Optimization of bifacial Ge-incorporated Sb2Se3 thin-film solar cells by modeling Cu2O back buffer layer
Source abstract
Abstract
We have investigated bifacial Ge-incorporated Sb 2Se 3 thin-film solar cells by modeling and simulating a back buffer layer including Cu 2O to optimize the bifacial device performance. A Ge-incorporated Sb 2Se 3 absorber layer was grown using Vapor Transport Deposition to extract the input parameters for the simulation, followed by exploring the properties of the transparent back buffer layer. After selecting a Cu 2O back buffer layer, we conducted the optimization study of bifacial Ge-doped Sb 2Se 3 devices by varying a set of devices and materials parameters. The optical bandgap is characterized as 1.23 eV for Ge-incorporated Sb 2Se 3 absorber and the absorption coefficient is 3 × 10 5 cm −1 at 600 nm. Using these input parameters, we simulated the device configuration of ZnO:Al/i-ZnO/CdS/Ge-Sb 2Se 3 /back buffer layer/transparent conductive oxide. Firstly, we checked the impact of conduction and valence band offsets on device performance, indicating the valence band offset of the back buffer layer plays a significant role. In particular, zero or small positive valence band offset minimizes a Schottky hole barrier, which could reduce hole current clamping near the back buffer region. As for back buffer doping concentration, high back buffer doping concentration (1 × 10 15 cm −3 or higher) is required to improve device performance even with zero valence band offset, whereas low absorber doping concentration ( <1 × 10 14 cm −3) enables higher efficiency due to the enlarged energy band bending. For bifacial device performance, a Cu 2O back buffer layer is simulated by varying critical input parameters such as absorber thickness, doping concentration, and defect concentration near the back buffer interface. The best efficiency of front-side illumination is 19.7%, Voc (744.4 mV), Jsc (40.14 mA/cm 2), and FF (66.1%) and that of the rear-side illumination is 13.0%, Voc (724.5 mV), Jsc (31.6 mA/cm 2), and FF (56.7%). Consequently, the bifaciality factor is 66%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. 5.91 %-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
2. A review of Sb2Se3 photvoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
3. Stable 6%-efficient Sb2Se3 solar cells with a Zno buffer layer10.1038/nenergy.2017.46 ↗
4. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
5. Thin-film Sb2Se3 phtovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
6. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
7. Theoretical Study of the Improved bi-layer absorber of Silver incorporated Sb2Se3 devices
8. Modeling of Ag incorporated Sb(SxSe1−x) bi-layer devices: enhanced bi-layer absorber configuration10.1016/j.solener.2022.04.011 ↗
9. Institute of rare earths elements and strategic metals. URL https://en.institut-seltene-erden.de.
10. Two local built-in potentials of H2S processed CZTSSe by complex impedance spectroscopy10.1016/j.solener.2021.06.064 ↗
11. Evaluation of hetero and back contact junctions of CZTSe: Ge bilayers solar cells with modulus spectroscopy
12. Status of materials and device modelling for kesterite solar cells
13. Estimation of front and back junctions of CZTSe:Ge solar cells by combined modulus and impedance spectroscopy10.1088/1361-6463/ac03e9 ↗
14. Variation of quantum efficiency in CZTSSe solar cells with temperature and bias dependency by SCAPS simulation
15. Improved quantum efficiency models of CZTSe: nanolayer Ge solar cells with linear electric field10.1039/C7NR08824H ↗
16. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
17. 9.2 %-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
18. Importance of fine control of Se flux for improving performances of Sb2Se3 solar cells prepared by vapor transport deposition10.1002/solr.202100327 ↗
