journal article·2023-06

Improving loading of CdS/CdSe co-sensitized quantum dots to enhance the performance of solar cells by voltage-assisted SILAR deposition

Bin Bin Jin, Xiao Jun Liu, Li Chun Dong, Xiang Xin Zhong, Ming Yan Liang, Jie Gan, Min Chen, Feng Guo

Publisher page

Abstract

In the conventional successive ionic layer adsorption and reaction (SILAR), the slow growth and uneven distribution of quantum dots (QDs) in TiO 2 mesoporous films limit the loading amount of QDs, decreasing the effectiveness of QDs to improve quantum dot-sensitized solar cells (QDSSCs). Especially in CdS/CdSe co-sensitized solar cells, the growth of CdS QDs on the surface of TiO 2 films blocks the internal voids, making it difficult to load the post-sequence CdSe into the interior of the TiO 2 mesoporous films. Herein, we have developed a simple and rapid voltage-assisted SILAR technique (VASILAR) to load CdS/CdSe QDs into the TiO 2 mesoporous films more efficiently. Comparing with conventional SILAR method, the electric field generated by imposing the voltage could drive the ions to diffuse/penetrate rapidly into the interior of the mesoporous films, promoting the preferential deposition of a large number of CdS in the deep region of the films. A uniform distribution of CdS in TiO 2 mesoporous films is achieved. The uniform distribution of CdS leaves sufficient space and channels for the loading of the post-sequence CdSe inside the films. Further with the help of electric field forces, the growth and distribution of CdSe in the film are also well regulated. Finally, the rapid growth and uniform distribution of CdS/CdSe co-sensitized QDs in TiO 2 mesoporous films as well as a high loading amount of QDs are attained. The resulting CdS/CdSe co-sensitized QDSSCs exhibits an outstanding efficiency of 5.7%, and a remarkable stability after over 660 min.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Beyond 3rd generation solar cells and the full spectrum project. Recent advances and new emerging solar cells
2. A review on quantum dot sensitized solar cells: past, present and future towards carrier multiplication with a possibility for higher efficiency10.1016/j.solener.2020.04.044 ↗
3. The promise and challenge of nanostructured solar cells10.1038/nnano.2014.292 ↗
4. Recent progress in quantum dot-sensitized solar cells employing metal chalcogenides10.1039/C9TA10557C ↗
5. Recent advances in quantum dot-sensitized solar cells: insights into photoanodes, sensitizers, electrolytes and counter electrodes10.1039/C7SE00137A ↗
6. Quantum dot-sensitized solar cells10.1039/C8CS00431E ↗
7. Quantum-dot-sensitized solar cells10.1002/cphc.201000069 ↗
8. Efficiency of hot-carrier solar energy converters10.1063/1.331124 ↗
9. Hot carrier solar cells and the potential of perovskites for breaking the Shockley-Queisser limit10.1039/C8TC04641G ↗
10. Detailed balance limit of efficiency of pn junction solar cells10.1063/1.1736034 ↗
11. Beyond shockley-queisser: molecular approaches to high efficiency photovoltaics10.1021/acs.jpclett.5b00716 ↗
12. Dual ligand capped quantum dots improving loading amount for high efficiency quantum dot-sensitized solar cells10.1021/acsenergylett.2c02270 ↗
13. Current challenges in the development of quantum dot sensitized solar cells10.1002/aenm.202001774 ↗
14. Performance improvement strategies for quantum dot-sensitized solar cells: a review10.1039/C8TA11483H ↗
15. Capping ligand-induced self-assembly for quantum dot sensitized solar cells10.1021/acs.jpclett.5b00001 ↗
16. Fabrication of micro/nano-composite porous TiO2 electrodes for quantum dot-sensitized solar cells10.1016/j.jpowsour.2013.12.033 ↗
17. Enhanced performance of CdS/CdSe quantum dot cosensitized solar cells via homogeneous distribution of quantum dots in TiO2 film10.1021/jp3058838 ↗
18. Efficient CdSe quantum dot-sensitized solar cells prepared by a postsynthesis assembly approach10.1039/c2cc36526j ↗
