journal article·2023-07

Radially graded metal foams arrangement in heat storage device of photothermal utilization systems

Junfei Guo, Pan Wei, Xinyu Huang, Xiaohu Yang, Ya-Ling He, Bengt Sundén

Publisher page

Abstract

Metal foam was adopted for improving inherent low thermal conductivity of traditional thermal energy storage (TES), which conducted higher solar energy conversion efficiency . With consideration of more energy response and the mixing enhancement effect on heat conduction and natural convection, this work investigated a vertical TES tube in solar energy photothermal utilization systems, embedded in metallic foam with radial gradient porosity and pore density. Experiments and simulations have both been carried out. It is thoroughly examined how the liquid fraction, solid-liquid interface, temperature field, and velocity field evolve, and the properties of energy storage, such as heat transfer density and energy storage quantity, are further assessed. Results demonstrated that the melting duration was shortened by 11.2% for the positive radially graded porosity arrangement and prolonged by 16.8% for the negative, in comparison to the homogeneous structure. Meanwhile, influenced by the varied porosity, the temperature uniformity was enhanced by 4.9% for the positive and was deteriorated by 15.1% for the negative. In addition, positive and negative gradient pore density respectively increased the temperature uniformity of by 15.1% and 16.7%. Based above, metal foam tube with negative gradient porosity and pore density was suggested to build the more efficient photothermal solar energy conversion systems due to faster melting process and more homogeneous temperature uniformity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Heat and Mass Transfer in Porous Media · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. The experimental thermal analysis of aluminum metal melting with concentrated solar energy10.1016/j.solmat.2020.110940 ↗
2. Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage10.1016/j.solmat.2022.112027 ↗
3. Lipid-derived cetyltrimethylammonium salts as renewable phase change materials for thermal energy storage10.1016/j.solmat.2022.112102 ↗
4. Melting performance assessments on a triplex-tube thermal energy storage system: optimization based on response surface method with natural convection10.1016/j.renene.2022.02.035 ↗
5. Application and analysis of flip mechanism in the melting process of a triplex-tube latent heat energy storage unit10.1016/j.egyr.2023.03.037 ↗
6. Numerical and Experimental study on the performance of a new two-layered high-temperature packed-bed thermal energy storage system with changed-diameter macro-encapsulation capsule10.1016/j.applthermaleng.2018.07.026 ↗
7. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
8. Numerical studies on a Fin-Foam composite structure towards improving melting phase change10.1016/j.ijheatmasstransfer.2023.124076 ↗
9. A review on sensible heat based packed bed solar thermal energy storage system for low temperature applications10.1016/j.solener.2020.07.027 ↗
10. Melting characteristics of a longitudinally finned-tube horizontal latent heat thermal energy storage system10.1016/j.solener.2021.10.043 ↗
11. Macroscopic and microscopic investigations of low-temperature thermochemical heat storage reactors: a review10.1016/j.rser.2022.112152 ↗
12. Latent heat thermal energy storage systems with solid-liquid phase change materials: a review10.1002/adem.201700753 ↗
13. Nanoparticle surface charge-enhanced heat capacity in molten salt phase change materials for thermal energy storage10.1016/j.solmat.2022.111795 ↗
14. Novel industrial waste-based shape-stabilized composite phase change materials with high heat storage performance from calcium carbide furnace dust10.1016/j.solmat.2022.111745 ↗
15. A comprehensive review on phase change materials for heat storage applications: development, characterization, thermal and chemical stability10.1016/j.solmat.2021.111392 ↗
16. Recent advances in thermophysical properties enhancement of phase change materials for thermal energy storage10.1016/j.solmat.2021.111309 ↗
17. Investigation of convection and radiation heat transfer of paraffinic materials and storage of thermal energy in melting process of PCMs in the cavity with transparent inner walls10.1016/j.egyr.2022.04.025 ↗
18. Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media10.1016/j.apenergy.2017.02.019 ↗
19. Numerical studies on the influence of natural convection under inclination on optimal aluminium proportions and fin spacings in a rectangular aluminium finned latent-heat thermal energy storage10.1016/j.applthermaleng.2020.116448 ↗
