Design and development of front and back contact solar cells with selective poly-Si passivating contact on the front and local Al contact on the rear
Source abstract
Abstract
We present 22.5% efficient large area (M2), n-type rear junction biPoly™ solar cells featuring selective poly-Si based passivation on the front and full area poly-Si on the rear side. The metal contacts to the selective poly-Si fingers on the front are formed by screen-printing fire-through Ag paste. Two different approaches are compared for the contact formation on the rear side – using fire-through silver-aluminium paste are and non-fire –through Al paste. Prior to the screen-printing the Al paste, laser is used to pattern the local contact openings (LCO) wherein the Al paste alloys with the c-Si substrate during high temperature firing forming contacts. The impact of the LCO pitch, Si content in Al paste and the firing temperature is studied by meticulously designed experiments. We further develop a 3 dimensional model of the biPoly™ solar cells and try to explain the trends observed in the experimental results.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
3. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
4. Passivating and carrier-selective contacts-Basic requirements and implementation
5. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
6. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
7. International technology roadmap for photovoltaics 2022
8. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
9. F. Haase and R. Peibst. "26.1% record efficiency for p-type crystalline Si solar cells." ISFH. https://isfh.de/en/26-1-record-efficiency-for-p-type-crystalline-si-solar-cells/(accessed 23-06, 2018)..
10. E. Bellini. "JinkoSolar achieves 26.1% efficiency for n-type TOPCon solar cell." PV Mag.. https://www.pv-magazine.com/2022/10/13/jinkosolar-achieves-26-1-efficiency-for-n-type-topcon-solar-cell/(accessed 22 Jan, 2023)..
11. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
12. Optoelectrical properties of high-performance low-pressure chemical vapor deposited phosphorus-doped polysilicon layers for passivating contact solar cells10.1016/j.tsf.2020.137886 ↗
13. Development of thin polysilicon layers for application in monoPoly™ cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
14. Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: impact of parasitic absorption10.1109/JPHOTOV.2019.2957642 ↗
15. Silicon solar cell architecture with front selective and rear full area ion‐implanted passivating contacts10.1002/solr.201700040 ↗
16. Design, optimization, and in-depth understanding of front and rear junction double-side passivated contacts solar cells10.1109/JPHOTOV.2021.3086461 ↗
17. Ultra‐thin poly‐Si layers: passivation quality, utilization of charge carriers generated in the poly‐Si and application on screen‐printed double‐side contacted polycrystalline Si on oxide cells10.1002/solr.202000177 ↗
18. Design, development and analysis of large-area industrial silicon solar cells featuring a full area polysilicon based passivating contact on the rear and selective passivating contacts on the front10.1016/j.solmat.2023.112351 ↗
19. Poly-Si/SiOx passivating contacts on both sides: a versatile technology for high efficiency solar cells
20. Large area co‐plated bifacial n‐PERT cells with polysilicon passivating contacts on both sides10.1002/pip.3548 ↗
21. Optimization of P+ Poly-Si/c-Si Junctions on Wet-Chemically Grown Interfacial Oxides and on Different Wafer Morphologies
22. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces
23. On the recombination behavior of p + -type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces
24. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPoly™ solar cells10.1016/j.solener.2020.03.087 ↗
25. Progress with passivation and screen-printed metallization of Boron-doped monoPoly™ layers10.1016/j.solener.2021.11.015 ↗
26. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
27. Influence of silicon substrate surface finish on the screen‐printed silver metallization of polysilicon‐based passivating contacts10.1002/pssa.202100869 ↗
28. Study of screen printed metallization for polysilicon based passivating contacts
29. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
30. Prediction of the open-circuit voltage of solar cells from the steady-state photoconductance10.1002/(SICI)1099-159X(199703/04)5:2<79::AID-PIP155>3.0.CO;2-J ↗
31. Optoelectrical properties of high-performance low-pressure chemical vapor deposited phosphorus-doped polysilicon layers for passivating contact solar cells10.1016/j.tsf.2020.137886 ↗
32. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
33. Quasi-steady-state photoconductance, a new method for solar cell material and device characterization
34. A quasi-steady state open-circuit voltage method for solar cell characterization
35. Measurement of the emitter saturation current by a contactless photoconductivity decay method
36. Specific contact resistance measurements on semiconductors10.1088/0022-3735/22/5/010 ↗
37. Campos · 2011
38. Griddler: intelligent computer aided design of complex solar cell metallization patterns
39. Griddler: intelligent computer aided design of complex solar cell metallization patterns
40. Griddler 2: two dimensional solar cell simulator with facile definition of spatial distribution in cell parameters and bifacial calculation mode
41. Griddler AI: new paradigm in luminescence image analysis using automated finite element methods
42. Griddler AI: new paradigm in luminescence image analysis using automated finite element methods
43. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
44. Impact of firing temperature on fire-through metal contacts to P-doped (n+) and B-doped (p+) poly-Si10.1016/j.solmat.2021.111217 ↗
45. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
46. Lighthouse
47. Opal 2: rapid optical simulation of silicon solar cells
48. Fine line Al printing on narrow point contact opening for front side metallization10.1063/1.5123846 ↗
49. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
50. Contact control of Al/Si interface of Si solar cells by local contact opening method10.1016/j.matchemphys.2021.124833 ↗
51. Fine line Al printing on narrow point contact opening for front side metallization10.1063/1.5123846 ↗
52. Fine line screen-printing aluminum for front side p+ metallization of high efficiency solar cells10.1063/5.0089217 ↗
53. Laser processing and chemistry: recent developments10.1016/S0169-4332(01)00655-9 ↗
54. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗
55. Analysis of laser-induced damage during laser ablation process using picosecond pulse width laser to fabricate highly efficient PERC cells10.1016/j.solener.2014.06.020 ↗
56. Investigation of dielectric layers laser ablation mechanism on n-PERT silicon solar cells for (Ni) plating process: laser impact on surface morphology, composition, electrical properties and metallization quality10.1016/j.solmat.2019.110149 ↗
57. Investigation of depth of laser damage to silicon as function of wavelength and pulse duration10.1016/j.egypro.2013.07.348 ↗
58. Impact of KOH etching on laser damage removal and contact formation for Al local back surface field silicon wafer solar cells
59. The electrical conductivity of cast Al− Si alloys in the range 2 to 12.6 wt pct silicon10.1007/BF02653917 ↗
60. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
61. Analysis and optimization of the bulk and rear recombination of screen-printed PERC solar cells10.1016/j.egypro.2012.07.035 ↗
62. The Al-Si (Aluminum-Silicon) system10.1007/BF02868729 ↗
63. Aluminum alloying in local contact areas on dielectrically passivated rear surfaces of silicon solar cells10.1109/LED.2011.2143385 ↗
64. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept-A review10.1109/JPHOTOV.2016.2571627 ↗
65. PERC+: industrial PERC solar cells with rear Al grid enabling bifaciality and reduced Al paste consumption10.1002/pip.2712 ↗
66. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
67. Interactions between aluminium and fired passivating contacts during fire-through metallization10.1016/j.solmat.2022.112051 ↗
68. Evaluation of series resistance losses in screen-printed solar cells with local rear contacts10.1109/JPHOTOV.2011.2163925 ↗
69. Al–Si alloy formation in narrow p-type Si contact areas for rear passivated solar cells10.1063/1.3437070 ↗
70. Evaluation of determination methods of the Si/Al contact resistance of screen-printed passivated emitter and rear solar cells10.1063/1.4867188 ↗
71. Rear junction bifacial screen-printed double side passivated contact Si solar cells