19. Facile secondary deposition for improving quantum dot loading in fabricating quantum dot solar cells10.1021/jacs.8b10901 ↗
20. Boosting the performance of environmentally friendly quantum dot-sensitized solar cells over 13% efficiency by dual sensitizers with cascade energy structure10.1002/adma.201903696 ↗
21. Improving the efficiency of quantum dot sensitized solar cells beyond 15% via secondary deposition10.1021/jacs.1c01214 ↗
22. Enhancing loading amount and performance of quantum-dotsensitized solar cells based on direct adsorption of quantum dots from bicomponent solvents10.1021/acs.jpclett.8b03713 ↗
23. Zn-Cu-In-S-Se quinary “green” alloyed quantum-dot-sensitized solar cells with a certified efficiency of 14.410.1002/anie.202014723 ↗
24. Zn-Cu-In-Se quantum dot solar cells with a certified power conversion efficiency of 11.610.1021/jacs.6b00615 ↗
25. Cosensitized quantum dot solar cells with conversion efficiency over 12
26. Facile and reproducible synthesis of red-emitting CdSe nanocrystals in amine with long-term fixation of particle size and size distribution10.1021/jp064797d ↗
27. Band engineering enables highly efficient and stable photoelectrochemical hydrogen evolution
28. Bifunctional multidentate ligand modified highly stable water-soluble quantum dots10.1021/ic902469d ↗
29. Influence of deposition strategies on CdSe quantum dot-sensitized solar cells: a comparison between successive ionic layer adsorption and reaction and chemical bath deposition10.1039/C5TA01461A ↗
30. Multilayered semiconductor (CdS/CdSe/ZnS)-sensitized TiO2 mesoporous solar cells: all prepared by successive ionic layer adsorption and reaction processes10.1021/cm102024s ↗
31. Efficient CdSe quantum dot-sensitized solar cells prepared by an improved successive ionic layer adsorption and reaction process10.1021/nl902438d ↗
32. Effective bandgap lowering of CdS deposited by successive ionic layer adsorption and reaction10.1021/jp3105453 ↗
33. Influence of cationic precursors on CdS quantum-dot-sensitized solar cell prepared by successive ionic layer adsorption and reaction10.1021/jp410615b ↗
34. Quantum-confined CdTe films deposited by SILAR and their photoelectrochemical stability in the presence of Se2- as a hole scavenger10.1021/jp503971r ↗
35. How does a SILAR CdSe film grow? Tuning the deposition steps to suppress interfacial charge recombination in solar cells10.1021/jz500481v ↗
36. Multifunctional nitrogen-doped graphene quantum dots incorporated into mesoporous TiO2 films for quantum dot-sensitized solar cells10.1016/j.jallcom.2021.159527 ↗
37. Quantum dots processed by SILAR for solar cell applications10.1016/j.solener.2018.02.003 ↗
38. Tuning band alignment by CdS layers using SILAR method to enhance TiO2/CdS/CdSe quantum-dot solar-cell performance10.1039/C6CC01664B ↗
39. Performance enhancement of quantum-dot-sensitized solar cells by potential-induced ionic layer adsorption and reaction10.1021/am5054916 ↗
40. Voltage-assisted SILAR deposition of CdSe quantum dots into mesoporous TiO2 film for quantum dot-sensitized solar cells10.1016/j.cplett.2019.136764 ↗
41. Voltage-assisted SILAR deposition of CdSe quantum dots to construct a high performance of ZnS/CdSe/ZnS quantum dot-sensitized solar cells10.1016/j.jcis.2020.10.132 ↗
42. Highly efficient quantum-dot-sensitized solar cell based on co-sensitization of CdS/CdSe10.1002/adfm.200800940 ↗
43. Dynamic study of highly efficient CdS/CdSe quantum dot-sensitized solar cells fabricated by electrodeposition10.1021/nn203375g ↗
44. Highly efficient inverted type-I CdS/CdSe core/shell structure QD-sensitized solar cells10.1021/nn300278z ↗
45. TiO2@CdSe/CdS core-shell hollow nanospheres solar paint10.1039/C4RA03845B ↗
46. CdS/CdSe-cosensitized TiO2 photoanode for quantum-dot-sensitized solar cells by a microwave-assisted chemical bath deposition method10.1021/am200648b ↗
47. Effect of different sensitization technique on the photoconversion efficiency of CdS quantum dot and CdSe quantum rod sensitized TiO2 solar cells10.1021/acs.jpcc.5b01525 ↗
