journal article·2022-09

Al-Si contact formation involving back surface field and voids of PERC

Guoguang Xing, Wei Chen, Hanbo Tang, Xingqian Chen, Bowen Feng, Haozhen Li, Zongheng Sun, Yan Wang, Xiaolong Du, Yaoping Liu

Publisher page

Abstract

Local Al–Si contacts are a vital part of passivated emitter and rear cell (PERC) solar cells. They are generally fabricated using laser ablation to open the passivation dielectric layers , which is followed by Al paste printing and high-temperature alloying. However, the alloying process of Al–Si contacts and the formation mechanism of voids remain unclear in parts. In this study, based on the Al–Si binary phase diagram, we revealed the formation path associated with the back surface field (BSF) of the Al–Si alloying process and elucidated the formation mechanism of voids for dashed shape local contact openings. Also, a calculation model is proposed to determine and verify the Si concentration at the peak temperature. During peak-temperature firing, an equilibrium is established between the dissolution and diffusion of Si; subsequently, Si in the melt reaches its saturation concentration and laterally diffuses into the Al layer, thereby causing the net outflow of Si with the contact trench expansion and forming partial voids. During cooling, supersaturated Si precipitates to form BSF, while the degree of precipitated Si limits the thickness and forms the hypereutectic alloy. After the BSF formation, the melt was redistributed along the contact trench, resulting in partial voids turning into complete voids and fully filled contacts. This study also provides a new approach for regulating and optimizing Al–Si contacts.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept-A review10.1109/JPHOTOV.2016.2571627 ↗
2. The role of laser ablated backside contact pattern in efficiency improvement of mono crystalline silicon PERC solar cells10.1016/j.solener.2019.12.044 ↗
3. The Al-Si (Aluminum-Silicon) system10.1007/BF02868729 ↗
4. Diffusion-based model of local Al back surface field formation for industrial passivated emitter and rear cell solar cells
5. Investigation of Al back contacts and BSF formation by in situ TEM for silicon solar cells10.1002/pip.2322 ↗
6. Contact formation and recombination at screen-printed local aluminum-alloyed silicon solar cell base contacts10.1109/TED.2011.2161089 ↗
7. Surface recombination velocity of local Al-contacts of PERC solar cells determined from LBIC measurements and 2D simulation10.1016/j.egypro.2016.07.033 ↗
8. Analysis of contact recombination at rear local back surface field via boron laser doping and screen-printed aluminum metallization on p-type PERC solar cells10.1016/j.egypro.2017.09.256 ↗
9. Evolution of PERC from Al-BSF: optimization based on root cause analysis10.1007/s00339-020-03747-4 ↗
10. Impact of local back-surface-field thickness on open-circuit voltage in PERC solar cells: an experimental study applying ANOVA to determine critical sample size necessary to differentiate mean LBSF values with statistical significance10.1109/JPHOTOV.2020.3026978 ↗
11. Analysis of local aluminum rear contacts of bifacial PERC+ solar cells10.1109/JPHOTOV.2016.2551465 ↗
12. Silicon diffusion in aluminum for rear passivated solar cells, Appl
13. Al-alloyed local contacts for industrial PERC cells by local printing, 2014 IEEE 40th Photovolt
14. Characterisation of rear local contacts including bsf formation using raman and scanning acoustic microscopy, 27th
15. Effect of gravity on the microstructure of Al-Si alloy for rear-passivated solar cells10.1063/1.3633510 ↗
16. Understanding and avoiding the formation of voids for rear passivated silicon solar cells, 3rd Work
17. Microstructure of void formation stages at local rear contacts10.1016/j.egypro.2015.07.100 ↗
18. Modeling the formation of local highly aluminum-doped silicon regions by rapid thermal annealing of screen-printed aluminum10.1002/pssr.201105611 ↗
19. Mechanism of metallization-induced losses in the rear-side of fully screen-printed p-type PERC solar cells10.1109/JPHOTOV.2019.2962337 ↗
20. Preventing The formation of voids in the rear local contact areas for industrial-type PERC solar cells, 28th
21. Void formation in screen-printed local aluminum contacts modeled by surface energy minimization10.1016/j.solmat.2016.06.039 ↗
22. Improved rear local contact formation using al paste containing Si for industrial PERC solar cell10.1109/JPHOTOV.2017.2767604 ↗
23. Nondestructive characterization of voids in rear local contacts of PERC-Type solar cells10.1109/JPHOTOV.2014.2359745 ↗
24. void formation on PERC solar cells and their impact on the electrical cell parameters verified by luminescence and scanning acoustic microscope measurements10.1016/j.egypro.2015.12.294 ↗
25. Quantification of void defects on PERC solar cell rear contacts10.1016/j.egypro.2016.07.007 ↗
26. Aluminum alloying in local contact areas on dielectrically passivated rear surfaces of silicon solar cells10.1109/LED.2011.2143385 ↗
27. Effect of Si content in A1 paste on local A1 rear contacts in PERC cell, 2017
28. Optimization of controllable factors in the aluminum silicon eutectic paste and rear silicon nitride mono-passivation layer of PERC solar cells10.1007/s12540-018-0032-8 ↗
29. Investigation on industrial screen-printed aluminum point contact and its application in n-PERT rear junction solar cells10.1109/JPHOTOV.2019.2940142 ↗
30. Si paste technology for high-efficiency solar cells10.1016/j.solener.2016.05.041 ↗
31. Rear contact and BSF formation for local Al-BSF solar cells10.1016/j.egypro.2012.07.110 ↗
32. Distribution of silicon in the aluminum matrix for rear passivated solar cells10.1016/j.egypro.2011.06.145 ↗
33. The influence of contact geometry and sub-contact passivation on the performance of screen-printed Al2O3 passivated solar cells
34. Optimization of local contact formation on screen-printed Al2O3 passivated solar cells, 2015
35. Process optimization of localized BSF formation for solar cells with over 20% energy conversion efficiency, 2014
36. Horbelt · 2014 · 427
37. Influence of al particle size and firing profile on void formation in rear local contacts of silicon solar cells10.1109/JPHOTOV.2015.2491610 ↗
38. Modified laser-fired contact process for efficient PERC solar cells10.1002/pip.3187 ↗
39. Optimization of Al fire-through contacts for AlOX-SiNXRear passivated bifacial p-PERC10.1109/JPHOTOV.2020.2983006 ↗
40. Alexander Fülle2, Stefan Steckemetz2, Torsten Weber2, Martin Kutzer2, Matthias Müller2, Gerd Fischer2, PERC+: industrial PERC solar cells with rear Al grid enabling bifaciality and reduced Al paste consumption10.1002/pip.2712 ↗
41. Influences of aluminum rear contact and back surface field formation for PERC solar cells, 2018 IEEE 7th World conf. Photovolt. Energy conversion, WCPEC 2018 - a Jt
42. Diffusion of zinc in alpha brass
43. Insight into interfaces and junction of polycrystalline silicon solar cells by kelvin probe force microscopy10.1016/j.nanoen.2017.04.045 ↗
44. Insight into Al-Si interface of PERC by Kelvin probe force microscopy10.1142/S1793604719500784 ↗
45. Study of aluminum fusion into silicon10.1149/1.2425377 ↗
46. Aluminum-silicon interdiffusion in screen printed metal contacts for silicon based solar cells applications10.1016/j.egypro.2013.11.094 ↗