journal article·2025-09Open access

A 4E analyses of pyramidal solar still with novel techniques for efficient desalination

Nagendra Pandey, Y. Naresh

Abstract

In recent years, substantial efforts have been focused on innovating solar still designs to overcome the issue of low water yield. The presents study investigated the integration of a pulsating heat pipe (PHP), fogger, phase change material (PCM), and fins in pyramidal solar still. The experiments were on three different solar stills, namely: Case I is a conventional pyramidal solar still (CPSS), Case II incorporates PCM and fins (MPSS1), Case III features a solar still with an ultrasonic fogger, PCM, PHP, and fins (MPSS2). The performance of the three cases was compared and assessed by analysing the freshwater yield, energy, and exergy efficiency, and conducting economic and environmental evaluations. The results indicated that the freshwater produced by Case III increased considerably compared to Case I and Case II. Case III achieved 7.96 L/m 2 , representing improvements of 121.72 % and 38.19 % over Case I and Case II, respectively. Case III exhibited an average energy efficiency of 54.90 %, showing enhancements of 29.48 % and 47.58 % compared to Case II and Case I, respectively. Moreover, Case III exergy efficiency was 4.51 %, reflecting increases of 30.72 % compared to Case II and 58.24 % compared to Case I. Economic analysis indicated Cost per Liter (CPL) for Case III was $0.010, demonstrating reductions of 23 % and 33.33 % for Case III compared to Case II and Case I, respectively. The payback period for Case III was 125 days, showing decreases of 10.71 % and 28.57 % compared to Case II and Case I, respectively. Case III has shown the highest CO 2 mitigation in comparison to Case II and Case I. The treated water achieved potable standards with a pH of 6.98, effective salinity removal, and a reduced TDS of 72 mg/L. Study highlights that integrating PHP, fogger, PCM, and fins into Case I significantly improves water yield, energy efficiency, and economic feasibility, contributing to sustainable water production.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Membrane Separation Technologies · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Water-energy nexus: cutting edge water desalination technologies and hybridized renewable-assisted systems; challenges and future roadmaps
2. Performance enhancement of modified solar distillers using synthetic nanocomposites, reflectors, cover cooling, and ultrasonic foggers: experimental approach10.1016/j.solener.2023.03.008 ↗
3. Integration of multi effect evaporation and membrane distillation desalination processes for enhanced performance and recovery ratios10.1016/j.desal.2020.114619 ↗
4. Evaluation of mechanical vapor recompression and easy multi-effect desalination systems in different climate conditions-sensitivity and 7E analysis10.1016/j.desal.2024.117601 ↗
5. An innovative multi-stage flash distillation unit integrated with evacuate tubes water heater and water mists: a (4E/2S) estimation10.1016/j.enconman.2025.119548 ↗
6. Study of a novel humidification-dehumidification desalination system hybridised with indirect evaporative cooling and vapour compression refrigeration
7. Performance study of a solar still desalination system coupled with solar air heater10.5004/dwt.2023.29279 ↗
8. Non-conventional solar stills Part 1. Non-conventional solar stills with charcoal particles as absorber medium10.1016/S0011-9164(02)01093-7 ↗
9. Thermo-economic performance enhancement of the hemispherical solar still integrated with various numbers of evacuated tubes
10. Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials10.1016/j.solener.2023.111896 ↗
11. Performance enhancement of tubular solar still using nano-enhanced energy storage material integrated with v-corrugated aluminum basin, wick, and nanofluid10.1016/j.est.2021.102933 ↗
12. Augmented performance of tubular solar still integrated with cost-effective nano-based mushrooms10.1016/j.solener.2021.09.034 ↗
13. Experimental investigation of inclined solar still with and without sand as energy storage materials10.1016/j.est.2023.109809 ↗
14. Comparative study on productivity of double slope solar still using different wick and energy storage materials10.1016/j.solener.2024.112959 ↗
15. Combined influence of fin, phase change material, wick, and external condenser on the thermal performance of a double slope solar still10.1016/j.jclepro.2020.125458 ↗
16. Exergy, environ–economic and economic analyses of a tubular solar water heater assisted solar still10.1016/j.jclepro.2018.12.015 ↗
17. Stepped solar Stills: a comprehensive review of Design, Performance, and optimization strategies for sustainable water desalination10.1016/j.solener.2024.113077 ↗
18. Enhancing desalination performance of a stepped solar still using nano-enhanced phase change material and condenser integration10.1016/j.solmat.2024.113141 ↗
19. Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: a detailed experimental investigation10.1016/j.est.2024.110555 ↗
20. Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system
21. Transient mathematical modelling and investigation of radiation and design parameters on the performance of multi-effect solar still integrated with evacuated tube collector
22. Solar still with evacuated tubes and calcium stones to enhance the yield: an experimental investigation10.1016/j.psep.2020.06.023 ↗
23. Design and performance of black painted Khes wick modified solar still: an experimental and 5E analysis10.1016/j.ijft.2023.100491 ↗
