Assessment of GaPSb/Si tandem material association properties for photoelectrochemical cells
Source abstract
Abstract
Here, the structural, electronic and optical properties of the GaP1-xSbx/Si tandem materials association are determined in view of its use for solar water splitting applications. The GaPSb crystalline layer is grown on Si by Molecular Beam Epitaxy with different Sb contents. The bandgap value and bandgap type of GaPSb alloy are determined on the whole Sb range, by combining experimental absorption measurements with tight binding (TB) theoretical calculations. The indirect (X-band) to direct (Γ-band) cross-over is found to occur at 30% Sb content. Especially, at a Sb content of 32%, the GaP1-xSbx alloy reaches the desired 1.7eV direct bandgap, enabling efficient sunlight absorption, that can be ideally combined with the Si 1.1 eV bandgap. Moreover, the band alignment of GaP1-xSbx alloys and Si with respect to water redox potential levels has been analyzed, which shows the GaPSb/Si association is an interesting combination both for the hydrogen evolution and oxygen evolution reactions. These results open new routes for the development of III-V/Si low-cost high-efficiency photoelectrochemical cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Nanowire Synthesis and Applications · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Artificial photosynthesis: solar splitting of water to hydrogen and oxygen10.1021/ar00051a007 ↗
2. Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0603395103 ↗
3. Electrochemical synthesis of photoelectrodes and catalysts for use in solar water splitting10.1021/acs.chemrev.5b00498 ↗
4. 2012
5. Monolithic cells for solar fuels10.1039/C3CS60424A ↗
6. Strategies for stable water splitting via protected photoelectrodes10.1039/C6CS00918B ↗
7. An analysis of the optimal band gaps of light absorbers in integrated tandem photoelectrochemical water-splitting systems10.1039/c3ee40453f ↗
8. Direct solar-to-hydrogen conversion via inverted metamorphic multi-junction semiconductor architectures10.1038/nenergy.2017.28 ↗
9. A monolithic photovoltaic-photoelectrochemical device for hydrogen production via water splitting10.1126/science.280.5362.425 ↗
10. Efficient direct solar-to-hydrogen conversion by in situ interface transformation of a tandem structure10.1038/ncomms9286 ↗
11. Monolithic photoelectrochemical device for direct water splitting with 19% efficiency10.1021/acsenergylett.8b00920 ↗
12. Techno-economic analysis of three different substrate removal and reuse strategies for III-V solar cells10.1002/pip.2776 ↗
13. III–V semiconductor materials for solar hydrogen production: status and prospects10.1021/acsenergylett.9b02582 ↗
14. Universal description of III-V/Si epitaxial growth processes
15. Electrically pumped continuous-wave III–V quantum dot lasers on silicon10.1038/nphoton.2016.21 ↗
16. Efficient solar water splitting, exemplified by RuO2-catalyzed AlGaAs/Si photoelectrolysis10.1021/jp002083b ↗
17. Quantum dot activated indium gallium nitride on silicon as photoanode for solar hydrogen generation10.1038/s42004-018-0105-0 ↗
18. A stress-free and textured GaP template on silicon for solar water splitting10.1002/adfm.201801585 ↗
19. Design of a lattice-matched III–V–N/Si photovoltaic tandem cell monolithically integrated on silicon substrate10.1007/s11082-014-9909-z ↗
20. Gallium Phosphide photoanode coated with TiO2 and CoOx for stable photoelectrochemical water oxidation10.1364/OE.27.00A364 ↗
21. Amorphous TiO2 coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation10.1126/science.1251428 ↗
22. Epitaxial III–V films and surfaces for photoelectrocatalysis10.1002/cphc.201200390 ↗
23. Unassisted water splitting using a GaSbxP (1-x) photoanode10.1002/aenm.201703247 ↗
24. Quantum cascade lasers grown on silicon10.1038/s41598-018-24723-2 ↗
25. Photoelectrochemical water oxidation of GaP1−xSbx with a direct band gap of 1.65 eV for full spectrum solar energy harvesting10.1039/C9SE00113A ↗
26. Defects limitation in epitaxial GaP on bistepped Si surface using UHVCVD–MBE growth cluster10.1016/j.jcrysgro.2013.05.022 ↗
27. Toward practical solar hydrogen production – an artificial photosynthetic leaf-to-farm challenge10.1039/C8CS00699G ↗
28. Structural and optical analyses of GaP/Si and (GaAsPN/GaPN)/GaP/Si nanolayers for integrated photonics on silicon
29. Optical dispersion relations for GaP, GaAs, GaSb, InP, InAs, InSb, AlxGa1−xAs, and In1−xGaxAsyP1−y10.1063/1.343580 ↗
30. GaPSb: a new ternary material for Schottky diode fabrication on InP10.1063/1.105450 ↗
31. Empirical spds* tight-binding calculation for cubic semiconductors: general method and material parameters10.1103/PhysRevB.57.6493 ↗
32. Temperature dependence of the energy gap in semiconductors10.1016/0031-8914(67)90062-6 ↗
33. Direct band gap gallium antimony phosphide (GaSb x P 1- x) alloys10.1038/srep20822 ↗
34. Structural, thermodynamic and electronic properties of GaPxSb1–x and InPxSb1–x alloys
35. Band-edge levels in semiconductors and insulators: hybrid density functional theory versus many-body perturbation theory
36. Temperature dependence of the energy gap in GaAs and GaP10.1063/1.1657024 ↗
37. Photoluminescence of high-quality GaSb grown from Ga- and Sb-rich solutions by liquid-phase epitaxy10.1063/1.352216 ↗
38. Universal alignment of hydrogen levels in semiconductors, insulators and solutions10.1038/nature01665 ↗
39. Synthesis and properties of antimonide nanowires
40. Efficient solar hydrogen production by photocatalytic water splitting: from fundamental study to pilot demonstration10.1016/j.ijhydene.2010.01.030 ↗
41. Roadmap on solar water splitting: current status and future prospects
42. Heterogeneous photocatalyst materials for water splitting10.1039/B800489G ↗