conversion and integrated circuit cooling. However, the inherent low thermal conductivity and melting leakage are long-term bottlenecks that prevent their widespread commercial application. Herein, a novel composite phase change material (CPCM) with high-thermal conductivity and stability based on bionic porous SiC skeleton is proposed, which is oriented by optimized freeze casting to design vertical tree-ring porous structure for fast photo-thermal conversion and storage. The results demonstrate the novel bionic SiC skeleton can regulate the porosity (50%–70%) by changing the slurry solid content, which also exhibits good anisotropic thermal conductivity. SiC/paraffin CPCM`s mass and latent enthalpy of attenuated merely by 0.87% and 1.5% after 200 repeated heat storage/exhaustion cycles, confirming its excellent longevity and stability. The high-temperature SiC/NaCl-MgCl 2 -KCl CPCM has a thermal conductivity of 12.54 W‧m −1‧K −1, an effective thermal-storage density per production cost of 74.5 kJ‧CNY -1, and a high photo-thermal storage efficiency of 91.8%. Finally, a variable-power chip dissipation experimental system was built to verify the thermal performance of the CPCM module in the paper. It could dissipate heat rapidly and maintain a lower temperature. This work provides a promising strategy for photo-thermal utilization and thermal management of electronic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar-Powered Water Purification Methods · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Thermal energy storage materials and systems for solar energy applications10.1016/j.rser.2016.10.021 ↗
2. Battery thermal management systems (BTMs) based on phase change material (PCM): a comprehensive review10.1016/j.cej.2021.132741 ↗
3. An analysis of a packed bed thermal energy storage system using sensible heat and phase change materials10.1016/j.ijheatmasstransfer.2019.118651 ↗
4. Carbon-based composite phase change materials for thermal energy storage, transfer, and conversion10.1002/advs.202001274 ↗
5. A review on numerical simulation, optimization design and applications of packed-bed latent thermal energy storage system with spherical capsules10.1016/j.est.2022.104555 ↗
6. Preparation and performance improvement of chlorides/MgO ceramics shape-stabilized phase change materials with expanded graphite for thermal energy storage system10.1016/j.apenergy.2022.119116 ↗
7. Thermally conductive phase change composites featuring anisotropic graphene aerogels for real-time and fast-charging solar-thermal energy conversion10.1002/adfm.201805365 ↗
8. Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage10.1016/j.apenergy.2020.114674 ↗
9. Encapsulation of inorganic phase change thermal storage materials and its effect on thermophysical properties: a review10.1016/j.solmat.2022.111747 ↗
10. Experimental investigation on copper foam/hydrated salt composite phase change material for thermal energy storage10.1016/j.ijheatmasstransfer.2017.07.056 ↗
11. Encapsulated phase change material for high temperature thermal energy storage – heat transfer analysis10.1016/j.ijheatmasstransfer.2014.07.087 ↗
12. Enhancement of latent heat energy storage using embedded heat pipes10.1016/j.ijheatmasstransfer.2011.03.038 ↗
13. Biomass carbon aerogels based shape-stable phase change composites with high light-to-thermal efficiency for energy storage10.1016/j.renene.2020.02.008 ↗
14. A review of phase change material and performance enhancement method for latent heat storage system10.1016/j.rser.2018.05.028 ↗
15. Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubes10.1016/j.energy.2013.04.010 ↗
16. Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles10.1016/j.applthermaleng.2012.05.033 ↗
17. Controllable preparation method and thermal properties of composite phase change materials based on starch pore formation10.1016/j.solmat.2023.112255 ↗
18. Shape-stable composite phase change materials encapsulated by bio-based balsa wood for thermal energy storage10.1016/j.solmat.2021.111187 ↗
19. Different dimensional nanoadditives for thermal conductivity enhancement of phase change materials: fundamentals and applications10.1016/j.nanoen.2021.105948 ↗