24. Performance evaluation of a modified pyramid solar still employing wick, reflectors, glass cooling and TiO2 nanomaterial10.1016/j.desal.2022.115939 ↗
25. Energy and exergy analysis of a new solar still composed of parabolic trough collector with built-in solar still10.1016/j.renene.2020.09.007 ↗
26. Augmentation of the tubular distiller performance via hot air injection from a parabolic trough collector with nanocoating and nanofluids10.1016/j.solener.2024.112743 ↗
27. Optimal size of spherical rock salt balls as low-cost thermal storage materials for performance augmentation of hemispherical solar distillers: experimental investigation and thermo-economic analysis10.1016/j.jclepro.2022.134006 ↗
28. Enhancement of pyramid-shaped solar stills performance using a high thermal conductivity absorber plate and cooling the glass cover10.1016/j.renene.2019.07.020 ↗
29. Experimentation and thermo-enviro-economic analysis of solar still coupled with large-capacity heating and cooling units10.1016/j.psep.2024.06.013 ↗
30. Thermal performance of heat pipe at different internal groove ratios and working fluids: an experimental investigation
31. Performance analysis of Prism shaped solar still using Black phosphorus quantum dot material and Lauric acid in composite climate: an experimental investigation10.1016/j.solener.2023.02.017 ↗
32. Experimental study of the role of surface tension in enhancing the performance of solar stills using different designs of plastic fins10.1016/j.solener.2023.111835 ↗
33. Finned-encapsulated PCM pyramid solar still–experimental study with economic analysis
34. Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis10.1007/s11356-021-13495-4 ↗
35. Impact of utilizing hollow copper circular fins and glass wool insulation on the performance enhancement of pyramid solar still unit: an experimental approach10.1016/j.solener.2022.06.029 ↗
36. An experimental investigation and thermo-economic performance analysis of solar desalination system by using nano-enhanced PCM
37. Aspects of energy, exergy, economy, and environment for performance evaluation of modified spherical solar still with rotating ball and phase change material10.1016/j.est.2024.110500 ↗
38. Improving the thermo-economic performance of hemispherical solar distiller using copper oxide nanofluids and phase change materials: experimental and theoretical investigation10.1016/j.solmat.2022.111596 ↗
39. Experimental investigations of a novel solar still with heat storage materials-energy, exergy, economic and environmental analyses10.1016/j.desal.2024.117467 ↗
40. Experimental study of activated carbon as a porous absorber in solar desalination with environmental, exergy, and economic analysis10.1016/j.psep.2021.01.031 ↗
41. Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials10.1016/j.solener.2023.111896 ↗
42. Performance evaluation of single slope solar still augmented with the ultrasonic fogger10.1016/j.energy.2019.116398 ↗
43. Energy, exergy, and economic analysis of single slope conventional solar still augmented with an ultrasonic fogger and a cotton cloth10.1016/j.est.2020.101541 ↗
44. 4-E analysis of pyramid solar still augmented with external condenser, evacuated tubes, nanofluid and ultrasonic foggers: a comprehensive study10.1016/j.psep.2022.06.026 ↗
45. Humidification dehumidification saline water desalination system utilizing high frequency ultrasonic humidifier and solar heated air stream
46. Experiment study of oscillating heat pipe and phase change materials coupled for thermal energy storage and thermal management10.1016/j.ijheatmasstransfer.2016.03.108 ↗
47. A comprehensive 4E (energy, exergy, economic, environmental) analysis of novel pyramid solar still coupled with pulsating heat pipe: an experimental study10.1016/j.renene.2024.120227 ↗
48. A novel energy storage system for latent heat recovery in solar still using phase change material and pulsating heat pipe10.1016/j.renene.2020.10.073 ↗
49. Experimental investigation of the effect of using water and ethanol as working fluid on the performance of pyramid-shaped solar still integrated with heat pipe solar collector10.1016/j.solener.2020.06.032 ↗
50. Improving solar still performance with heat pipe/pulsating heat pipe evacuated tube solar collectors and PCM: an experimental and environmental analysis10.1016/j.solener.2024.112371 ↗
51. Thermal properties optimization of lauric acid as phase change material with modified boron nitride nanosheets-sodium sulfate for thermal energy storage10.1016/j.est.2023.106781 ↗
52. Holman · 2011
53. Innovative solar distillation system with prismatic absorber basin: experimental analysis and LSTM machine learning modeling coupled with great wall construction algorithm10.1016/j.psep.2024.04.063 ↗
54. Energy payback time, exergoeconomic and enviroeconomic analyses of using thermal energy storage system with a solar desalination system: an experimental study10.1016/j.jclepro.2020.122082 ↗
55. Energy, exergy, economic and enviroeconomic (4E) analyses of solar distillation system using different absorbing materials10.1016/j.applthermaleng.2019.01.005 ↗
56. Distilled water production with combination of solar still and thermosyphon heat pipe heat exchanger coupled with indirect water bath heater–experimental study and thermoeconomic analysis10.1016/j.applthermaleng.2020.115437 ↗
57. Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser10.1016/j.est.2022.105462 ↗
58. A comparative study of various fatty acids as phase change material to enhance the freshwater productivity of solar still10.1016/j.est.2021.103947 ↗