Thermal stability study of sugar alcohol phase change materials by multi-indicators under inert gas protection conditions
Source abstract
Abstract
Phase change materials (PCMs) play an important role in the thermal energy storage technology. Sugar alcohols have attracted widespread attention as medium-temperature PCMs due to their outstanding mid-temperature phase change properties. Thermal stability is a key parameter for the performance of sugar alcohol PCMs. However, the thermal stability evaluation results of sugar alcohol PCMs are inconsistent and incomplete with different single evaluation indicator. Furthermore, sugar alcohols are prone to oxidation in air, which significantly affects their thermal stability. Thus, this paper presents an accurate and quantitative thermal stability evaluation using multi-indicators for three sugar alcohol PCMs in a nitrogen atmosphere. A comprehensive evaluation of their thermal stability was conducted from the aspects of melting enthalpy decay, melting point change, and mass loss. The results showed that melting enthalpy degraded with increasing heating temperatures and durations, and a quantitative evaluation model for three test PCMs was established. A quantitative relationship between the melting point change of sugar alcohols and the melting enthalpy decay was also established. The melting point changes of erythritol, D-mannitol, and inositol were 27 °C, 29 °C, and 23 °C respectively when their melting enthalpy decreased by half. The mass loss of sugar alcohol PCMs was mainly attributed to the release of the gaseous degradation products including H 2, CH 4, CO 2, and H 2O. Among the three indicators, the melting enthalpy decay proved to be the most sensitive evaluation indicator for the thermal stability of sugar alcohols, so the thermal stability results PCMs can be evaluated using melting enthalpy decay in inert gas atmosphere. For example, erythritol exhibited the longest half-life of melting enthalpy among the three test materials, which is 6249 h at a degree of superheat of 5 °C in a nitrogen atmosphere.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities10.1016/j.applthermaleng.2023.122034 ↗
2. Challenges and opportunities of Solar thermal energy towards a sustainable chemical industry10.1016/j.compchemeng.2022.107926 ↗
3. Investigation of thermal energy storage system based on mining by-products for the recovery of Moroccan mining industrial waste heat
4. A state-of-the-art review of the application of phase change materials (PCM) in Mobilized-Thermal Energy Storage (M-TES) for recovering low-temperature industrial waste heat (IWH) for distributed heat supply10.1016/j.renene.2020.12.057 ↗
5. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
6. Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications - a review
7. A review of the composite phase change materials: fabrication, characterization, mathematical modeling and application to performance enhancement10.1016/j.apenergy.2015.12.043 ↗
8. A review of phase change materials for vehicle component thermal buffering10.1016/j.apenergy.2013.08.026 ↗
9. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
10. Effect of adding alumina nanoparticle in D-Mannitol for reversible solar thermoelectric power generation: an experimental study10.1016/j.solmat.2020.110781 ↗
11. Experimental analysis of nucleation triggering in a thermal energy storage based on xylitol used in a portable solar box cooker10.3390/en14185981 ↗
12. Erythritol impregnated within surface-roughened hydrophilic metal foam for medium-temperature solar-thermal energy harvesting10.1016/j.enconman.2020.113241 ↗
13. Polyols as phase change materials for surplus thermal energy storage10.1016/j.apenergy.2015.03.064 ↗
14. Nucleation triggering methods in supercooled phase change materials (PCM), a review10.1016/j.tca.2018.10.009 ↗
15. Thermophysical and heat transfer properties of phase changematerial candidate for waste heat transportation system10.1007/s00231-007-0311-2 ↗
16. Feasibility study of D-mannitol as phase change material for thermal storage10.3934/energy.2017.3.404 ↗
17. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
18. Characterisation and thermophysical properties of graphene nanoparticles dispersed erythritol PCM for medium temperature thermal energy storage applications10.1016/j.tca.2019.03.037 ↗
19. Health hazard, cycling and thermal stability as key parameters when selecting a suitable phase change material (PCM)10.1016/j.tca.2016.01.014 ↗
20. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage. (Ⅲ): thermal endurance10.1016/j.energy.2020.118483 ↗
21. Cycling stability of D-mannitol when used as phase change material for thermal storage applications10.1016/j.tca.2017.12.026 ↗
22. Thermal stability enhancement of d-mannitol for latent heat storage applications10.1016/j.solmat.2019.109913 ↗
23. Stability study of erythritol as phase change material for medium temperature thermal applications10.3390/app11125448 ↗
24. A comprehensive evaluation on the cycling stability of sugar alcohols for medium-temperature latent heat storage10.1016/j.est.2023.107190 ↗
25. Experimental study on solving the blocking for the direct contact mobilized thermal energy storage container10.1016/j.applthermaleng.2014.12.008 ↗
26. Heat capacities of some sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.jct.2017.08.004 ↗
27. Atomistic insights into the effects of hydrogen bonds on the melting process and heat conduction of erythritol as a promising latent heat storage material10.1016/j.ijthermalsci.2019.106103 ↗
28. Role and influence of hydrogen bonds in composite phase change materials:A critical review10.1016/j.solmat.2022.112031 ↗
29. Intramolecular dehydration of mannitol in high-temperature liquid water without acid catalyst10.1039/C4RA09198A ↗
30. Chemical sinks of organic aerosol: kinetics and products of the heterogeneous oxidation of erythritol and levoglucosan10.1021/es101465m ↗
31. Erythritol is a sweet antioxidant10.1016/j.nut.2009.05.004 ↗
32. Heterogeneous oxidation of atmospheric organic aerosol: kinetics of changes to the amount and oxidation state of particle-phase organic carbon10.1021/acs.jpca.5b06946 ↗
33. Estimation of thermal endurance of multicomponent sugar alcohols asphase change materials10.1016/j.applthermaleng.2014.09.032 ↗
34. Perspective on the relationship between melting points and chemical structure10.1021/cg010009s ↗
35. Oxidation chemistry of a pentaerythritol tetraester oil10.1080/10402009908982239 ↗
36. Ott · Influence of salts on the dehydration of several biomass-derived polyols in sub- and supercritical water · 2016 · 38 · 80
37. The solvent-free thermal dehydration of hexitols on zeolites10.1016/S0008-6215(02)00129-5 ↗
38. Intramolecular dehydration of biomass-derived sugar alcohols in high-temperature water10.1039/C6CP06831F ↗
39. Transformation of sorbitol to biofuels by heterogeneous catalysis: chemical and industrial considerations10.2516/ogst/2012073 ↗
40. The solvent-free thermal dehydration of tetritols on zeolites10.1016/S0008-6215(00)00047-1 ↗
41. Oxidation chemistry of a pentaerythritol10.1080/10402009908982239 ↗
42. Stability of D-mannitol upon melting/freezing cycles under controlled inert atmosphere10.1016/j.egypro.2016.06.207 ↗
43. Impact of charged ionic species (NaCl and KCl) on the generation of color and volatile aroma compounds during caramelization
44. Review on the methodology used in thermal stability characterization of phase change materials10.1016/j.rser.2015.04.187 ↗
45. Mobilized thermal energy storage: materials, containers and economic evaluation10.1016/j.enconman.2018.09.070 ↗