Shunts in crystalline silicon PV modules: A comprehensive review of investigation, characterization, and mitigation
Source abstract
Abstract
Shunts in solar cells significantly affect their performance and reliability, potentially leading to hotspot generation and long-term module failure. Investigating shunts is essential for enhancing solar cell power output and preventing efficiency losses. While extensive research has been conducted on the investigation, characterization, and mitigation of shunts, a consolidated review is necessary to identify optimal techniques and highlight research gaps. This paper provides a comprehensive review of shunts in solar cells, examining their effects on performance and reliability, and exploring various characterization and mitigation strategies. The review categorizes different shunt mechanisms, detailing their origins, characteristics, and impact on performance. It critically evaluates various characterization techniques, classifying them as destructive/non-destructive and spatial/non-spatial, and discusses their advantages and limitations. The paper also highlights advancements in technologies such as luminescence and lock-in thermography, which offer qualitative and quantitative insights into shunts. Additionally, it compares various electrical and thermal models used to study the spatial impact of shunts, assessing their accuracy and suitability. The review further examines reported mitigation techniques, summarizing their effectiveness, targeted applications, and associated challenges. Overall, this paper provides a detailed overview of the progress in detecting, characterizing, modeling, and mitigating shunts, and offers insights into future prospects for improving solar cell efficiency and reliability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. “Solar PV,” Internation Energy Agency (IEA). https://www.iea.org/energy-system/renewables/solar-pv (accessed January. 31, 2024).
2. Effects of different environmental and operational factors on the PV performance: a comprehensive review10.1002/ese3.1043 ↗
3. A review of the degradation of photovoltaic modules for life expectancy10.3390/en14144278 ↗
4. Photovoltaic degradation rates—an analytical review10.1002/pip.1182 ↗
5. Performance and degradation analysis for long term reliability of solar photovoltaic systems: a review10.1016/j.rser.2013.07.046 ↗
6. Review of degradation and failure phenomena in photovoltaic modules10.1016/j.rser.2022.112160 ↗
7. Köntges
8. Shunt types in crystalline silicon solar cells10.1002/pip.544 ↗
9. Influence of shunt resistance on the performance of solar photovoltaic cell
10. Influence of shunt resistance on the performance of an illuminated string of solar cells: theory, simulation, and experimental analysis10.1109/TDMR.2014.2347138 ↗
11. Evaluation of shunt losses in industrial silicon solar cells10.1155/2016/8029608 ↗
12. Luque · 2011
13. Imaging the local forward current density of solar cells by dynamical precision contact thermography
14. Effect of various model parameters on solar photovoltaic cell simulation: a SPICE analysis
15. The effect of Irradiation on different parameters of monocrystalline photovoltaic solar cell
16. Shunt types in multicrystalline solar cells
17. Material-induced shunts in multicrystalline silicon solar cells10.1134/S106378260704015X ↗
18. Lock-in thermography investigation of shunts in screen-printed and PERL solar cells
19. Lock-in thermography for investigating solar cells and materials10.3166/qirt.7.147-165 ↗
20. Shunts due to laser scribing of solar cells evaluated by highly sensitive lock-in thermography10.1016/S0927-0248(00)00077-5 ↗
21. Quantitative evaluation of electroluminescence images of solar cells10.1002/pssr.200903304 ↗
22. Quantitative evaluation of shunts in solar cells by lock-in thermography10.1002/pip.520 ↗
23. Localization of shunts across the floating junction of DSBC solar cells by lock-in thermography
24. On the detection of shunts in silicon solar cells by photo‐ and electroluminescence imaging10.1002/pip.803 ↗
25. The effect of reduced shunt resistance and shading on photovoltaic module performance
26. Potential induced degradation of solar cells and panels
