Low-carbon shape-stable phase change composite utilizing semi-coke ash for building thermal energy storage
Source abstract
Abstract
To enhance the efficiency and cost-effectiveness of heating, air-conditioning, and solid waste recycling in buildings, this work proposed the solid waste semi-coke ash as skeleton material and the sodium carbonate as phase-change material to produce shape-stable phase-change composites using the cold compression-hot sintering method for building thermal energy storage. Eight shape-stable phase-change composites were prepared and the detailed chemical compatibility, thermal property, structural and mechanical performance, and micromorphology were investigated by X-ray diffraction, differential scanning calorimetry, laser flash analysis, N 2 adsorption and desorption method, constant speed pressurization method, and scanning electron microscopy. Results demonstrated that semi-coke ash is suitable with sodium carbonate for fabricating shape-stable phase-change composites. The optimal mass ratio of semi-coke ash to Na 2CO 3 powder for sample CC3 was determined to be 52.5:47.5. This particular sample demonstrated a thermal energy storage density of 961.58 J/g and a maximum thermal conductivity of 1.306 W/(m ∙ K). It also exhibited excellent chemical compatibility between its components. Furthermore, sample CC3 displayed a mechanical strength of 23.57 MPa, with elements evenly distributed throughout. Importantly, CO 2 emission from the production of sample CC3 was significantly low, indicating great potential for commercialization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Enhanced thermal storage capacity of paraffin/diatomite composite using oleophobic modification10.1016/j.jclepro.2020.123211 ↗
2. Assessment of mid-to-long term energy saving impacts of nearly zero energy building incentive policies in cold region of China10.1016/j.enbuild.2021.110938 ↗
3. A review of thermal energy storage technologies for seasonal loops10.1016/j.energy.2021.122207 ↗
4. Optimising the regional mix of intermittent and flexible energy technologies10.1016/j.jclepro.2019.02.103 ↗
5. A comprehensive review on sub-zero temperature cold thermal energy storage materials, technologies, and applications: state of the art and recent developments10.1016/j.apenergy.2021.116555 ↗
6. Flexible nanodielectric materials with high permittivity for power energy storage10.1002/adma.201301752 ↗
7. A comparative investigation on the effect of different nanofluids on the thermal performance of two-phase closed thermosyphon10.1016/j.ijheatmasstransfer.2019.119189 ↗
8. Performance analysis and optimal charging time investigation of solar air heater with packed bed sensible heat storage device10.1016/j.solener.2021.06.007 ↗
9. Expanded graphite – paraffin composite phase change materials: effect of particle size on the composite structure and properties10.1016/j.applthermaleng.2020.115015 ↗
10. Emerging phase change materials with improved thermal efficiency for a clean and sustainable environment: an approach towards net zero10.1016/j.rser.2023.113421 ↗
11. Latent thermal energy storage technologies and applications: a review
12. Thermochemical energy storage system for cooling and process heating applications: a review10.1016/j.enconman.2020.113617 ↗
13. Waste polyvinyl chloride derived latent thermal energy storage composites for waste heat recovery via packed bed system10.1016/j.jclepro.2023.137841 ↗
14. Energy storage dvelopment for solar thermal processes
15. MgO based composite phase change materials for thermal energy storage: the effects of MgO particle density and size on microstructural characteristics as well as thermophysical and mechanical properties10.1016/j.apenergy.2019.04.094 ↗
16. Skeleton materials for shape-stabilization of high temperature salts based phase change materials: a critical review10.1016/j.rser.2019.109539 ↗
17. Fabrication and thermal properties investigation of aluminium based composite phase change material for medium and high temperature thermal energy storage10.1016/j.solmat.2020.110511 ↗
18. Preparation and performance improvement of chlorides/MgO ceramics shape-stabilized phase change materials with expanded graphite for thermal energy storage system10.1016/j.apenergy.2022.119116 ↗
19. Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems10.1016/j.est.2020.102155 ↗
20. Preparation and thermal properties of palmitic acid @ZnO/Expanded graphite composite phase change material for heat storage10.1016/j.energy.2021.122972 ↗
21. Effect of composite orders of graphene oxide on thermal properties of Na2HPO4•12H2O/expanded vermiculite composite phase change materials10.1016/j.est.2021.102980 ↗
22. wang · 2018 · 30
23. A new low-cost high-temperature shape-stable phase change material based on coal fly ash and K2CO310.1016/j.solmat.2019.110328 ↗
24. Preparation and thermal properties of phase change energy storage composite material based on modified fly ash10.1016/j.ceramint.2023.08.245 ↗
25. Effect of carbon on the performance of red mud-molten salt composites for thermal management and waste heat recovery applications10.1016/j.est.2021.103363 ↗
26. Valorization of phosphogypsum as a thermal energy storage material for low temperature applications10.1016/j.jclepro.2022.130839 ↗
27. Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications10.1016/j.jhazmat.2021.125407 ↗
28. Effects of CO2 capture on waste concrete/sodium nitrate form-stable phase change composites for energy storage10.1016/j.jclepro.2024.140896 ↗
29. Carbide slag based shape-stable phase change materials for waste recycling and thermal energy storage
30. Sludge-incinerated ash based shape-stable phase change composites for heavy metal fixation and building thermal energy storage10.1016/j.psep.2022.04.004 ↗
31. Investigation on low-carbon shape-stable phase change composite by steel slag and carbide slag for solar thermal energy storage10.1016/j.est.2023.109736 ↗
32. Carbide slag recycling to fabricate shape-stable phase change composites for thermal energy storage10.1016/j.est.2023.106694 ↗
33. Waste semicoke ash utilized to fabricate shape-stable phase change composites for building heating and cooling10.1016/j.conbuildmat.2022.129638 ↗
34. Effects of expanded graphite on NaNO3/semi-coke ash shape-stable phase change composites for thermal energy storage10.1016/j.est.2023.108648 ↗
35. Lauric acid hybridizing fly ash composite for thermal energy storage10.3390/min8040161 ↗
36. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
37. Effects of synthesis methods on thermal performance of nitrate salt nanofluids for concentrating solar power10.1021/acs.energyfuels.0c02466 ↗
38. Study on preparation and thermal properties of sodium nitrate/silica composite as shape-stabilized phase change material10.1016/j.tca.2015.05.023 ↗
39. Preparation and thermal properties of novel eutectic salt/nano-SiO2/expanded graphite composite for thermal energy storage10.1016/j.solmat.2020.110590 ↗
40. Effect of bismuth oxide on the thermal storage performance of carbonate/magnesium oxide composite10.1016/j.solmat.2021.111171 ↗
41. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
42. Preparation and thermal storage performance of phase change ceramsite sand and thermal storage light-weight concrete10.1016/j.renene.2021.05.034 ↗
43. Preparation of graphitic carbon nitride with large specific surface area and outstanding N2 photofixation ability via a dissolve-regrowth process10.1016/j.jpcs.2016.08.008 ↗
44. Nieto · 2010
45. A novel composite phase change material for medium temperature thermal energy storage manufactured with a scalable continuous hot-melt extrusion method10.1016/j.apenergy.2021.117591 ↗
46. Fabrication and characterization of form-stable solar salt/steel slag composite phase change material for thermal energy storage (Chinese)
47. Carbon dioxide emission accounting of alumina production by Bayer process(Chinese)