48. Effects of anode structures and fabrication methods on cell efficiencies of CdS/CdSe quantum dot co-sensitized solar cells10.1016/j.jallcom.2015.04.188 ↗
49. The optical and electrochemical properties of CdS/CdSe co-sensitized TiO2 solar cells prepared by successive ionic layer adsorption and reaction processes10.1016/j.solener.2012.01.006 ↗
50. Modeling high-efficiency quantum dot sensitized solar cells10.1021/nn101534y ↗
51. Effects of passivation treatment on performance of CdS/CdSe quantum-dot co-sensitized solar cells10.1016/j.tsf.2012.11.031 ↗
52. Fabrication, characterization, and optimization of CdS and CdSe quantum dot-sensitized solar cells with quantum dots prepared by successive ionic layer adsorption and reaction10.1155/2014/939423 ↗
53. Quantum dot sensitized solar cell based on the different photoelectrodes for the enhanced performance10.1016/j.solmat.2019.03.038 ↗
54. Pulsed voltage deposited lead selenide thin film as efficient counter electrode for quantum-dot-sensitized solar cells10.1016/j.apsusc.2016.02.095 ↗
55. TiO2/CdS/CdSe quantum dots co-sensitized solar cell with the staggered-gap (type-II) heterojunctions for the enhanced photovoltaic performance10.1016/j.ceramint.2022.11.034 ↗
56. CdSe-sensitized mesoscopic TiO2 solar cells exhibiting >5% efficiency: redundancy of CdS buffer layer10.1039/c2jm33211f ↗
57. Structural evolution from the CdSSe alloy to the CdS/CdSe core/shell in Cd(S and Se) composite quantum dots and its impact on the performance of sensitized solar cells10.1039/D1DT02061G ↗
58. Pulsed voltage deposited hierarchical dendritic PbS film as a highly efficient and stable counter electrode for quantum-dot-sensitized solar cells10.1039/C8TC02067A ↗
59. Energy level alignment, electron injection, and charge recombination characteristics in CdS/CdSe cosensitized TiO2 photoelectrode10.1063/1.3533642 ↗
60. Photo-induced charge transfer dynamics in efficient TiO2/CdS/CdSe sensitized solar cells10.1039/c1ee02088a ↗
61. Charge transfer in the heterointerfaces of CdS/CdSe cosensitized TiO2 photoelectrode10.1021/jp209353j ↗
62. CdS/CdSe co-sensitized TiO2 photoelectrode for efficient hydrogen generation in a photoelectrochemical cell10.1021/cm901762h ↗
63. Antimony tin oxide/lead selenide composite as efficient counter electrode material for quantum dot-sensitized solar cells10.1016/j.jcis.2021.04.073 ↗
64. ATO/CuS composite counter electrodes enhanced the photovoltaic performance of quantum dot sensitized solar cells10.1016/j.inoche.2022.109273 ↗
65. Efficient way to assemble CdS nanorose-decorated CdSe tetrakaidecahedron heterojunction photoanodes for high photoelectrochemical performance10.1021/acssuschemeng.9b04868 ↗
66. CdS/Zr:Fe2O3 nanorod arrays with Al2O3 passivation layer for photoelectrochemical solar hydrogen generation10.1002/cssc.201700140 ↗
67. Study of the influence of annealing on the properties of CBD-CdS thin films10.1016/S0169-4332(02)01082-6 ↗
68. Double-shelled hollow nanosphere assembled by TiO2@surface sulfate functionalized CdS for boosting photocatalysis reduction of U(VI) under seawater conditions10.1016/j.cej.2021.133256 ↗
69. Fabrication, characterization and photoelectrochemical properties of CdS/CdSe nanofilm co-sensitized ZnO nanorod arrays on Zn foil substrate10.1016/j.jcis.2020.12.078 ↗
70. A research on the visible light photocatalytic activity and kinetics of CdS/CdSe co-modified TiO2 nanotube arrays10.1016/j.surfcoat.2014.10.066 ↗
71. Photoelectric performance of TiO2 nanotube array photoelectrodes sensitized with CdS0.54Se0.46 quantum dots10.1016/j.apsusc.2015.07.169 ↗
72. Photoelectrochemical properties of chemically deposited cadmium sulphoselenide (CdS1-xSex/ITO) thin films10.1016/j.vacuum.2020.109277 ↗
73. One-pot synthesis and characterization of high-quality CdSe/ZnX (X=S, Se) nanocrystals via the CdO precursor10.1016/j.jcrysgro.2004.01.064 ↗
74. Photoelectrochemical cells10.1038/35104607 ↗