Enhancing tubular solar still productivity: A novel rotational absorber, ultrasonic atomizer, and hygroscopic fabric integration
Source abstract
Abstract
Freshwater scarcity is a growing global challenge, particularly in regions with abundant solar energy but limited access to clean water. Conventional solar stills offer a sustainable solution for freshwater production but suffer from low productivity and efficiency, limiting their practical application. This study addresses these limitations by introducing a novel tubular solar still design with operational enhancements aimed at significantly improving freshwater productivity and thermal efficiency . Key innovations include a centrally suspended rectangular absorber plate with an adjustable rotational mechanism, microcontroller-regulated rotational velocity control, and an ultrasonic atomizer at the still's apex to intermittently disperse water droplets for enhanced evaporation. Hygroscopic burlap fabrics (cotton and jute) were layered on the absorber to amplify surface evaporation. Comprehensive experiments optimized rotational speeds (0–2 rpm) and atomizer duty cycles (fixed 1-min activation with varied deactivation intervals: 2–10 min) to maximize freshwater yield through parametric refinement of rotational dynamics and misting cycles. Key parameters contributing to the system's performance include thermal efficiency , freshwater yield, cost-effectiveness, environmental impact, and durability. Experimental results demonstrated that the modified tubular solar distiller (MTSD) with a rotational suspended absorber increased freshwater yield by 18 % compared to the reference system (RTSD). Jute cloth outperformed cotton, achieving a 90 % productivity improvement versus 82 % for cotton. Optimal performance occurred under conditions combining jute cloth, 1 rpm rotation, and an atomizer duty cycle of 1 min ON/8 min OFF, yielding a 97 % productivity increase (6795 mL/m 2 for MTSD versus 3450 mL/m 2 for RTSD) and 49 % thermal efficiency, significantly surpassing the RTSD baseline. Life-cycle cost analysis demonstrated a 52 % reduction in unit production costs for the MTSD configuration with jute-based rotational operation (1 rpm), achieving 0.013/L, compared to 0.025/L for RTSD. These results underscore the efficacy of the design enhancements in maximizing solar still productivity, offering a promising solution to address freshwater scarcity in resource-limited settings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Membrane Separation Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Low-temperature desalination driven by waste heat of nuclear power plants: a thermo-economic analysis10.1016/j.desal.2024.117325 ↗
2. Thermal desalination systems: from traditionality to modernity and development
3. Critical issues on advancements and challenges in HDH desalination units10.1016/j.rineng.2024.102180 ↗
4. Advancing solar distillation efficiency through calcium hydroxide coating and enhanced configuration of mirror-assisted system
5. Experimental investigation of corrugated absorber solar still with wick and reflectors10.1016/j.desal.2015.12.001 ↗
6. Improving the drum solar still performance using corrugated drum and nano-based phase change material10.1016/j.est.2022.105647 ↗
7. A review on PCM and nanofluid for various productivity enhancement methods for double slope solar still: future challenge and current water issues10.1016/j.desal.2022.116367 ↗
8. A feasibility study of solar energy-techno economic analysis from aksaray city, Turkey
9. Hydrogen production through alkaline electrolyzers: a techno-economic and enviro-economic analysis10.1002/ceat.202200234 ↗
10. Enhancing water evaporation rate in hemispherical solar distillers through innovative modifications and Nano-PCM integration10.1016/j.solener.2024.112453 ↗
11. Performance prediction of a reverse osmosis unit using an optimized Long Short-term Memory model by hummingbird optimizer10.1016/j.psep.2022.10.071 ↗