19. Achieving high-performance PbS quantum dot solar cells by improving hole extraction through Ag doping10.1016/j.nanoen.2018.01.047 ↗
20. Vapor transport deposition of antimony selenide thin film solar cells with 7.6 % efficiency10.1038/s41467-018-04634-6 ↗
21. Magnetron sputtering deposition and selenization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1016/j.surfcoat.2018.12.102 ↗
22. Efficiency improvement of Sb2Se3 solar cells via grain boundary inversion10.1021/acsenergylett.8b01456 ↗
23. 6.5 % Certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
24. Solution-phase deposition and nanopatterning of GeSbSe phase-change materials10.1038/nmat1887 ↗
25. Optical properties of phase-change optical disks with SbxSe100−x films10.1016/S0042-207X(00)00211-6 ↗
26. Crystallization kinetics of SbxSe100−x thin films10.1016/0040-6090(95)08205-0 ↗
27. New phase change material for optical recording with short erase time10.1063/1.97031 ↗
28. Switching phenomenon in amorphous Sb2Se310.1016/0042-207X(93)90005-U ↗
29. Broken chemical order in Ge-Sb-Se glasses for use as infrared-transmitting lenses10.1016/j.jnoncrysol.2016.10.036 ↗
30. Lee · 2018
31. Structure, nonlinear properties, and photosensitivity of (GeSe2)100−x(Sb2Se3)x glasses10.1364/OME.4.000525 ↗
32. Bifacial solar photovoltaics - a technology review10.1016/j.rser.2016.03.041 ↗
33. Beyond light-trapping benefits: the effect of SiO2 nanoparticles in bifacial semitransparent ultrathin Cu(in,Ga)Se2 solar cells10.1002/solr.202200695 ↗
34. Enabling bifacial thin film devices by developing a back surface field using CuAlOy10.1016/j.nanoen.2021.105827 ↗
35. Novel symmetrical bifacial flexible CZTSSe thin film solar cells for indoor photovoltaic applications10.1038/s41467-021-23343-1 ↗
36. Characteristics of in-substituted CZTS thin film and bifacial solar cell10.1021/am505980n ↗
37. Superstrate-type flexible and bifacial Cu(In,Ga)Se2 thin-film solar cells with In2o3:SnO2 back contact10.1016/j.solener.2020.10.019 ↗
38. Device design for high-performance bifacial Cu(In,Ga)Se2 solar cells under front and rear illuminations10.1016/j.solener.2021.01.075 ↗
39. Semitransparent CdTe solar cells with CdCl2 treated absorber towards the enhanced photovoltaic conversion efficiency10.1016/j.solener.2020.11.049 ↗
40. Effect of sodium-doping on the performance of CZTS absorb layer: single and bifacial sodium-incorporation method10.1016/j.solener.2021.04.063 ↗
41. Raman spectroscopy and in situ XRD probing of the thermal decomposition of Sb2Se3 thin films10.1021/acs.jpcc.1c05047 ↗
42. Thermal evaporation and characterization of sb2se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
43. Index of refraction, dispersion, bandgap and light scattering in GeSe and GeSbSe glasses10.1016/S0022-3093(87)80023-6 ↗
44. Dielectric properties of GeSbSe glasses prepared by the conventional melt-quenching method10.1016/j.rinp.2019.102856 ↗
45. Influence of compositional variation on the optical and morphological properties of Ge-Sb-Se films for optoelectric application10.1016/j.infrared.2018.08.008 ↗
46. Interband tunneling in heterostructure tunnel diodes10.1109/16.75152 ↗
47. Engineering of effective back-contact barrier of CZTSe: nanoscale Ge solar cells – MoSe2 defects implication10.1016/j.solener.2019.10.042 ↗
48. Optical and morphological properties of ge-incorporated polycrystalline Sb2Se3 thin-film for photovoltaic applications
49. Improved device models of CZTSe: nanolayer Ge solar cells with quantum efficiency
50. Impedance spectroscopy models of CZTSe nanolayer Ge bi-layers devices, Proceedings of 37th European Photovoltaic Solar
51. Interfacial engineering of Cu2O passivating contact for efficient crystalline silicon solar cells with an Al2O3 passivation layer10.1021/acsami.1c08258 ↗
52. Energy-band barrier to improve open-circuit voltage of CdTe solar cells10.1016/j.solmat.2013.10.015 ↗