Hydrodynamic and reaction kinetic responses of CaO/CaCO3 carbonation in bubbling fluidized bed reactors for thermochemical energy storage: Influence of CO2 mole fraction, grain size, and reactor dimensions
Source abstract
Abstract
The CaO/CaCO 3 thermochemical energy storage system offers a promising method for the efficient utilization of solar energy. However, the reactor design remains underdeveloped. In this study, the Eulerian-Eulerian two-fluid model is employed to systematically investigate the effects of CO 2 mole fraction, particle size, and reactor dimensions on the carbonation process in a bubbling fluidized bed reactor. Increasing the CO 2 mole fraction from 50 % to 80 % reduces the duration of the chemical-reaction-kinetics controlled stage from 118.5 s to 65.3 s, and the transition stage from 64.6 s to 36.7 s, with minimal impact on the final conversion rate. High CO 2 concentrations cause insufficient bed fluidization and uneven local conversion rate distribution within the bed. As the grain size increases from 150 nm to 300 nm and 600 nm, the duration of the chemical-reaction-kinetics controlled stage decreases from 118.5 s to 104.0 s and 76.2 s, respectively. This causes the reaction to enter the transition phase earlier, ultimately leading to a reduction in the maximum conversion rate. Altering the height and width of the reactor does not significantly impact the conversion processes within the reactor. These findings provide valuable insights for the optimization and practical industrial application of efficient reactors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chemical Looping and Thermochemical Processes · Adsorption and Cooling Systems · Carbon Dioxide Capture Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Perspective of concentrating solar power10.1016/j.energy.2020.117373 ↗
2. Applicability of carbonation/decarbonation reactions to high-temperature thermal energy storage and temperature upgrading10.1252/jcej.29.119 ↗
3. Modeling of energy carrier in solar-driven calcium-looping for thermochemical energy storage: heat-mass transfer, chemical reaction and stress response10.1016/j.cej.2023.142435 ↗
4. Calcium-based composites for direct solar-thermal conversion and thermochemical energy storage10.1016/j.cej.2019.122815 ↗
5. Accurate control of cage-like CaO hollow microspheres for enhanced CO2 capture in calcium looping via a template-assisted synthesis approach10.1021/acs.est.8b06138 ↗
6. Review on the development of sorbents for calcium looping10.1021/acs.energyfuels.0c00682 ↗
7. Hierarchically porous calcium-based composites synthesized by eggshell membrane templating for thermochemical energy storage of concentrated solar power10.1016/j.est.2022.104769 ↗
8. Thermochemical energy storage performance of papermaking soda residue during CaO-CaCO3 cycles10.1016/j.jcou.2022.102072 ↗
9. Solar-driven calcium looping in fluidized beds for thermochemical energy storage10.1016/j.cej.2023.142708 ↗
10. Material development and assessment of an energy storage concept based on the CaO-looping process10.1016/j.solener.2017.04.058 ↗
11. High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants10.1016/j.apenergy.2018.10.131 ↗
12. Low-cost Ca-based composites synthesized by biotemplate method for thermochemical energy storage of concentrated solar power10.1016/j.apenergy.2017.10.109 ↗
13. Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure10.1016/j.apenergy.2020.114650 ↗
14. Reaction performance of CaCO3/CaO thermochemical energy storage with TiO2 dopant and experimental study in a fixed-bed reactor10.1016/j.energy.2021.121451 ↗
15. Investigating the effects of ZnO dopant on the thermodynamic and kinetic properties of CaCO3/CaO TCES system10.1016/j.energy.2020.119132 ↗
16. Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture10.1021/ie1012745 ↗
17. Study on flow characteristics of turbulent fluidized bed with variable gas velocity due to chemical reactions10.1016/j.powtec.2022.118211 ↗
18. Hydrogen by sorption enhanced methane reforming: a grain model to study the behavior of bi-functional sorbent-catalyst particles10.1016/j.ces.2016.03.042 ↗
19. Computational investigation of solid sorbent carbon dioxide capture in a fluidized bed reactor10.1016/j.powtec.2015.01.067 ↗
20. Numerical simulation of a bubbling fluidized bed reactor for sorption-enhanced steam methane reforming under industrially relevant conditions: effect of sorbent (dolomite and CaO-Ca12Al14O33) and operational parameters10.1016/j.fuproc.2019.01.003 ↗
21. Conceptual process design of a CaO/Ca (OH)2 thermochemical energy storage system using fluidized bed reactors10.1016/j.applthermaleng.2014.08.065 ↗
22. Design of a MW-scale thermo-chemical energy storage reactor10.1016/j.egyr.2018.07.005 ↗