12. Performance evaluation of a humidification-dehumidification unit integrated with wick solar stills under different operating conditions10.1016/j.desal.2018.04.024 ↗
13. Performance and control of a reverse osmosis unit integrated with Pelton Wheel to supply emergency electric loads under various operating conditions10.1186/s42834-023-00183-w ↗
14. Enhancing rotating wick solar still performance with various porous breathable belt designs and nanofluid10.1016/j.csite.2023.103205 ↗
15. Thermal performance evaluation for two designs of flat-plate solar air heater: an experimental and CFD investigations10.3390/pr11041227 ↗
16. Improving the performance of trays solar still by using sand beds and reflectors10.1016/j.aej.2023.03.084 ↗
17. An experimental case study on development the design and the performance of indirect solar dryer type for drying bananas10.1016/j.solener.2023.03.023 ↗
18. A review on recent advances in humidification-dehumidification (HDH) desalination systems integrated with refrigeration, power and desalination technologies10.1016/j.enconman.2019.06.063 ↗
19. Pyramid solar distillers: a comprehensive review of recent techniques10.1016/j.rineng.2023.101157 ↗
20. Innovative integration: enhancing solar distillation efficiency with modified spherical solar stills10.1016/j.desal.2024.117388 ↗
21. An enhanced productivity prediction model of active solar still using artificial neural network and Harris Hawks optimizer10.1016/j.applthermaleng.2020.115020 ↗
22. Energy, exergy, economic, and environmental prospects of solar distiller with three-vertical stages and thermo-storing material
23. Advanced techniques for enhancing solar distiller productivity: a review
24. Experimental study of the impact of low-cost energy storage materials on the performance of solar distillers at different water depths10.1016/j.solener.2023.04.013 ↗
25. Experimental study with thermal and economical analysis for some modifications on cylindrical sector and double slope, single basin solar still10.1016/j.csite.2023.103310 ↗
26. Revealing prediction of perched cum off-centered wick solar still performance using network based on optimizer algorithm10.1016/j.psep.2022.03.009 ↗
27. Effect of different wick materials on solar still performance–a review10.1080/01430750.2018.1563808 ↗
28. Effect of fins and silicon dioxide nanoparticle black paint on the absorber plate for augmenting yield from tubular solar still10.1007/s11356-021-13126-y ↗
29. Productivity prediction of a spherical distiller using a machine learning model and triangulation topology aggregation optimizer10.1016/j.desal.2024.117744 ↗
30. Innovative configurations for spherical solar distillation: ball rotation and preheating for improved productivity10.1016/j.csite.2024.104489 ↗
31. Augmenting the performance of pyramid distiller via conical absorbing surface, reflectors, condenser, and thermal storing material10.1016/j.est.2022.105597 ↗
32. The cooling techniques of the solar stills' glass covers – a review10.1016/j.rser.2017.04.085 ↗
33. Applications of nanofluids in solar energy: a review of recent advances10.1016/j.rser.2017.10.108 ↗
34. Enhancement of the yield of solar still with the use of solar pond: a review10.1002/htj.21935 ↗
35. Solar still with rotating parts: a review10.1007/s11356-021-15899-8 ↗
36. Solar still with condenser - a detailed review10.1016/j.rser.2016.01.020 ↗
37. Innovative solar distillation system with prismatic absorber basin: experimental analysis and LSTM machine learning modeling coupled with great wall construction algorithm10.1016/j.psep.2024.04.063 ↗
38. Utilization of ensemble random vector functional link network for freshwater prediction of active solar stills with nanoparticles
39. Enhancing the performance of tubular solar stills for water purification: a comprehensive review and comparative analysis of methodologies and materials10.1016/j.rineng.2023.101722 ↗
40. Rotating discs solar still: new mechanism of desalination10.1016/j.jclepro.2020.123200 ↗
41. Aspects of energy , exergy , economy , and environment for performance evaluation of modified spherical solar still with rotating ball and phase change material10.1016/j.est.2024.110500 ↗
