journal article·2024-10

Characterizing glass frits for high efficiency crystalline silicon solar cells by etching experiments

Zhen Guo, Jiahao Liu, Xingyu Zhou, Yinghu Sun, Haiping Yu, Shenghua Ma

Publisher page

Abstract

To enhance the efficiency of Tunnel Oxide Passivated contacts (TOPCon) solar cells, optimizing the electrode material components is essential. Glass frit, as one of the important components of silver-aluminum (Ag–Al) paste, plays a key role in the formation of good ohmic contacts, however, its specific impact on cell performance remains unclear. The effectiveness of glass frit is mainly reflected in its effect on the emitter surface. In this study, we aim to optimize the glass frit used for the frontal sub-grid of industrial n-TOPCon solar cells using inverse analysis based on known cell performance parameters. The overall morphology and internal structure at the Ag–Si interface of intact cells were analyzed by etching experiments. In combination with the composition of the glass frit, to probe the wettability difference between glass frit and c-Si, along with the reactions between the components of the Ag–Al paste after sintering, explaining the main reasons for the difference in the performance of the solar cell. It provides research ideas for characterizing the performance of the glass layer at the Ag–Si interface, which is conducive to the researchers in-depth understanding of the important role of glass frit in the metallization of solar cells, facilitating more targeted optimization of electrode pastes for solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Progress of PV cell technology: feasibility of building materials, cost, performance, and stability10.1016/j.solener.2023.04.066 ↗
2. Screen-printable contacts for industrial N-TOPCon crystalline silicon solar cells10.1109/JPHOTOV.2021.3138248 ↗
3. Silicon‐based passivating contacts: the TOPCon route10.1002/pip.3522 ↗
4. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
5. Crystalline silicon (c-Si)-Based Tunnel Oxide passivated contact (TOPCon) solar cells: a review10.3390/en16020715 ↗
6. 21.16%-efficiency p-type TOPCon solar cell with ALD-Al2O3/MoOx/Ag as a hole-selective passivating contact10.1016/j.solener.2022.10.019 ↗
7. Schmidt · 2018
8. Effect of firing process on electrical properties and efficiency of n-TOPCon solar cells10.1016/j.solener.2023.112205 ↗
9. Mechanical and electrical properties of Ni-Ag metallized TOPCon silicon solar cells structured by green picosecond laser10.1007/s11664-023-10349-2 ↗
10. Front side metallization of silicon solar cells – a high-speed video imaging analysis of the screen printing process10.1016/j.solmat.2020.110721 ↗
11. Screen printing metallization of boron emitters10.1002/pip.933 ↗
12. Screen-printable conductor metallizations for industrial n-TOPCon crystalline silicon solar cells
13. Understanding metal induced recombination losses in silicon solar cells with screen printed silver contacts10.1016/j.egypro.2016.10.077 ↗
14. Effect of Te-based glass on contact formation and electrical properties in Si solar cells10.1016/j.jallcom.2020.154500 ↗
15. Characterization of glass frit in conductive paste for N-type crystalline silicon solar cells10.1109/JPHOTOV.2017.2730866 ↗
16. Silicon solar cells: structural properties of Ag-contacts/Si-substrate
17. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
18. Silver nanoparticles-coated glass frits for silicon solar cells
19. Effect of basicity of glass frits on electrical properties of Si solar cells10.1016/j.solmat.2018.05.015 ↗
20. Interface analysis of Ag/n‐type Si contacts in n‐type PERT solar cells10.1002/pip.3242 ↗
21. Ohimc contact formation mechanism of silver–aluminum paste metallization on the p+ emitter of n-type crystalline silicon solar cells10.1007/s11664-022-09821-2 ↗
22. Investigation of SiO2-B2O3-ZnO-Bi2O3 glass frits on the interface reaction of silver front contacts10.1016/j.jallcom.2020.157646 ↗
23. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
24. High‐temperature contact formation on n‐type silicon: basic reactions and contact model for seed‐layer contacts10.1002/adfm.200901305 ↗
25. Characterization of TeO2 based glass frits and morphology to their silver films10.1007/s10854-017-7789-2 ↗
26. Crystalline nature of metal spikes and silicon inclusions in Ag/Al screen-printing metallization10.1109/JPHOTOV.2015.2493363 ↗
27. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
28. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
29. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
30. Superb improvement of boron doping in selective emitter for TOPCon solar cells via boron-doped silicon paste10.1016/j.solener.2022.10.031 ↗
31. Sintering and contact formation of glass containing silver pastes10.1016/j.egypro.2012.07.104 ↗
32. Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells10.1007/s12540-009-0307-1 ↗
33. Role of the ambient oxygen on the silver thick-film contact formation for crystalline silicon solar cells10.1016/j.cap.2009.11.054 ↗
34. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
35. The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates
36. Basic study on the influence of glass composition and aluminum content on the Ag/Al paste contact formation to boron emitters10.1016/j.egypro.2015.03.284 ↗
37. Rare-earth element doping in glass frit for improved performance in silicon solar cells10.1142/S1793604719500802 ↗
38. Al-induced variation to Ag crystal orientation of Ag–Al pastes during metallization10.1016/j.solmat.2024.112814 ↗
39. Improvement of wettability of Te-modified lead-free glass frit and its effect to front side silver paste in crystalline silicon solar cells10.1016/j.solmat.2023.112214 ↗
40. Structural, thermal and electrical properties of Li2O–Al2O3–GeO2–P2O5 glasses10.1016/j.jallcom.2021.159532 ↗
41. Dielectric and thermal properties of aluminoborosilicate glasses doped with mixed rare-earth oxides10.1016/j.jnoncrysol.2020.120550 ↗
42. A study of interfacial wettability of glass spreading on a silicon substrate10.1007/s11664-022-09683-8 ↗
43. Effect of MoO3/WO3 modulation on high-temperature wettability and crystallization behavior of glass and its application in solar cell10.1016/j.ceramint.2024.01.166 ↗
44. Low recombination firing-through Al paste for N-type solar cell with boron emitter
45. Effects of particle size of aluminum powder in silver/aluminum paste on n-type solar cells10.3934/matersci.2018.4.614 ↗
46. Novel Ag-doped glass frits for high-efficiency crystalline silicon solar cells10.1039/C7CC02838E ↗
47. Initiatively embedding silver colloids in glass used in silver paste to improve metallization ohmic contact on silicon wafers10.1007/s12034-020-02171-x ↗
48. Mechanism of silver/glass interaction in the metallization of crystalline silicon solar cells10.1088/2053-1591/ab6ca2 ↗