High-efficiency n-TOPCon cells ensured by an emitter preparation process without post-oxidation
Source abstract
Abstract
Laser-enhanced contact optimisation (LECO) technology can effectively improve the efficiency of tunnel oxide passivated contact (n-TOPCon) solar cells. Generally, the preparation of an emitter in TOPCon cells requires post-oxidation treatment at temperatures exceeding 1030 °C for over 3000 s. This high-temperature post-oxidation process results in reduced surface doping concentration, increased reflectivity of the front of the cell and elevated manufacturing costs of the junction. In this study, through process research, we reveal that the optimal profile depth of emitter (the boron doping concentration at 1 × 10 18 atoms/cm 3) for mass-produced LECO pastes ranges from 0.44 to 0.52 μm. Additionally, it was discovered that a boron-rich layer (BRL) thinner than 10 nm does not reduce bulk lifetime and increase contact resistivity. Based on these findings, we developed a boron-diffusion method without post-oxidation, which involves controlling the BRL thickness by adjusting the pre-oxidation layer thickness and cycle deposition. When applied to the mass production of n-TOPCon solar cells, this approach resulted in a solar cell conversion efficiency of 26.28 %. This represents an improvement of 0.03 %–0.05 % over traditional boron-diffusion processes. Furthermore, eliminating post-oxidation significantly improved the production capacity and lifespan of the boron-diffusion furnace, thereby reducing the manufacturing costs associated with the solar cells. Furthermore, eliminating post-oxidation significantly improved the production capacity and lifespan of the boron-diffusion furnace, thereby reducing the manufacturing costs associated with the solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
2. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies
3. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
4. Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells10.1016/j.solmat.2022.111713 ↗
5. Boron-rich layer properties formed by boron spin on dopant diffusion in n -type silicon10.1016/j.mssp.2016.09.034 ↗
6. Silicon‐based passivating contacts: the TOPCon route
7. TOPCon – technology options for cost efficient industrial manufacturing
8. Höffler · 2023 · vol. 2826
9. Laser‐enhanced contact optimization on iTOPCon solar cells10.1002/pip.3598 ↗
10. Microscale contact formation by laser enhanced contact optimization10.1109/JPHOTOV.2021.3129362 ↗
11. Interface reactions of B2O3-Si system and boron diffusion into silicon10.1149/1.2403611 ↗
12. K. Kawagishi, M. Susa, T. Maruyama, K. Nagata, Boron diffusion in amorphous silica films, J. Electrochem. Soc. 144 (9): 3270-3275.10.1149/1.1837996 ↗
13. Boron removal for solar-grade silicon production by metallurgical route:A review10.1016/j.solmat.2019.110169 ↗
14. Arsenic glass source diffusion in Si and SiO210.1149/1.2408020 ↗
15. Boron predeposition in silicon using BBr310.1149/1.2131510 ↗
16. Avoidance of boron rich layer formation in the industrial boron spin-on dopant diffused n-type silicon solar cell without additional oxidation process10.1007/s10854-018-0139-1 ↗
17. A one step method to produce boron emitters10.1002/pssa.201701076 ↗
18. Different methods for removing boron-rich layer and their impacts on the efficiency of interdigitated back contact solar cells10.1007/s00339-019-2563-3 ↗
19. Boron-rich layer removal and surface passivation of boron-doped p-n silicon solar cells10.1088/1674-4926/39/12/122004 ↗
20. Boron tube diffusion process parameters for high-efficiency n-TOPCon solar cells with selective boron emitters10.1016/j.solmat.2023.112231 ↗
21. Promotion of boron diffusion and gettering by employing thin Al2O3 layer as a reaction barrier, Journal of materials science10.1007/s10854-020-05124-6 ↗
22. Study of degradation in bulk lifetime of n-type silicon wafer due to oxidation of boron-rich layer10.1016/j.cap.2016.02.001 ↗
23. Effective impurity gettering by phosphorus and boron-diffused polysilicon passivating contacts for silicon solar cells10.1016/j.solmat.2017.11.004 ↗
24. Impact of a boron rich layer on minority carrier lifetime degradation in boron spin-on dopant diffused n-type crystalline silicon solar cells10.1088/0268-1242/31/3/035009 ↗
25. Chemical etching of boron-rich layer and its impact on high efficiency n-type silicon solar cells10.1063/1.4746424 ↗
26. Laser-enhanced contact optimization on iTOPCon solar cells10.1002/pip.3598 ↗