42. Energy, exergy and cost analysis of different hemispherical solar distillers: a comparative study10.1016/j.solmat.2023.112187 ↗
43. Enhancing trays solar still performance using wick finned absorber, nano- enhanced PCM10.1016/j.aej.2022.06.033 ↗
44. Machine learning-based prediction and augmentation of dish solar distiller performance using an innovative convex stepped absorber and phase change material with nanoadditives10.1016/j.psep.2022.03.052 ↗
45. Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths10.1007/s11356-021-18295-4 ↗
46. Improving the vertical solar distiller performance using rotating wick discs and integrated condenser10.1007/s11356-022-19873-w ↗
47. Experimental investigation of vertical solar still with rotating discs
48. Wall-suspended trays inside stepped distiller with Al2O3/paraffin wax mixture and vapor suction: experimental implementation10.1016/j.est.2020.102008 ↗
49. Performance enhancement of stepped basin solar still based on OSELM with traversal tree for higher energy adaptive control10.1016/j.desal.2020.114926 ↗
50. Augmenting the productivity of stepped distiller by corrugated and curved liners, CuO/paraffin wax, wick, and vapor suctioning10.1007/s11356-021-14669-w ↗
51. Performance evaluation of a vertical rotating wick solar still10.1016/j.psep.2021.02.004 ↗
52. Applications of nanotechnology in renewable energies - a comprehensive overview and understanding10.1016/j.rser.2014.10.027 ↗
53. A review of the application of hybrid nanofluids in solar still energy systems and guidelines for future prospects10.1016/j.solener.2024.112485 ↗
54. Rotating-drum solar still with enhanced evaporation and condensation techniques: comprehensive study10.1016/j.enconman.2019.112024 ↗
55. Improving the performance of tubular solar still using rotating drum – experimental and theoretical investigation10.1016/j.psep.2020.11.039 ↗
56. Experimental study on tubular solar still using Graphene Oxide Nano particles in Phase Change Material (NPCM's) for fresh water production10.1016/j.est.2020.101204 ↗
57. Experimental investigation of convex tubular solar still performance using wick and nanocomposites10.1016/j.csite.2021.101368 ↗
58. Performance enhancement of a tubular solar still by using stepped basins: an experimental approach10.1016/j.jclepro.2024.140746 ↗
59. Floating solar stills and floating solar-driven membranes: recent advances and overview of designs, performance and modern combinations10.1016/j.solener.2022.10.044 ↗
60. Enhancement of hemispherical solar still productivity using iron, zinc and copper trays10.1016/j.solener.2021.01.038 ↗
61. Comparative performance of spherical, hemispherical, and single-sloped solar distillers10.1016/j.dwt.2024.100051 ↗
62. Hemispherical solar still: recent advances and development10.1016/j.egyr.2022.06.037 ↗
63. Inverted solar stills: a comprehensive review of designs, mathematical models, performance, and modern combinations
64. Experimental study on the performance of pyramid solar still with novel convex and dish absorbers and wick materials10.1016/j.jclepro.2022.133835 ↗
65. Augmenting the distillate yield of cords pyramid distiller with baffles within compartments10.1016/j.jclepro.2022.131761 ↗
66. Modeling and optimization of working conditions of pyramid solar still with different nanoparticles using response surface methodology10.1016/j.csite.2022.101984 ↗
67. Improving the performance of pyramid solar distiller using dangled cords of various wick materials: novel working mechanism of wick10.1016/j.csite.2021.101550 ↗
68. An inclusive study on new conceptual designs of passive solar desalting systems10.1016/j.heliyon.2020.e05793 ↗
69. Analysis for optimized prerequisites of modified solar stills
70. Experimental study of stepped solar still integrated with reflectors and external condenser10.1080/08916152.2014.890964 ↗
71. Enhancing the wick solar still performance using half barrel and corrugated absorbers10.1016/j.psep.2021.04.036 ↗
