High-temperature solar-selective coatings based on Cr(Al)N. Part 2: Design, spectral properties and thermal stability of multilayer stacks
Source abstract
Abstract
Two multilayer solar selective absorber coatings [Al/CrN0.95/Cr0.96Al0.04N1.08/Cr0.53Al0.47N1.12/Al2O3 (stack #1) and Cr0.96Al0.04N0.89/Cr0.62Al0.38N1.00/Cr0.53Al0.47N1.12/Al2O3 (stack #2)] were deposited on 316L steel by combining direct current (DC) and high power impulse magnetron sputtering (HiPIMS) technologies with the aim of increasing the working limit temperature. The composition and thickness of the constituent layers were optimized using CODE software to achieve a high solar absorptance (α) and low values of thermal emittance (ε) in the infrared region. The deposited multilayered stacks were heated during 2 h in air at 600, 700 and 800 ◦C to study their thermal stability and optical performance. Compositional, structural and optical characterization of the stacks (as-prepared and after thermal treatment) was performed. Both stacks presented a good solar selectivity with α > 95% and ε < 15%, were stable up to 600 ◦C and fulfilled the performance criterion PC < 5% after 600 and 700 ◦C treatments. Despite the stacks suffered chemical transformations above 600 ◦C, partial oxidation (stack #1) and Cr2N formation (stack #1 and #2), the optical properties were optimum up to 700 ◦C for stack #1 (α = 94%, ε(25 ◦C) = 12%) and 600 ◦C for stack #2 (α = 93%, ε(25 ◦C) = 13%). The solar-to-mechanical energy conversion efficiencies (η) of the as-deposited and annealed (600 and 700 ◦C) samples were up to 20% points higher than the absorber paint commercially used (Pyromark). At 800 ◦C, they underwent a further structural transformation, provoked by the oxidation of the inner layers, and they consequently lost their solar selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Coatings for concentrating solar systems-A review10.1016/j.rser.2015.01.015 ↗
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
4. Influence of application parameters on stability of Pyromark® 2500 receiver coatings Cite as10.1063/1.5117514 ↗
5. Optical properties of (oxy) nitride materials: a review10.1111/jace.12197 ↗
6. T.C. Rojas, A. Caro, G. Lozano, J.C. Sánchez-López, High- temperature solar-selective coatings based on Cr(Al)N. Part 1: microstructure and optical properties of CrNy and Cr1-xAlxNy films prepared by DC/HiPIMS, Sol. Energy Mater. Sol. Cells (submitted for publication).
7. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
8. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
9. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
10. Functional multi-layer nitride coatings for high temperature solar selective application10.1016/j.solmat.2013.10.024 ↗
11. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 1: advanced microstructural and optical simulation10.1016/j.solmat.2017.10.015 ↗
12. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 2: experimental validation and durability tests at high temperature10.1016/j.solmat.2018.04.027 ↗
13. High-temperature air-stable solar selective coating based on MoSi2-Si3N4 composite10.1016/j.solmat.2017.08.021 ↗
14. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
15. The effect of increasing Si content in the absorber layers (CrAlSiNx/CrAlSiOyNx) of solar selective absorbers upon their selectivity and thermal stability10.1016/j.apsusc.2019.03.208 ↗
16. Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region10.1016/j.apsusc.2019.143651 ↗
17. High performance aperiodic metal-dielectric multilayer stacks for solar energy thermal conversion10.1016/j.solmat.2018.12.006 ↗
18. Solar selective performance of metal nitride/oxynitride based magnetron sputtered thin film coatings: a comprehensive review
19. Discharge physics of high power impulse magnetron sputtering10.1016/j.surfcoat.2011.03.081 ↗
20. An introduction to thin film processing using high-power impulse magnetron sputtering10.1557/jmr.2012.8 ↗
21. Duffie · 2005
22. Standard · 2011
23. 2008
24. Transparent conductive tantalum doped tin oxide as selectively solar-transmitting coating for high temperature solar thermal applications10.1016/j.solmat.2019.03.012 ↗
25. Durability of solar energy materials10.1016/S0960-1481(01)00046-5 ↗
26. CODE Software for Optical Spectroscopy. WTheiss Hardware and Software https://www.wtheiss.com/(Accessed: 15 September 2020).
27. High-temperature oxidation of CrAlYN coating: implications of the presence of Y and type of steel10.1016/j.surfcoat.2018.09.020 ↗
28. Mechanical behaviour and oxidation resistance of Cr(Al)N coatings10.1116/1.1946711 ↗
29. Optical simulation, corrosion behavior and long term thermal stability of TiC-based spectrally selective solar absorbers10.1016/j.solmat.2017.04.015 ↗
30. An explanation of hillock growth in thin Al films10.1080/02670844.2016.1165462 ↗
31. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
32. Solar selective coatings for concentrating solar power central receivers
33. TiAlN/TiAlON/Si3N4 tandem absorber prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
34. Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings10.1557/JMR.2004.0444 ↗
35. Tribological behaviour at high temperature of hard CrAlN coatings doped with Y or Zr10.1016/j.tsf.2013.10.041 ↗
36. Influence of Al and Y content on the oxidation resistance of CrAlYN protective coatings for high temperature applications: new insights about the Y role10.1016/j.jallcom.2018.09.280 ↗
37. Tailoring CrNx Stoichiometry and Functionality by Means of Reactive HiPIMS10.1016/j.surfcoat.2020.126235 ↗
38. Unprecedented thermal stability of inherently metastable titanium aluminum nitride by point defect engineering10.1080/21663831.2016.1233914 ↗