journal article·2023-12

Nitrate salt-halloysite nanotube (HNT) composite phase change materials for thermal energy storage: The feasibility of material fabrication by using HNT as skeleton substance and its thermal properties

Chuan Li, Li Han, Guoyun Leng, Haitao Lu, Rongyu Xu, Yanping Du, Qi Li, Yuting Wu

Publisher page

Abstract

This work concerns the fabrication of a salt based form-stable phase change composite by employing halloysite nanotube (HNT) as ceramic supporting material (CSM). The HNT has been broadly reported for preparation of low-temperature organic composites but very little has been done in medium and high temperature thermal energy storage fields. Herein we demonstrate for the first time with the use of HNT as skeleton substance for the fabrication of salt composite by cold compression and hot sintering technology. The feasibility of material fabrication is confirmed by evaluating a case containing a salt of sodium nitrate as phase change material and HNT as CSM. The effect of preheating treatment of HNT on the microstructure and phase change behaviours as well as cycling performance of the composite is investigated. The results show that HNT can be wetted by the liquid nitrate salt at elevated temperatures, verifying the viability of the present strategy by using HNT as SSM for the synthesis of salt composite. A stable chemical structure is achieved in the salt-HNT composite, which confirms a preeminent chemical stability and compatibility between the HNT and nitrate salt. The hollow tubular structure of HNT could not only be able to provide extra surface for accommodating liquid salt to form a dense composite, but also strengthen the thermal stability of the nitrate salt. The preheating treatment of HNT at 300 °C and 500 °C respectively causes the occurrence of dehydration and dehydroxylation process, which in turn leads to the morphology and microstructure change of HNT, and hence affects the cycling performance of the composite. In comparison with the composite made from HNT preheated at 500 °C where a serious pulverization and deformation has been observed after 100 thermal cycles, the composite containing HNT preheated at 300 °C presents more stable structure and excellent cycling performance, revealing that the HNT is only suitable for the accommodation of inorganic salt that having application temperature limit less than 500 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A new approach exploiting thermally activated delayed fluorescence molecules to optimize solar thermal energy storage10.1038/s41467-022-28489-0 ↗
2. Rate capability and Ragone plots for phase change thermal energy storage10.1038/s41560-021-00778-w ↗
3. A comprehensive review on the recent advances in materials for thermal energy storage applications10.1016/j.ijft.2023.100326 ↗
4. Review on heat pump (HP) coupled with phase change material (PCM) for thermal energy storage10.1016/j.cej.2022.140701 ↗
5. UV-cured polymer aided phase change thermal energy storage: preparation, mechanism and prospects
6. A novel high temperature eutectic salt and its composite with enhanced high conductivity10.1016/j.est.2022.106409 ↗
7. Fabrication and thermal properties investigation of aluminium based composite phase change material for medium and high temperature thermal energy storage
8. Nanocomposite phase change materials for high-performance thermal energy storage: a critical review10.1016/j.ensm.2022.12.037 ↗
9. Inorganic salt based shape-stabilized composite phase change materials for medium and high temperature thermal energy storage: ingredients selection, fabrication, microstructural characteristics and development, and applications10.1016/j.est.2022.105252 ↗
10. A review of eutectic salts as phase change energy storage materials in the context of concentrated solar power10.1016/j.ijheatmasstransfer.2023.123904 ↗
11. Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
12. Shape stabilized phase change materials based on different support structures for thermal energy storage applications-A review10.1016/j.energy.2022.125463 ↗
13. Properties and applications of shape-stabilized phase change energy storage materials based on porous material support-A review10.1016/j.mtsust.2023.100336 ↗
14. Heat transfer characteristics of ceramic foam/molten salt composite phase change material (CPCM) for medium-temperature thermal energy storage10.1016/j.ijheatmasstransfer.2022.123262 ↗
15. Heat transfer characteristics and compatibility of molten salt/ceramic porous composite phase change material10.1016/j.nanoen.2022.107476 ↗
16. Preparation and characterization of NaNO3 shape-stabilized phase change materials (SS-PCMs) based on anorthite ceramic and cordierite ceramic for solar energy storage10.1016/j.solmat.2022.112114 ↗
17. Effect of carbon on the performance of red mud-molten salt composites for thermal management and waste heat recovery applications10.1016/j.est.2021.103363 ↗
18. Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications10.1016/j.jhazmat.2021.125407 ↗
19. Ternary chloride salt-porous ceramic composite as a high-temperature phase change material10.1016/j.energy.2021.121838 ↗
20. A novel process for preparing molten salt/expanded graphite composite phase change blocks with good uniformity and small volume expansion10.1016/j.solmat.2017.05.046 ↗
21. Development and investigation of form-stable quaternary nitrate salt based composite phase change material with extremely low melting temperature and large temperature range for low-mid thermal energy storage10.1016/j.egyr.2021.12.054 ↗
22. Preparation and thermal properties of graphite foam/eutectic salt composite as a phase change energy storage material10.1016/j.carbon.2015.06.051 ↗
23. Comparative investigation of charging performance in shell and tube device containing molten salt based phase change materials for thermal energy storage10.1016/j.csite.2023.102804 ↗
24. Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material10.1016/j.apenergy.2019.05.090 ↗
25. Mussel-inspired grafting pH-responsive brushes onto halloysite nanotubes for controlled release of doxorubicin10.1016/j.eurpolymj.2022.111583 ↗
26. Gaikwad. Halloysite nanotubes for food packaging application: a review
27. High morphological stability and structural transition of halloysite (Hunan, China) in heat treatment10.1016/j.clay.2014.08.010 ↗
28. Phase change material microcapsules with DOPO/Cu modified halloysite nanotubes for thermal controlling of buildings: thermophysical properties, flame retardant performance and thermal comfort levels10.1016/j.ijheatmasstransfer.2023.124045 ↗
29. A novel form-stable phase change material based on halloysite nanotube for thermal energy storage10.1016/j.est.2021.103703 ↗
30. Effect of halloysite nanotubes on shape stabilities of polyethylene glycol-based composite phase change materials10.1016/j.ijheatmasstransfer.2018.11.160 ↗
31. Enhanced thermal properties and lab-scale thermal performance of polyethylene glycol/modified halloysite nanotube form-stable phase change material cement panel10.1016/j.conbuildmat.2022.126550 ↗
32. A novel low-temperature fabrication approach of composite phase material for high temperature thermal energy storage10.1016/j.apenergy.2018.12.072 ↗
33. Composite materials for thermal energy storage: enhancing performance through microstructures