journal article·2025-04

Composite phase change materials made from cellulose that possess high energy storage capacity and outstanding photothermal conversion properties

Lan Dong, Xichao Wang, Xiaoxiao Yu, Chuanhui Zhou, Zihua Wu, Yuanyuan Wang, Yongjie Cui, Yihuai Li, Huaqing Xie

Publisher page

Abstract

The shape stable phase-change composite materials (PCMs) are attracting considerable interest because of their excellent thermodynamics efficiency and stability. In this work, we synthesized a series of CDA/PEG and CDA/PEG/GO composite PCMs made from cellulose diacetate (CDA), polyethylene glycol (PEG), and oxygenated graphene (GO) by employing solution blending and ultrasonic dispersion techniques. The latent heat of PCMs is facilitated by PEG, whereas skeletal support and light absorption are provided by CDA and GO, respectively. The experimental results show that after an hour of heating at 80 °C, the combined PCMs present outstanding stability of form and do not leak. At the same time, the PCMs exhibit good thermal stability approach to 300 °C. For CDA/PEG composite phase change materials, with PEG mass fraction reaches 85.7 %, the maximum melting enthalpy and crystallization enthalpy are 145.43 J/g and 139.36 J/g, respectively. For the CDA/PEG/GO composite phase change materials, with PEG mass fraction reaches 85.7 % and GO reaches 3.0 %, achieving photothermal conversion approach to 96.8 %. In conclusion, the CDA/PEG/GO composite PCMs exhibit broad potential for applications in thermal energy storage and solar energy utilization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)10.1016/j.rser.2009.10.015 ↗
2. Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook10.1016/j.rser.2014.12.003 ↗
3. Carbon based material included-shaped stabilized phase change materials for sunlight-driven energy conversion and storage: an extensive review10.1016/j.solener.2018.05.007 ↗
4. Review of the application of phase change material for heating and domestic hot water systems10.1016/j.rser.2014.09.034 ↗
5. Review of phase change emulsions (PCMEs) and their applications in HVAC systems10.1016/j.enbuild.2015.03.003 ↗
6. Hydrophobic multilayered PEG@ PAN/MXene/PVDF@ SiO2 composite film with excellent thermal management and electromagnetic interference shielding for electronic devices10.1002/smll.202402938 ↗
7. Polyimide/boron nitride composite aerogel fiber-based phase-changeable textile for intelligent personal thermoregulation10.1016/j.compscitech.2022.109541 ↗
8. A thermoregulatory flexible phase change nonwoven for all-season high-efficiency wearable thermal management10.1007/s40820-022-00991-6 ↗
9. A phase change supramolecular assembly with a rapid self-healing behavior via thermally actuated reversible associations10.1016/j.cej.2022.139967 ↗
10. Radiation-enhanced self-cascade catalytic Ti3C2Tx-based platform enables controlled release of trans-resveratrol for synergistic radiosensitization against metastasis of orthotopic breast cancer10.1016/j.nantod.2023.101836 ↗
11. High-chain fatty acid esters of 1-octadecanol as novel organic phase change materials and mathematical correlations for estimating the thermal properties of higher fatty acid esters' homologous series10.1016/j.solmat.2013.01.024 ↗
12. Study on transition characteristics of PEG/CDA solid–solid phase change materials10.1016/S0032-3861(01)00613-9 ↗
13. Natural aging of shape stabilized phase change materials based on paraffin wax10.1016/j.polymertesting.2017.09.027 ↗
14. Preparation and characterization of cross-linking PEG/MDI/PE copolymer as solid–solid phase change heat storage material10.1016/j.solmat.2007.01.011 ↗
15. Facile strategy in designing epoxy/paraffin multiple phase change materials for thermal energy storage applications10.1021/acssuschemeng.7b03558 ↗
16. Thermal energy storage properties of mannitol–fatty acid esters as novel organic solid–liquid phase change materials10.1016/j.enconman.2012.07.003 ↗
17. Synthesis and thermal properties of polystyrene-graft-PEG copolymers as new kinds of solid–solid phase change materials for thermal energy storage10.1016/j.matchemphys.2011.12.056 ↗
18. A gelatin/PLA-b-PEG film of excellent gas barrier and mechanical properties10.1007/s10965-018-1600-9 ↗
19. Incubation period induced biogenic synthesis of PEG enhanced Moringa oleifera silver nanocapsules and its antibacterial activity10.1007/s10965-019-1897-z ↗
20. Hydrothermal carbon‐doped polyethylene glycol as phase‐change materials with good thermal conductivity and shape‐stability10.1002/slct.201903969 ↗
21. PEG/3D graphene oxide network form-stable phase change materials with ultrahigh filler content10.1039/C9TA07629H ↗
