Firing behavior of lead-containing and lead-free metallization silver paste for monocrystalline silicon solar cells
Source abstract
Abstract
In this work, PbO-TeO 2 -Bi 2 O 3 -SiO 2 lead-containing glass and TeO 2 -Bi 2 O 3 -ZnO-Li 2 O lead-free glass were synthesized in order to investigate the difference between them and find out the reason why lead-free paste can't be used on monocrystalline wafer commercially. Their flowability and reactivity with SiN x were characterized. Lead-free glass presents lower flow temperature, better wettability and stronger etching ability to SiN x than lead-containing glass. Button test was carried out and large white particles was identified on the interface for lead-free glass. These results indicates the excessive flowability and etching to SiN x for lead-free glass. The morphology of grid line and interface between silver electrode and silicon wafer were investigated on dependence of temperature. The lead-containing and lead-free glasses went through similar evolution of silver sintering and interface microstructure with lead-free glass better facilitating silver sintering through liquid phase sintering due to its lower flow temperature. The thicker glass layer and more Ag crystallites with large size can be observed from cross-sectional micrographs for lead-free glass. Therefore, lead-free paste exhibits lower V oc and FF than lead-containing glass owing to its ecxessive corrosion of SiN x , thicker glass layer and large Ag crystallites .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. 23.83% efficient mono‐PERC incorporating advanced hydrogenation10.1002/pip.3243 ↗
2. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
3. Effect of basicity of glass frits on electrical properties of Si solar cells10.1016/j.solmat.2018.05.015 ↗
4. Effect of composition of front-electrode-paste glass on electrical performance of multicrystalline silicon solar cells10.1007/s10854-017-6394-8 ↗
5. Effect of the Pb–Te–B–O system glass frits in the front contact paste on the conversion efficiency of crystalline silicon solar cells10.1007/s10854-014-2089-6 ↗
6. Microstructural comparison of silicon solar cells front-side Ag contact and the evolution of current conduction mechanisms
7. Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells10.1007/s12540-009-0307-1 ↗
8. Current transport mechanism in printed Ag thick film contacts to an n-type emitter of a crystalline silicon solar cell
9. Role of the ambient oxygen on the silver thick-film contact formation for crystalline silicon solar cells10.1016/j.cap.2009.11.054 ↗
10. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
11. Understanding the influence of tellurium oxide in front Ag paste for contacting silicon solar cells with homogeneous high sheet resistance emitter10.7567/JJAP.56.08MB07 ↗
12. High-efficiency crystalline-Si solar cells with screen-printed front-side metallization: a Percolation Model to Explain the Current Path10.1007/s11664-016-4818-5 ↗
13. On the swelling of silver powder during sintering10.1080/00325899.2016.1250037 ↗
14. Effect of Te-based glass on contact formation and electrical properties in Si solar cells10.1016/j.jallcom.2020.154500 ↗
15. Effectiveness of oxygen during sintering of silver thin films derived by nanoparticle ink10.3390/nano12111908 ↗
16. Reaction and interfacial structures between Ag paste with tellurite glass frits and Si wafer for solar cells10.1007/s12540-015-4567-7 ↗
17. Characterization of TeO2 based glass frits and morphology to their silver films10.1007/s10854-017-7789-2 ↗
18. Effect of TeO2-based lead-free glass on contact formation of front side silver metallization for monocrystalline silicon solar cells10.1016/j.solmat.2022.111585 ↗
19. Preparation of ultrafine silver powders with controllable size and morphology10.1016/S1003-6326(18)64685-0 ↗
20. Sintering and consolidation of silver nanoparticles printed on polyimide substrate films10.1007/BF03218910 ↗
21. Effect of Ag powder and glass frit in Ag paste on front contract of silicon solar cells10.1016/j.proeng.2013.10.007 ↗
22. Investigation of Ag-bulk/glassy-phase/Si heterostructures of printed Ag contacts on crystalline Si solar cells10.1016/j.solmat.2008.02.032 ↗
23. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