journal article·2022-01

Design, realization and loss analysis of efficient low-cost large-area bifacial interdigitated-back-contact solar cells with front floating emitter

Jikui Ma, Yuhang Song, Shuang Qiao, Dawei Liu, Zhenjun Ding, Radovan Kopecek, Jianhui Chen, Chunfu Zhang, Mingjing Chen

Publisher page

Abstract

Abstract Large-area (251.96 cm2) bifacial interdigitated-back-contact (IBC) solar cells are presented in this work. We employ front floating emitter (FFE) to replace the front surface field (FSF) to simplify the process sequences. A simplified process flow is exploited to fabricate the IBC solar cells through industrial equipment and compatible processes. Double side boron diffusion followed by etch-back to form the emitter and lightly doped front surface, reducing high-temperature influence on the bulk lifetime and fabrication complexity. Ion implantation and anneal process is applied for base doping. The cell conversion efficiency reaches 22.92%, independently certificated by Fraunhofer Institute for Solar Energy System CalLab (Fraunhofer ISE). The IBC solar cells feature an open metallization grid, which offers a bifacial response with the bifaciality reaches to 72%. Only one-step mask and opening procedure was used, which greatly simplified the process. These results demonstrate the feasibility of this simplified process for manufacturing low-cost high-efficiency of IBC cells. Key parameters such as surface recombination J0, metal contact recombination J0-metal, contact resistivity of the cells are extracted by specially designed structures. Loss analysis shows that further efficiency improvement can be attained though reducing the contact resistance and metal contact recombination. The results in this work indicates the potential of this novel process for producing low-cost high-efficient IBC solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Buried emitter solar cell structures: decoupling of metallisation geometry and carrier collection geometry of back contacted solar cells10.1002/pssr.200802113 ↗
2. Numerical simulations of buried emitter back-junction solar cells10.1002/pip.887 ↗
3. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
4. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
5. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
6. Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities10.7567/JJAP.56.08MB15 ↗
7. Optimization of tunnel junction IBC solar cells based on a series resistance model10.1016/j.solmat.2019.110036 ↗
8. Solar cell efficiency tables (version 50)10.1002/pip.2909 ↗
9. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
10. 26.1%-efficient POLO-IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
11. The role of front-surface charges in interdigitated back contact silicon heterojunction solar cells10.1016/j.nanoen.2019.04.001 ↗
12. Silicon solar cells with total area efficiency above 25
13. High-efficiency interdigitated back contact silicon solar cells with front floating emitter10.1002/pssa.201900445 ↗
14. FFE IBC cells: impact of busbars on cell performance with circuit modelling10.1016/j.egypro.2015.07.005 ↗
15. Back-contacted back-junction Si solar cells with locally overcompensated diffusion regions - comparison of buried emitter and floating base design10.1002/pssa.201800791 ↗
16. Analysis of n-type IBC solar cells with diffused boron emitter locally blocked by implanted phosphorus10.1016/j.solmat.2015.05.046 ↗
17. Enhanced current collection in back-contacted back-junction Si solar cells by overcompensating a boron emitter with a phosphorus base-type doping10.1002/pssa.200925509 ↗
18. Improved diffusion profiles in back-contacted back-junction Si solar cells with an overcompensated boron-doped emitter10.1002/pssa.201127199 ↗
19. Back-contacted back-junction n-type silicon solar cells featuring an insulating thin film for decoupling charge carrier collection and metallization geometry10.1002/pip.2204 ↗
20. Mewe · 2015 · 1
21. Investigation of electrical shading effects in back-contacted back-junction silicon solar cells using the two-dimensional charge collection probability and the reciprocity theorem10.1063/1.3524506 ↗
22. Ion implantation for all-alumina IBC solar cells with floating emitter10.1016/j.egypro.2014.08.078 ↗
23. Towards large-scale deployment of bifacial photovoltaics10.1038/s41560-018-0178-0 ↗
24. Quantification of pn-junction recombination in interdigitated back-contact crystalline silicon solar cells10.1109/JPHOTOV.2017.2714134 ↗
25. Optimization of front diffusion profile in bifacial interdigitated back contact solar cell10.1109/JPHOTOV.2020.3021669 ↗
26. Efficient low-cost IBC solar cells with a front floating emitter: structure optimization and passivation layer study10.3390/en11040939 ↗
27. Mercury: a back junction back contact front floating emitter cell with novel design for high efficiency and simplified processing10.1016/j.egypro.2014.08.037 ↗
28. Simplified process for high efficiency, self-aligned IBC c-Si solar cells combining ion implantation and epitaxial growth: design and fabrication10.1016/j.solmat.2016.05.021 ↗
29. Enhanced lateral current transport via the front N+ diffused layer of n-type high-efficiency back-junction back-contact silicon solar cells10.1002/pip.862 ↗
30. Designing IBC cells with FFE: long range effects with circuit simulation
31. Back-junction back-contact n-type silicon solar cell with diffused boron emitter locally blocked by implanted phosphorus10.1063/1.4895538 ↗
32. Measurement of the emitter saturation current by a contactless photoconductivity decay method
33. On the determination of the emitter saturation current density from lifetime measurements of silicon devices10.1002/pip.2167 ↗
34. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
35. Design principles of silicon heterojunction solar cells with dopant-free interdigitated back contacts10.1002/solr.201900230 ↗
36. A quasi-steady-state open-circuit voltage method for solar cell characterization
37. Solar cell contact resistance-A review10.1109/T-ED.1984.21583 ↗
38. Schroder · 1990
39. Surface recombination parameters of interdigitated-back-contact silicon solar cells obtained by modeling luminescence images10.1016/j.solmat.2013.05.050 ↗
40. High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts10.1016/j.solmat.2018.06.019 ↗
41. Simple processing of back-contacted silicon heterojunction solar cells using selective-area crystalline growth10.1038/nenergy.2017.62 ↗
42. Recombination behavior of photolithography-free back junction back contact solar cells with carrier-selective polysilicon on oxide junctions for both polarities10.1016/j.egypro.2016.07.121 ↗
43. A novel silicon heterojunction IBC process flow using partial etching of doped a-Si:H to switch from hole contact to electron contact in situ with efficiencies close to 2310.1002/pip.3101 ↗
44. Simple emitter patterning of silicon heterojunction interdigitated back-contact solar cells using damage-free laser ablation10.1016/j.solmat.2018.06.027 ↗
45. Development of large-area bifacial interdigitated-back-contact (IBC) solar cell with industrial production environment
46. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
47. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