Use of Cu ribbons and Cu-Ag HJT cell metallization on ECA based interconnection for PV modules
Source abstract
Abstract
The availability of Silver is probably the main concern for PV cell's metallization and interconnection. It is then a critical element in most scenarios at the terawatt scale, reducing its usage is hence of prime interest. As a low temperature method, Electrically Conductive Adhesives (ECA) curing process has proved its worth in recent years. This interconnection technology shows also the advantage of high mechanical performances. This paper highlights the latest results obtained on the interconnection of HJT solar cells with ECA bonding material, focusing on the silver consumption reduction by the use of the latest generation of low-silver ECAs. In this study, three different ECA formulations were compared and investigated, ensuring their compatibility with ribbon coated by different conductive materials (Ag, SnAg and bare Cu). Finally, the introduction of Cu-Ag pastes for cell metallization was evaluated. We show that the new low-silver ECAs can even outperform previous-generation ECAs demonstrating higher performance and reliability. We also show a slight drop in performance of these new ECAs in combination with Sn/Cu ribbons, maintaining the reliability. Combining low-Ag ECAs with Sn ribbons can result in a silver content reduction of 6 mg/Wp, and even up to 8 mg/Wp with bare Cu ribbons to reach 14mg/Wp total consumption in the module. • PV module with less than 14 mg/Wp silver • Improved reliability with degradation in climatic chamber below 2 % after 2000h Damp Heat and 400 Thermal cycling • Lead and Bismuth free PV cell interconnection technology • Low temperature process adapted to HJT and Tandem cells
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Photovoltaics at multi-terawatt scale: waiting is not an option10.1126/science.adf6957 ↗
2. International Technology Roadmap for Photovoltaic (ITRPV), (2022 results) - 14. Edition, April 2023, p.1-2.
3. Ritchie · Energy, Our World Data · 2023
4. 2021
5. Global energy system based on 100% renewable energy—power, heat, transport and desalination
6. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
7. Photovoltaics at multi-terawatt scale: waiting is not an option10.1126/science.adf6957 ↗
8. The silver learning curve for photovoltaics and projected silver demand for net-zero emission by 205010.1002/pip.3661 ↗
9. Latest advances of ECA-based tabbing and stringing at CEA-INES
10. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
11. «Material bottlenecks in the future development of green technologies10.1016/j.rser.2018.05.041 ↗
12. 2022
13. Global status of recycling waste solar panels: a review10.1016/j.wasman.2018.01.036 ↗
14. Cho · 2019
15. https://iea.blob.core.windows.net/assets/a86b480e-2b03-4e25-bae1-a1395e0b620/EnergyTechnologyPerspectives2023.pdf.
16. Non-oxidized bare copper nanoparticles with surface excess electrons in air10.1038/s41565-021-01070-4 ↗
17. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials10.1039/c0jm00264j ↗
18. The theory of thermodynamics for chemical reactions in dispersed heterogeneous systems10.1006/jcis.1997.4911 ↗
19. Copper-baser Metallization Approaches for drastic reduction of silver content
20. C. M. Liu et al 2005 J. Electrochem. Soc. 152 G234, DOI 10.1149/1.1860511.10.1149/1.1860511 ↗
21. Nature of doped a-Si: H/c-Si interface recombination10.1063/1.3129578 ↗
22. Low-temperature metallization & interconnection for silicon heterojunction and perovskite silicon tandem solar cells10.1016/j.solmat.2023.112515 ↗
23. Shingling meets perovskite-silicon heterojunction tandem solar cells10.1016/j.solmat.2023.112590 ↗
24. Mechanical reliability of fullerene/tin oxide interfaces in monolithic perovskite/silicon tandem cells10.1021/acsenergylett.1c02148 ↗
25. Pathways toward commercial perovskite/silicon tandem photovoltaics10.1126/science.adh3849 ↗
26. 400W in Shingle SHJ configuration: promising optimization path for high power modules
27. V.Barth & Al, Electrically Conductive Adhesive industrial strategy approach for HJT solar cells, November 2022, AIP Conference Proceedings ; Proceedings of the 10th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells, DOI: 10.1063/5.0126230.10.1063/5.0126230 ↗
28. Basset · 2018 · 721
29. Methodology for electrically conductive adhesive qualification
30. www.ines-solaire.org/en/news/stroke-accelerates-the-ageing-of-solar-panels-to-improve-their-reliability/.
31. ‘Systematic PV-module optimization with the cell-to-module (CTM) analysis software “SmartCalc
32. C.Carrière A.Bettinelli, B.Hladys, C.Lucas, S.Harrison, N.Gazbour, E.Voroshazi, Industrial and Sustainable Strategy for Heterojunction Interconnection, WCPEC-8
33. Printing technologies for silicon solar cell metallization: A comprehensive review
34. Optimizing the solar cell front side metallization and the cell interconnection for high module power output10.1016/j.egypro.2016.07.137 ↗
35. A cell-to-module modelling tool applied to optimization of metallization and interconnection of high-efficiency bifacial silicon heterojunction solar module10.1063/5.0057000 ↗