27. Naumann · 2014
28. Investigations on the formation of stacking fault-like PID-shunts10.1016/j.egypro.2016.07.021 ↗
29. Naumann · 2014 · 1
30. Explanation of potential-induced degradation of the shunting type by Na decoration of stacking faults in Si solar cells10.1016/j.solmat.2013.06.015 ↗
31. Sodium decoration of PID-s crystal defects after corona induced degradation of bare silicon solar cells10.1016/j.egypro.2015.07.055 ↗
32. Micro structural root cause analysis of potential induced degradation in c-Si solar cells10.1016/j.egypro.2012.07.020 ↗
33. The role of stacking faults for the formation of shunts during potential-induced degradation of crystalline Si solar cells10.1002/pssr.201307090 ↗
34. Cross-characterization for imaging parasitic resistive losses in thin-film photovoltaic modules10.3390/jimaging2030023 ↗
35. Analysis and insight of electroluminescence imaging in the assessment of potential-induced degradation in crystalline silicon photovoltaic module10.1016/j.engfailanal.2022.106027 ↗
36. Investigating PID shunting in polycrystalline silicon modules via multiscale, multitechnique characterization10.1002/pip.2996 ↗
37. Solar cell parameters extraction based on single and double-diode models: a review10.1016/j.rser.2015.11.051 ↗
38. Effect of local shunting on the electrical mismatch losses in industrial silicon photovoltaic modules10.22606/ijper.2018.21001 ↗
39. Influence of local shunting on the electrical performance in industrial Silicon solar cells10.1016/j.solener.2016.10.020 ↗
40. Electrical simulation and characterization of shunts in solar cells
41. Classification of shunting mechanisms in crystalline silicon solar cells10.1016/S0927-0248(01)00191-X ↗
42. Non-destructive approach for severity investigation of shunts in crystalline silicon photovoltaic modules by combination of electroluminescence imaging and lock-in thermography10.1088/1361-6501/ab0265 ↗
43. High-resolution lock-in thermography investigation on industrial multicrystalline silicon solar cells10.1109/JPHOTOV.2013.2255733 ↗
44. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
45. Low-temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material10.1109/TCAPT.2005.853167 ↗
46. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
47. Finger and interconnect degradations in crystalline silicon photovoltaic modules: a review10.1016/j.solmat.2021.111296 ↗
48. Imaging physical parameters of pre‐breakdown Sites by lock‐in Thermography Techniques10.1002/pip.848 ↗
49. Pre-breakdown mechanisms in multicrystalline silicon solar cells
50. Physical mechanisms of breakdown in multicrystalline silicon solar cells
51. Classification of pre-breakdown phenomena in multicrystalline silicon solar cells
52. Identification of pre-breakdown mechanism of silicon solar cells at low reverse voltages10.1063/1.3480415 ↗
53. Physical mechanisms of breakdown in multicrystalline silicon solar cells
54. Imaging and analysis of pre-breakdown sites in multicrystalline silicon solar cells
55. Avalanche breakdown in multicrystalline solar cells due to preferred phosphorous diffusion at extended defects10.1002/pip.2220 ↗
56. Understanding shunting mechanisms in silicon cells: a review
57. Hot spot risk analysis on silicon cell modules
58. The effect of shading on photovoltaic solar panels10.1007/s12667-016-0225-5 ↗
59. Assessing the reliability and degradation of photovoltaic module performance parameters10.1109/TR.2004.824831 ↗
60. Simulation of I-V characteristics of a PV module with shaded PV cells10.1016/S0927-0248(02)00134-4 ↗
61. A novel electrical approach to protect PV modules under various partial shading situations10.1016/j.solener.2019.10.035 ↗
62. A review of the environmental factors degrading the performance of silicon wafer-based photovoltaic modules: failure detection methods and essential mitigation techniques10.1016/j.rser.2019.04.024 ↗
63. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
64. Inspection and condition monitoring of large-scale photovoltaic power plants: a review of imaging technologies10.1016/j.rser.2022.112353 ↗
65. System voltage potential-induced degradation mechanisms in PV modules and methods for test