23. Calcium-looping for thermochemical energy storage in concentrating solar power applications: evaluation of the effect of acoustic perturbation on the fluidized bed carbonation10.1016/j.cej.2019.123658 ↗
24. Fluidized bed reactors for solid-gas thermochemical energy storage concepts-Modelling and process limitations10.1016/j.energy.2017.11.065 ↗
25. Energy storage and attrition performance of limestone under fluidization during CaO/CaCO3 cycles10.1016/j.energy.2020.118291 ↗
26. Solar calcination at pilot scale in a continuous flow multistage horizontal fluidized bed10.1016/j.solener.2020.06.098 ↗
27. Investigation of hydration/dehydration processes in a fluidized bed reactor using MgO/Mg (OH)2 thermochemical energy storage system10.1016/j.solener.2021.12.013 ↗
28. A generalized method for predicting the minimum fluidization velocity10.1002/aic.690120343 ↗
29. Evaluation of correlations for minimum fluidization velocity (Umf) in gas-solid fluidization10.1016/j.powtec.2017.10.016 ↗
30. Numerical simulation of fluidized bed reactor for calcium looping energy release process in thermochemical storage: influence of key conditions10.1016/j.renene.2024.121532 ↗
31. CO2 capture with calcined dolomite: the effect of sorbent particle size10.1007/s13399-011-0018-y ↗
32. CaO carbonation kinetics determined using micro-fluidized bed thermogravimetric analysis10.1016/j.fuel.2019.116823 ↗
33. Grid independence behaviour of fluidized bed reactor simulations using the Two Fluid Model: effect of particle size10.1016/j.powtec.2014.08.055 ↗
34. Ghandriz · 2016
35. Flow behavior and heat transfer in bubbling fluidized-bed with immersed heat exchange tubes for CO2 methanation10.1016/j.powtec.2020.11.027 ↗
36. Numerical investigation of bed-to-tube heat transfer in a shallow fluidized bed containing mixed-size particles10.1016/j.ijheatmasstransfer.2023.124252 ↗
37. Lemmon · 2018
38. Studies on thermophysical properties of CaO and MgO by γ-ray attenuation10.1155/2014/123478 ↗
39. A numerical model of transient thermal transport phenomena in a high-temperature solid–gas reacting system for CO2 capture applications10.1016/j.ijheatmasstransfer.2015.01.124 ↗
40. CFD simulation of CO2 sorption on K2CO3 solid sorbent in novel high flux circulating-turbulent fluidized bed riser: parametric statistical experimental design study10.1016/j.apenergy.2016.12.110 ↗
41. Gidaspow · 1994
42. Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield10.1017/S0022112084000586 ↗
43. Comparative analysis of CFD models of dense gas–solid systems10.1002/aic.690470510 ↗
44. Hydrodynamics of circulating fluidized beds: kinetic theory approach, Illinois Inst. of Tech., Chicago, IL (United States)
45. Collisional viscosity of FCC particles in a CFB10.1002/aic.690420910 ↗
46. Computer simulation of bubbles in a fluidized bed
47. Mechanics of fluidization, fluid particle technology
48. Hydrodynamics of fluidization: prediction of wall to bed heat transfer coefficients10.1002/aic.690310115 ↗
49. Review—calcination and carbonation of limestone during thermal cycling for CO2 sequestration10.1016/j.fuproc.2005.01.023 ↗
50. Carbonation kinetics of calcium-based solids at the centimeter scale for moving bed applications10.1016/j.ces.2024.119750 ↗
51. The effect of pore structure on fluid‐solid reactions: application to the SO2‐lime reaction10.1002/aic.690270209 ↗
52. A structural model for gas—solid reactions with a moving boundary10.1016/0009-2509(70)85053-9 ↗
53. Carbon dioxide capture with dolomite: a model for gas–solid reaction within the grains of a particulate sorbent10.1016/j.ces.2009.02.009 ↗
54. Effect of the product layer on the kinetics of the CO2‐lime reaction10.1002/aic.690290111 ↗
55. Parametric investigation of the calcium looping process for CO2 capture in a 10 kWth dual fluidized bed10.1016/j.ijggc.2010.04.009 ↗
56. Nano CaO grain characteristics and growth model under calcination10.1016/j.cej.2011.09.084 ↗
57. Reactivity of highly cycled particles of CaO in a carbonation/calcination loop10.1016/j.cej.2007.05.017 ↗
58. Experimental and computational study of gas–solid fluidized bed hydrodynamics10.1016/j.ces.2005.05.044 ↗
59. CFD simulation of gas–solid bubbling fluidized bed: a new method for adjusting drag law10.1002/cjce.20139 ↗
60. Determination of the critical product layer thickness in the reaction of CaO with CO210.1021/ie050305s ↗
61. Experiment and modeling of CO2 capture from flue gases at high temperature in a fluidized bed reactor with Ca-based sorbents10.1021/ef800474n ↗
62. Rate-equation-based grain model for the carbonation of CaO with CO210.1021/acs.energyfuels.7b02751 ↗
63. Modeling of the carbonation behavior of a calcium based sorbent for CO2 capture10.1016/j.ijggc.2012.07.016 ↗
64. A novel radioactive particle tracking facility for measurement of solids motion in gas fluidized beds10.1002/aic.690310314 ↗