22. Graphene-oxide-induced lamellar structures used to fabricate novel composite solid-solid phase change materials for thermal energy storage10.1016/j.cej.2019.01.097 ↗
23. Thermal properties and shape stabilization of epoxidized methoxy polyethylene glycol composite PCMs tailored by polydopamine-functionalized graphene oxide10.1016/j.solmat.2019.110388 ↗
24. Cellulosic scaffolds doped with boron nitride nanosheets for shape-stabilized phase change composites with enhanced thermal conductivity10.1016/j.ijbiomac.2020.01.173 ↗
25. Poly (ethylene glycol)-grafted nanofibrillated cellulose/graphene hybrid aerogels supported phase change composites with superior energy storage capacity and solar-thermal conversion efficiency10.1007/s10570-020-03110-z ↗
26. Develo∗∗ a poly (ethylene glycol)/cellulose phase change reactive composite for cooling application10.1016/j.solmat.2018.11.038 ↗
27. Facile preparation of polyethylene glycol/wood-flour composites as form-stable phase change materials for thermal energy storage10.1007/s10973-019-08394-3 ↗
28. Shape-stabilized phase change material/nylon composite based on recycled diatomite10.1016/j.matchemphys.2019.122498 ↗
29. Preparation and characterization of poly (N-methylol acrylamide)/polyethylene glycol composite phase change materials for thermal energy storage10.1016/j.solmat.2019.110248 ↗
30. PEG encapsulated by porous triamide-linked polymers as support for solid-liquid phase change materials for energy storage10.1016/j.cplett.2017.01.028 ↗
31. One-step strategy to construct GA/PEG shape-stabilized phase change material with excellent thermophysical properties10.1016/j.diamond.2020.107716 ↗
32. Preparation and characterization of novel phase-change concrete based on different porous phase-change aggregates: comprehensive comparison of various phase change composites10.1016/j.conbuildmat.2024.137366 ↗
33. High-flexible phase change composites with enhanced thermal conductivity for electronic thermal management10.1021/acsapm.3c02404 ↗
34. Efficient preparation of GO-modified regular spherical SiO2@ CaCl2· 6H2O phase change microcapsules for enhanced thermal energy storage10.1016/j.est.2024.110727 ↗
35. Biomass waste lotus shell-based shape-stabilized phase change composites with improved thermal conductivity for thermal management
36. Hazelnut shell-based activated carbon/carbon nanotubes/palmityl alcohol as new form-stable phase change material with enhanced energy storage capacity and thermal conductivity10.1016/j.est.2024.114346 ↗
37. Waste pomelo peels-derived ultralow density 3D-porous carbon aerogels: mechanisms of “Soft-rigid” structural formation and solar-thermal energy storage conversion10.1016/j.solmat.2023.112453 ↗
38. Melamine foam/CNT/graphene hybrid aerogel-based phase change composites with high latent heat capacity for solar/electrothermal conversion10.1021/acsaem.3c00796 ↗
39. MXene-modified bio-based pitaya peel foam/polyethylene glycol composite phase change material with excellent photo-thermal conversion efficiency, thermal energy storage capacity and thermal conductivity10.1016/j.est.2023.110089 ↗
40. Ultra-light and flexible graphene aerogel-based form-stable phase change materials for energy conversion and energy storage10.1016/j.solmat.2022.112176 ↗
41. The crystallization behavior of poly (ethylene glycol)-poly (ε-caprolactone) diblock copolymers with asymmetric block compositions10.1007/s10965-011-9626-2 ↗
42. Graphene oxide stabilized polyethylene glycol for heat storage10.1039/c2cp41988b ↗
43. Preparation and performances of form-stable polyethylene glycol/methylcellulose composite phase change materials10.1007/s10965-020-02150-0 ↗
44. Improvement of shape stability and thermal properties of PCM using polyethylene glycol (PEG)/sisal fiber cellulose (SFC)/graphene oxide (GO)10.1007/s12221-017-7093-z ↗
45. Graphene oxide with different oxygen content produced from natural and synthetic graphite sources for methylene blue sorption10.1016/j.diamond.2024.111550 ↗
46. “Back‐to‐Back” radial layered skeleton converging heat flow to assist in thermal conduction of aramid nanofibers/graphene phase change composite materials
47. NiCo @ EG-based composite PCMs with boosted thermal conductivity and photothermal conversion efficiency for solar energy harvesting10.1016/j.solmat.2024.113151 ↗
48. Novel phase change materials with superior thermal conductivity and photothermal efficiency derived from preservative-treated wood biochar10.1016/j.renene.2024.121724 ↗
49. Fabrication of boron nitride/copper oxide@ multi-walled carbon nanotubes composites for enhancing heat transfer and photothermal conversion of phase change materials10.1016/j.arabjc.2024.105997 ↗