66. Evolution of leakage current paths in MC-Si PV modules from leading manufacturers undergoing high-voltage bias testing10.1109/JPHOTOV.2013.2294764 ↗
67. The effect of moisture on the degradation mechanism of multi-crystalline silicon photovoltaic module10.1016/j.microrel.2013.07.047 ↗
68. Analysis of leakage currents in photovoltaic modules under high‐voltage bias10.1002/pip.401 ↗
69. Effect of different factors on the leakage current behavior of silicon photovoltaic modules at high voltage stress10.1109/JPHOTOV.2018.2841500 ↗
70. Leakage current in solar photovoltaic modules
71. Potential induced degradation (PID): review
72. Review of photovoltaic module degradation, field inspection techniques and techno-economic assessment10.1016/j.rser.2022.112616 ↗
73. Review of potential‐induced degradation in bifacial PV modules10.1002/ente.202200943 ↗
74. Potential-induced degradation: recombination behavior, temperature coefficients and mismatch losses in crystalline silicon photovoltaic power plant10.1016/j.solener.2019.06.023 ↗
75. Potential-induced degradation in photovoltaic modules: a critical review10.1039/C6EE02271E ↗
76. Comparison of potential-induced degradation (PID) of n-type and p-type silicon solar cells10.1016/j.energy.2018.07.118 ↗
77. Performance analysis of PID affected crystalline silicon PV module under partial shading condition
78. Application of electroluminescence imaging to distinguish ohmic and non ohmic shunting in inaccessible cells within a PV module10.1109/JPHOTOV.2024.3357210 ↗
79. The influence of sodium ions decorated micro-cracks on the evolution of potential induced degradation in p-type crystalline silicon solar cells10.1016/j.solener.2018.08.082 ↗
80. Sodium accumulation at potential-induced degradation shunted areas in polycrystalline silicon modules10.1109/JPHOTOV.2016.2601950 ↗
81. Potential-induced degradation in solar cells: electronic structure and diffusion mechanism of sodium in stacking faults of silicon10.1063/1.4894007 ↗
82. Experimental investigation of potential induced degradation (PID) impact and recovery on crystalline photovoltaic systems
83. Time-resolved investigation of transient field effect passivation states during potential-induced degradation and recovery of bifacial silicon solar cells10.1002/solr.202100140 ↗
84. Potential-induced degradation (PID): incomplete recovery of shunt resistance and quantum efficiency losses10.1109/JPHOTOV.2015.2459919 ↗
85. Sodium outdiffusion from stacking faults as root cause for the recovery process of potential-induced degradation (PID)10.1016/j.egypro.2014.08.013 ↗
86. Shunt analysis in solar cells - electro-optical classification and high resolution defect diagnostics10.1016/j.egypro.2012.07.021 ↗
87. CELLO: an advanced LBIC measurement technique for solar cell local characterization10.1016/S0927-0248(02)00270-2 ↗
88. CELLO measurement technique for local identification and characterization of various types of solar cell defects
89. Mapping of contact resistance and locating shunts on solar cells using resistance analysis by mapping of potential (RAMP) techniques
90. Determination of internal series resistance of PV devices: repeatability and uncertainty10.1088/0957-0233/27/5/055005 ↗
91. Indoor measurement of photovoltaic device characteristics at varying irradiance, temperature and spectrum for energy rating10.1088/0957-0233/21/11/115701 ↗
92. Local current-voltage curves measured thermally (LIVT): a new technique of characterizing PV cells10.1016/S0927-0248(97)00069-X ↗
93. Quantitative local analysis of IV characteristics of solar cells by thermal methods
94. Imaging techniques for the analysis of silicon wafers and solar cells10.1149/1.2980293 ↗
95. Shunt imaging in solar cells using low cost commercial liquid crystal sheets
96. Localization and imaging of local shunts in solar cells using polymer-dispersed liquid crystals10.1002/pip.378 ↗
97. Quantitative analysis of the influence of shunts in solar cells by means of lock-in thermography
98. Lock-in IR-Thermography - a novel tool for material and device
99. Unsteady-state lock-in thermography–application to shunts in solar cells10.3166/qirt.4.85-105 ↗
100. Breitenstein · 2010