Experimental study on thermal properties and microstructure of carbon nanotube molten salt nanofluids for solar thermal utilization
Source abstract
Abstract
With the continuous increase in energy demand, the exploration and research of new energy sources are becoming increasingly important. Molten salt nanofluids as solar thermal conversion heat transfer and storage media are gradually becoming widespread. To futher enhance the influence of types and concentrations of multi-walled carbon nanotubes (MWCNTS) on the thermal properties of Solar and Hitec salt, short multi-walled carbon nanotubes (S-MWCNTS), MWCNTS, and carboxylated carbon nanotubes (COOH-MWCNTS) with the same size but different types were used as additives to prepare molten salt nanofluids. Specific heat (C p), thermal conductivity, and other parameters were experimentally measured and analyzed. The results demonstrated that the addition of 0.5 wt% S-MWCNTS resulted in the most significant enhancement in C p and thermal conductivity, with an increase of 13.79 % and 78.18 % compared to Solar salt, and an increase of 21.13 % and 130.69 % compared to Hitec salt. Scanning electron microscopy (SEM) observation showed that the molten salt nanofluid containing 0.5 wt% S-MWCNTS and COOH-MWCNTS exhibited a densely stacked network structure, which increased its surface area. Based on these findings, further research was conducted on the thermal properties of S-MWCNTS nanoparticles on Solar and Hitec salt at different concentrations. 0.3 wt% S-MWCNTS resulted in the most significant enhancement in C p, which was 22.07 % higher than Solar salt and 23.95 % higher than Hitec salt; The maximum thermal conductivity improvement of adding 0.6 wt% S-MWCNTS to Solar salt is 101.14 %, and the maximum thermal conductivity improvement of adding 0.5 wt% S-MWCNTS to Hitec salt is 130.69 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Recent advances on nanofluids for low to medium temperature solar collectors: energy, exergy, economic analysis and environmental impact10.1016/j.pecs.2020.100898 ↗
2. Thermodynamic and advanced exergy analysis of a trans-critical CO2 energy storage system integrated with heat supply and solar energy
3. Buildings, Performance investigation and evaluation of a low-temperature solar thermal energy storage system under dynamic weather conditions
4. Azobenzene-containing polymer for solar thermal energy storage and release: advances, challenges, and opportunities
5. High performance Mn/Mg co-modified calcium-based material via EDTA chelating agent for effective solar energy storage10.1016/j.cej.2023.147892 ↗
6. Analysis of distributed concentrating solar power technology and industry development
7. A novel MCFC hybrid power generation process using solar parabolic dish thermal energy10.1016/j.ijhydene.2018.12.014 ↗
8. Research progress on materials for perovskites solar cells
9. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
10. A construction strategy of ferroelectrics by the molten salt method and its application in the energy field10.1039/D0TC01924K ↗
11. Solar thermal energy with molten-salt storage for residential heating application10.1016/j.egypro.2017.03.134 ↗
12. Transient molten salt two-tank thermal storage modeling for CSP performance simulations10.1016/j.solener.2013.02.034 ↗
13. Towards an optimal aiming for molten salt power towers10.1016/j.solener.2017.07.067 ↗
14. Molten salts as engineering fluids–A review: Part I. Molten alkali nitrates10.1016/j.apenergy.2016.09.003 ↗
15. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
16. Bonk · 2021
17. Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature10.1016/j.rser.2017.10.080 ↗
18. Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants10.1016/j.solmat.2020.110768 ↗
19. Mechanism exploration of the enhancement of thermal energy storage in molten salt nanofluid10.1039/D1CP00125F ↗
20. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
21. Influence of the heat transfer fluid in a CSP plant molten salts charging process10.1016/j.renene.2017.05.083 ↗
22. High-temperature corrosion behavior of austenitic stainless steel in quaternary nitrate molten salt nanofluids for concentrated solar power10.1016/j.solmat.2022.111851 ↗
23. Shape effect of Al2O3 nanoparticles on the thermophysical properties and viscosity of molten salt nanofluids for TES application at CSP plants10.1016/j.applthermaleng.2020.114942 ↗
24. Molten chloride salt technology for next-generation CSP plants: compatibility of Fe-based alloys with purified molten MgCl2-KCl-NaCl salt at 700° C10.1016/j.apenergy.2022.119708 ↗
25. One-step synthesis of molten salt nanofluid for thermal energy storage application–a comprehensive analysis on thermophysical property, corrosion behavior, and economic benefit10.1016/j.est.2021.102278 ↗
26. Novel low melting point binary nitrates for thermal energy storage applications10.1016/j.solmat.2017.02.021 ↗
27. Effect of formation of “long range” secondary dendritic nanostructures in molten salt nanofluids on the values of specific heat capacity10.1016/j.ijheatmasstransfer.2015.05.072 ↗
28. Size effect of nanoparticle on specific heat in a ternary nitrate (LiNO3–NaNO3–KNO3) salt eutectic for thermal energy storage10.1016/j.applthermaleng.2016.03.134 ↗
29. Latent and sensible energy storage enhancement of nano-nitrate molten salt10.1016/j.solener.2018.04.012 ↗
30. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
31. Enhanced heat capacity of binary nitrate eutectic salt-silica nanofluid for solar energy storage10.1016/j.solmat.2018.12.019 ↗
32. The effect of nano-MgO on thermal properties of ternary chloride fluid10.1016/j.egypro.2019.01.205 ↗
33. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
34. The effect of nanoparticle morphology on the specific heat of nanosalts10.1016/j.ijheatmasstransfer.2015.11.064 ↗
35. Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles10.1016/j.ijheatmasstransfer.2016.09.004 ↗
36. Anomalous increase in specific heat of binary molten salt-based graphite nanofluids for thermal energy storage10.3390/app8081305 ↗
37. Development of a new method for synthesizing HITEC salt-based alumina nanofluids
38. Optical properties of carboxyl functionalized carbon nanotube aqueous nanofluids as direct solar thermal energy absorbers10.1016/j.solener.2015.07.012 ↗
39. Thermal energy storage characteristics of binary molten salt nanofluids: specific heat and latent heat10.1002/er.6019 ↗
40. Trong Tam · 2020 · vol. 10 · 1199
41. Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: lessons learnt and recommendations for its design, start-up and operation10.1016/j.renene.2018.01.026 ↗
42. Experimental investigation of heat transfer performance of molten HITEC salt flow with alumina nanoparticles10.1016/j.ijheatmasstransfer.2016.11.015 ↗
43. Heat transfer enhancement of nanofluids10.1016/S0142-727X(99)00067-3 ↗