journal article·2024-08

Laser damage and post oxidation repair performance of n-TOPCon solar cells with laser assisted doping boron selective emitter

Siwen Gu, Ling Yuan, Kaiyuan Guo, Wei Huang, LvZhou Li, Ya Yang, Xiulin Jiang, Ningyi Yuan, Qinqin Wang, Jianning Ding

Publisher page

Abstract

Boron laser-assisted doped selective emitter (LDSE) is a research hotspot in the mass production of N-type tunnel oxide passivated contact (TOPCon) silicon solar cells. Consequently, it is critical to investigate the damage and repair of laser-assisted doped selective emitter. Through simulation, a surface temperature of silicon rises to over 1414 °C during the laser-assisted doping process, which causes silicon to melt and recrystallize more quickly, and increases the solid solubility of B atoms. Meanwhile, the surface pyramid structure was partially destroyed or even collapsed. The results showed that the peak intensity of (211) crystal planes decreased while the peak intensity of (400), (311), and (220) crystal planes increased. This led to an increase in surface defects and suspension bonds, resulting in an increase in J 0,passivated up to 246.3 fA/cm 2. The laser-induced damage can be successfully repaired by the post-oxidation process, reducing J 0,passivated to 45.07 fA/cm 2. The Quokka simulation indicates that a laser pulse fluence of 2.78 J/cm 2 can increase the efficiency of the LDSE cell by 0.31 %. It does not necessarily lead to the greater efficiency gains with higher laser pulse fluence owing to the increase in surface damage. Exploiting the laser assisted doping method with a minimal surface damage, a wide process window and low cost will be the next major challenge.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Crystalline silicon (c-Si)-based tunnel oxide passivated contact (TOPCon) solar cells: a review10.3390/en16020715 ↗
2. Study on selective emitter fabrication through an innovative pre‐diffusion process for enhanced efficiency in TOPCon solar cells
3. Enhancing industrialization TOPCon solar cell efficiency via comprehensive anti-reflection passivation film optimization10.1016/j.mssp.2023.107874 ↗
4. Jinko Solar - (n.d.). https://www.jinkosolar.com/en/site/newsdetail/2058 (accessed December 22, 2023).
5. Tunnel oxide deposition techniques and their parametric influence on nano-scaled SiOx layer of TOPCon solar cell: a review10.3390/en15155753 ↗
6. Glunz
7. On retrograde phosphorus concentration depth profiles in silicon after POCl3 diffusion and thermal oxidation
8. Solution-doped polysilicon passivating contacts for silicon solar cells10.1021/acsami.0c22127 ↗
9. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
10. Screen-printed n-type Si solar cells with laser-doped selective back surface field10.1016/j.solener.2021.03.062 ↗
11. Printable liquid silicon for local doping of solar cells10.1016/j.solmat.2017.11.003 ↗
12. Kiaee · 2018
13. Novel technique for fabrication of n-type crystalline silicon selective emitter for solar cell processing10.1088/2053-1591/ab18ee ↗
14. Optimization of efficiency enhancement of TOPCon cells with boron selective emitter10.1016/j.solmat.2023.112585 ↗
15. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
16. Segregation and transport coefficients of impurities at the Si/SiO2 interface10.1063/1.338089 ↗
17. Review of laser doping and its applications in silicon solar cells10.1109/JPHOTOV.2023.3244367 ↗
18. K.R. McIntosh, P.P. Altermatt, T.J. Ratcliff, K.C. Fong, L.E. Black, S.C. Baker-Finch, M.D. Abbott, An examination of three common assumptions used to simulation recombination in heavily doped silicon, 28th EU PVSEC (n.d.) 1672–1679. https://doi.org/10.4229/28thEUPVSEC2013-2CV.4.9.
19. Simplified device simulation of silicon solar cells using a lumped parameter optical model10.1109/JPHOTOV.2016.2528407 ↗
20. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
21. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
22. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
23. New analysis of heavily doped boron and arsenic in shallow junctions by X-ray photoelectron spectroscopy
24. Correlation between boron–silicon bonding coordination, oxygen complexes and electrical properties for n-Type c-Si solar cell applications10.3390/en13123057 ↗
25. The chemical states and atomic structure evolution of ultralow-energy high-dose Boron implanted Si(110) via laser annealing
26. Laser activation for highly boron-doped passivated contacts
27. Fabrication of metal–semiconductor nanowire heterojunctions10.1002/anie.200462813 ↗
28. One-step green fabrication of hierarchically porous hollow carbon nanospheres (HCNSs) from raw biomass: formation mechanisms and supercapacitor applications10.1016/j.jcis.2020.07.118 ↗
29. Differences in anisotropic etching properties of KOH and TMAH solutions10.1016/S0924-4247(99)00264-2 ↗
30. The crystal structures of new forms of silicon and germanium10.1107/S0365110X64001840 ↗
31. Crystallization of amorphous silicon via excimer laser annealing and evaluation of its passivation properties10.3390/en13133335 ↗
32. Anisotropy analysis of the surface energy of diamond cubic crystals10.1002/sia.1605 ↗
33. The model of etching of (hkl) planes in monocrystalline silicon10.1149/1.1568940 ↗
34. Werner · 2015
35. Impact of boron doping on electrical performance and efficiency of n-TOPCon solar cell10.1016/j.solener.2021.08.075 ↗
36. Influence of rear surface pyramid base microstructure on industrial n-TOPCon solar cell performances10.1016/j.solener.2022.10.017 ↗