20. Numerical investigation of natural convection behavior of molten PCM in an enclosure having rectangular and tree-like branching fins10.1016/j.energy.2020.118223 ↗
21. Experimental investigation and comparative performance analysis of a compact finned-tube heat exchanger uniformly filled with a phase change material for thermal energy storage10.1016/j.enconman.2018.03.041 ↗
22. Compression effect of metal foam on melting phase change in a shell-and-tube unit10.1016/j.applthermaleng.2022.118124 ↗
23. Design and assessments on a hybrid pin fin-metal foam structure towards enhancing melting heat transfer: an experimental study10.1016/j.ijthermalsci.2022.107809 ↗
24. Effect of copper metal foam proportion on heat transfer enhancement in the melting process of phase change materials10.1016/j.applthermaleng.2021.117778 ↗
25. Effects of gradient porous metal foam on the melting performance and energy storage of composite phase change materials subjected to an internal heater: a numerical study and PIV experimental validation10.1016/j.ijheatmasstransfer.2021.122081 ↗
26. Melting and solidification of phase change materials in metal foam filled thermal energy storage tank: evaluation on gradient in pore structure10.1016/j.applthermaleng.2022.118564 ↗
27. Retraction Note to “Melting of nanoparticles-enhanced phase change material (NEPCM) in vertical semicircle enclosure: numerical study”10.1007/s12206-021-0946-9 ↗
28. Heat transfer enhancement of microencapsulated phase change material by addition of nanoparticles for a latent heat thermal energy storage system10.1016/j.egyr.2021.07.080 ↗
29. Free convection heat transfer analysis of a suspension of nano–encapsulated phase change materials (NEPCMs) in an inclined porous cavity10.1016/j.ijthermalsci.2020.106503 ↗
30. Time periodic natural convection heat transfer in a nano-encapsulated phase-change suspension10.1016/j.ijmecsci.2019.105243 ↗
31. Melting heat transfer of power-law non-Newtonian phase change nano-enhanced n-octadecane-mesoporous silica (MPSiO2)10.1016/j.ijheatmasstransfer.2020.119385 ↗
32. Numerical investigation on paraffin/expanded graphite composite phase change material based latent thermal energy storage system with double spiral coil tube10.1016/j.applthermaleng.2018.03.048 ↗
33. Optimising graphite composites and plate heat exchangers for latent thermal energy storage using measurements and simulation10.1016/j.est.2020.101347 ↗
34. Experimental analysis to improve charge/discharge of thermal energy storage in phase change materials using helical coil and porous metal foam10.1016/j.est.2022.105759 ↗
35. Pore-scale convection-conduction heat transfer and fluid flow in open-cell metal foams: a three-dimensional multiple-relaxation time lattice Boltzmann (MRT-LBM) solution10.1016/j.icheatmasstransfer.2021.105465 ↗
36. Improved thermal energy storage with metal foam enhanced phase change materials considering various pore arrangements: a pore-scale parallel lattice Boltzmann solution10.1016/j.est.2022.104744 ↗
37. Conductivity and permeability of graphite foams: analytical modelling and pore-scale simulation10.1016/j.ijthermalsci.2022.107706 ↗
38. Numerical study on latent heat thermal energy storage system with PCM partially filled with aluminum foam in local thermal equilibrium10.1016/j.renene.2022.06.122 ↗
39. Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)10.1016/j.solener.2010.04.022 ↗
40. Numerical study on latent thermal energy storage systems with aluminum foam in local thermal equilibrium10.1016/j.applthermaleng.2019.113980 ↗
41. A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals10.1016/j.energy.2011.07.019 ↗
42. Numerical simulation of flow and heat transfer in composite PCM on the basis of two different models of open-cell metal foam skeletons10.1016/j.ijheatmasstransfer.2017.05.012 ↗
43. Experimental study on enhancement of thermal energy storage with phase-change material10.1016/j.apenergy.2016.02.028 ↗
44. Effect of metal foam on improving solid–liquid phase change in a multi-channel thermal storage tank
45. Hybrid thermal performance enhancement of a circular latent heat storage system by utilizing partially filled copper foam and Cu/GO nano-additives
46. Thermal transport augmentation in latent heat thermal energy storage system by partially filled metal foam: a novel configuration10.1016/j.est.2019.02.019 ↗
47. Numerical investigation and optimal design of partially filled sectorial metal foam configuration in horizontal latent heat storage unit10.1016/j.energy.2021.121640 ↗