72. Performance improvement of tubular solar still via tilting glass cylinder, nano-coating, and nano-PCM: experimental approach10.1007/s11356-022-20207-z ↗
73. Experimental investigation of a new design of drum solar still with reflectors under different conditions10.1016/j.csite.2021.100850 ↗
74. Enhancement of pyramid solar distiller performance using reflectors, cooling cycle, and dangled cords of wicks10.1016/j.desal.2021.115019 ↗
75. Enhancing the solar still performance using reflectors and sliding-wick belt10.1016/j.solener.2020.11.016 ↗
76. Samsher, A review study of solar desalting units with evacuated tube collectors10.1016/j.jclepro.2020.123542 ↗
77. Optimum techno-eco performance requisites for vacuum annulus tube collector–assisted double-slope solar desaltification unit integrated modified parabolic concentrator10.1007/s11356-021-18426-x ↗
78. Mathematical analysis of optimized requisites for novel combination of solar distillers10.1016/j.jer.2023.100121 ↗
79. Samsher, Parametric analysis of evacuated annular parabolic solar receiver integrated solar stills: a relative optimization approach10.1007/s10668-024-04709-z ↗
80. Enhancing water productivity and cost-effectiveness in hemispherical solar stills using sandy beds, reflectors, and a vapor extraction fan10.1016/j.rineng.2024.101983 ↗
81. Experimental enhancement of tubular solar still performance using rotating cylinder, nanoparticles' coating, parabolic solar concentrator, and phase change material10.1016/j.csite.2021.101705 ↗
82. Using aluminium powder with PCM (paraffin wax) to enhance single slope solar water distiller productivity in Baghdad - Iraq winter weathers
83. Experimental investigation on the yield of solar still using manganese oxide nanoparticles coated absorber10.1016/j.csite.2021.100905 ↗
84. Enhancing the solar still performance via rotating wick belt and quantum dots nanofluid10.1016/j.csite.2021.101222 ↗
85. Improving the performance of pyramid solar still using rotating four cylinders and three electric heaters10.1016/j.psep.2021.02.022 ↗
86. Numerical investigation of modified solar still using nanofluids and external condenser10.1016/j.jtice.2017.01.017 ↗
87. Enhancement of modified solar still integrated with external condenser using nanofluids: an experimental approach10.1016/j.enconman.2013.11.013 ↗
88. Analysis for modified augmentation of solar desalination assisted water heating system: energy-matrices and environ-economics10.1016/j.solener.2024.113120 ↗
89. Samsher, Techno-environ-economic-energy-exergy-matrices performance analysis of evacuated annulus tube with modified parabolic concentrator assisted single slope solar desalination system10.1016/j.jclepro.2021.129996 ↗
90. Modeling of a modified solar still system with enhanced productivity10.1016/j.solener.2015.12.025 ↗
91. Productivity enhancements of compound parabolic concentrator tubular solar stills10.1016/j.renene.2015.11.051 ↗
92. Effect of phase change material on concentric circular tubular solar still-Integration meets enhancement10.1016/j.desal.2017.03.035 ↗
93. Water solar distiller productivity enhancement using concentrating solar water heater and phase change material (PCM)10.1016/j.csite.2015.03.009 ↗
94. Improving the performance of a parabolic concentrator solar tracking-tubular solar still (PCST-TSS) using gravel as a sensible heat storage material10.1016/j.desal.2019.114182 ↗
95. Modeling of a novel concentrated solar still enhanced with a porous evaporator and an internal condenser10.1016/j.solener.2015.01.021 ↗
96. Jute fibre reinforced biocomposite: seawater immersion effects on tensile properties and its application in a ship hull design by finite-element analysis10.1016/j.oceaneng.2023.116301 ↗
97. Effect of cotton fabric properties on fiber release and marine biodegradation10.1177/00405175211068781 ↗
98. Acetylation of natural fibers to improve performance10.1080/15421400490479244 ↗
99. Holman · 2011
100. Enhanced solar still operation using a copper coil heat exchanger and phase change material integration10.1016/j.est.2025.115557 ↗