20. Metal foam-phase change material composites for thermal energy storage: a review of performance parameters10.1016/j.rser.2021.111919 ↗
21. The graphite foam/erythritol composites with ultrahigh thermal conductivity for medium temperature applications10.1016/j.solmat.2021.111135 ↗
22. Polyethylene glycol/silica (PEG@SiO2) composite inspired by the synthesis of mesoporous materials as shape-stabilized phase change material for energy storage10.1016/j.renene.2019.05.118 ↗
23. Phase change material heat sink for transient cooling of high-power devices10.1016/j.ijheatmasstransfer.2021.121033 ↗
24. Enhanced thermal conductivity and photo-to-thermal performance of diatomite-based composite phase change materials for thermal energy storage10.1016/j.est.2020.102171 ↗
25. Skeleton materials for shape-stabilization of high temperature salts based phase change materials: a critical review10.1016/j.rser.2019.109539 ↗
26. High thermal conductivity and high energy density compatible latent heat thermal energy storage enabled by porous AlN ceramics composites10.1016/j.ijheatmasstransfer.2021.121405 ↗
27. High-performance thermal energy storage and thermal management via starch-derived porous ceramics-based phase change devices10.1016/j.ijheatmasstransfer.2022.123337 ↗
28. Optimization design and performance investigation on the cascaded packed-bed thermal energy storage system with spherical capsules10.1016/j.applthermaleng.2023.120241 ↗
29. Heat transfer characteristics of ceramic foam/molten salt composite phase change material (CPCM) for medium-temperature thermal energy storage10.1016/j.ijheatmasstransfer.2022.123262 ↗
30. Nacre-mimetic elastomer composites with synergistic alignments of boron nitride/graphene oxide towards high through-plane thermal conductivity10.1016/j.compositesa.2022.106891 ↗
31. Loofah-derived eco-friendly SiC ceramics for high-performance sunlight capture, thermal transport, and energy storage10.1016/j.ensm.2021.12.030 ↗
32. Eco-friendly and large porosity wood-derived SiC ceramics for rapid solar thermal energy storage10.1016/j.solmat.2022.112174 ↗
33. Freeze casting: from low-dimensional building blocks to aligned porous structures-A review of novel materials, methods, and applications10.1002/adma.201907176 ↗
34. A simple method to control the pore structure and shape of freeze-cast porous SiC ceramics10.1016/j.ceramint.2020.07.101 ↗
35. Fabrication of high permeability SiC ceramic membrane with gradient pore structure by one-step freeze-casting process10.1016/j.ceramint.2021.03.078 ↗
36. Architectural control of freeze-cast ceramics through additives and templating10.1111/j.1551-2916.2009.03087.x ↗
37. Theoretical and experimental study on the anisotropic thermal conductivity of composite phase change materials prepared by hot-pressing method10.1016/j.ijheatmasstransfer.2022.123380 ↗
38. Bamboo derived SiC ceramics-phase change composites for efficient, rapid, and compact solar thermal energy storage10.1016/j.solmat.2022.111726 ↗
39. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
40. Phase change composite based on porous nickel and erythritol10.1016/j.applthermaleng.2012.02.033 ↗
41. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid- to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
42. Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage10.1016/j.nanoen.2021.106338 ↗
43. Experimentally validated numerical model of multi-spectral bands radiative transport in solar receiver/reactor with photo-active porous absorber reacting media10.1016/j.enconman.2023.116740 ↗
44. Preparation and characteristic of wood-based inorganic composite phase change material with effective anisotropic thermal conductivity for thermal energy storage10.1016/j.solmat.2022.112172 ↗
45. Photo-triggered hierarchical porous carbon-based composite phase-change materials with superior thermal energy conversion capacity10.1021/acssuschemeng.9b07659 ↗
46. 3D porous copper foam-based shape-stabilized composite phase change materials for high photothermal conversion, thermal conductivity and storage10.1016/j.renene.2021.05.019 ↗