48. Experimental and numerical investigations on the effect of porosity and PPI gradients of metal foams on the thermal performance of a composite phase change material heat sink10.1016/j.ijheatmasstransfer.2020.120454 ↗
49. Numerical study on the performance of shell-and-tube thermal energy storage using multiple PCMs and gradient copper foam10.1016/j.renene.2021.04.061 ↗
50. Transient performance of a PCM-based heat sink with a partially filled metal foam: effects of the filling height ratio10.1016/j.applthermaleng.2017.09.047 ↗
51. Melting performance enhancement of phase change material by a limited amount of metal foam: configurational optimization and economic assessment10.1016/j.apenergy.2017.12.082 ↗
52. Numerical analysis on thermal behavior of solid–liquid phase change within copper foam with varying porosity10.1016/j.ijheatmasstransfer.2015.01.088 ↗
53. Numerical analysis on the energy storage efficiency of phase change material embedded in finned metal foam with graded porosity10.1016/j.applthermaleng.2017.05.075 ↗
54. Numerical study on the influence of inclination angle on the melting behaviour of metal foam-PCM latent heat storage units10.1016/j.energy.2021.122489 ↗
55. Nonuniform metal foam design and pore-scale analysis of a tilted composite phase change material system for photovoltaics thermal management10.1016/j.apenergy.2021.117203 ↗
56. Gradient design of pore parameters on the melting process in a thermal energy storage unit filled with open-cell metal foam10.1016/j.apenergy.2020.115019 ↗
57. Three-dimensional numerical study on solid-liquid phase change within open-celled aluminum foam with porosity gradient10.1016/j.applthermaleng.2016.10.173 ↗
58. Experimental study on latent thermal energy storage system with gradient porosity copper foam for mid-temperature solar energy application10.1016/j.apenergy.2019.114472 ↗
59. Visualized-experimental investigation on the energy storage performance of PCM infiltrated in the metal foam with varying pore densities10.1016/j.energy.2021.121540 ↗
60. The validity of the Boussinesq approximation for liquids and gases10.1016/0017-9310(76)90168-X ↗
61. Pore-scale simulation of forced convection heat transfer in metal foams with uniform and gradient structures
62. Effect of metal foam with two-dimensional porosity gradient on melting behavior in a rectangular cavity10.1016/j.renene.2021.03.069 ↗
63. Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material10.1016/j.ijthermalsci.2022.107572 ↗
64. Using triply periodic minimal surfaces (TPMS)-based metal foams structures as skeleton for metal-foam-PCM composites for thermal energy storage and energy management applications10.1016/j.icheatmasstransfer.2021.105265 ↗
65. Numerical investigation on melting behaviour of phase change materials/metal foam composites under hypergravity conditions10.1016/j.applthermaleng.2022.118153 ↗
66. An analytical model for permeability of isotropic porous media10.1016/j.physleta.2014.06.002 ↗
67. Thermophysical properties of high porosity metal foams10.1016/S0017-9310(01)00220-4 ↗
68. Pressure drop modelling in cellular metallic foams10.1016/S0009-2509(02)00166-5 ↗
69. Dispersion in cellular thermal convection in porous layers10.1016/0017-9310(88)90096-8 ↗
70. Heat transfer from tubes in crossflow10.1016/S0065-2717(08)70038-8 ↗
71. Numerical investigation on non-Newtonian melting heat transfer of phase change material composited with nanoparticles and metal foam in an inner heated cubic cavity10.1016/j.est.2022.104417 ↗
72. Local optimization strategy of copper foam on heat transfer enhancement for phase change materials10.1016/j.est.2022.106407 ↗
73. Flow and heat transfer irreversibility in partial filled metal foams
74. Impact of using a PCM-metal foam composite on charging/discharging process of bundled-tube LHTES units10.1016/j.ijheatmasstransfer.2020.119320 ↗
75. Computational modeling of latent heat thermal energy storage in a shell-tube unit: using neural networks and anisotropic metal foam10.3390/math10244774 ↗
76. Direct simulation of interstitial heat transfer coefficient between paraffin and high porosity open-cell metal foam10.1115/1.4038006 ↗
77. Calmidi · 1998
78. Progress of constructal theory in China over the past decade10.1016/j.ijheatmasstransfer.2018.10.064 ↗
79. Thermal analysis of tubular arrangements submitted to external flow using constructal theory10.1016/j.icheatmasstransfer.2019.104458 ↗
80. Synergistic improvement of melting rate and heat storage capacity by a rotation-based method for shell-and-tube latent thermal energy storage10.1016/j.applthermaleng.2022.119480 ↗