Adjustment of resistivity for phosphorus-doped n-type multicrystalline silicon
Source abstract
Abstract
In this work we present a novel approach to reduce inhomogeneity of resistivity for n-type phosphorus-doped directionally solidified silicon ingots by using complex arrangements on influencing dopant transport during growth process, which involves adjustments of melt flow and gas transport. In order to obtain more uniform resistivity profile over ingot`s height, different process conditions were tested on G1-sized (22 × 22 × 12 cm 3 ) n-type directionally solidified ingots, including altering of ambient gas pressure, enhanced melt mixing with travelling magnetic fields and variations of argon flow above the melt. The quality of ingots was characterised in terms of electrical resistivity and minority carrier lifetime, as well as the presence of impurities and inclusions. The influence of process parameters on material quality will be discussed. It will be shown that a complex approach to melt stirring and gas transport is an effective way to control resistivity distribution along the height of phosphorus-doped multicrystalline ingots, which makes it possible to provide n-type ingots with resistivity profiles comparable to p-type boron-doped ones.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Minority carrier lifetime degradation in boron-doped Czochralski silicon10.1063/1.1389076 ↗
2. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
3. Excellent average diffusion lengths of 600 μm of N-type multicrystalline silicon wafers after the full solar cell process including boron diffusion10.1016/j.egypro.2013.05.038 ↗
4. 2022
5. Advancements in n-type base crystalline silicon solar cells and their emergence in the photovoltaic industry10.1155/2013/470347 ↗
6. Emerging frontiers of N-Type silicon material for photovoltaic applications: the impurity-defect interactions
7. 2022
8. Advanced process for n-type mono-like silicon a-Si:H/c-Si heterojunction solar cells with 21.5% efficiency10.1016/j.solmat.2014.02.025 ↗
9. High-efficiency n-type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
10. Pickerel · 2022
11. Characterization of n-type mono-crystalline silicon ingots produced by continuous Czochralski (Cz) Technology10.1016/j.egypro.2015.07.095 ↗
12. Minority carrier lifetime of n-type mono-crystalline silicon produced by continuous Czochralski technology and its effect on hetero-junction solar cells10.1016/j.egypro.2016.07.048 ↗
13. Influence of extraordinary long ingot heights on the wafer quality of high performance multi-crystalline silicon for PV application
14. Engh · 1992
15. Mass transfer of phosphorus in silicon melts under vacuum induction refining10.1007/s11663-010-9422-0 ↗
16. Vacuum refining of molten silicon10.1007/s11663-012-9728-1 ↗
17. Phosphorus removal from upgraded metallurgical-grade silicon by vacuum directional solidification10.1016/j.vacuum.2017.08.037 ↗
18. Phosphorus removal from silicon by vacuum refining and directional solidification10.1007/s11664-013-2811-9 ↗
19. Distribution of phosphorus in n-type multicrystalline silicon produced by directional solidification10.1109/JPHOTOV.2018.2866182 ↗
20. The influence of travelling magnetic field on phosphorus distribution in n-type multi-crystalline silicon10.1016/j.jcrysgro.2018.11.002 ↗
21. Crystal growth from melt in combined heater-magnet modules
22. Numerical study on improved mixing in silicon melts by double-frequency TMF10.1016/j.jcrysgro.2010.10.094 ↗
23. The quantitative effect of rapid cooling upon the constitution of binary alloys
24. Bemerkungen zur Schichtkristallbildung
25. Brice · 1965
26. The incorporation of phosphorus in silicon; the temperature dependence of the segregation coefficient10.1016/0022-0248(75)90147-5 ↗
27. A model for distribution of oxygen in multicrystalline silicon ingot grown by directional solidification10.1016/j.solmat.2007.05.024 ↗
28. Unsteady coupled 3D calculations of melt flow, interface shape, and species transport for directional solidification of silicon in a traveling magnetic field10.1016/j.jcrysgro.2012.12.135 ↗
29. Removal of Cu, Mn and Na in multicrystalline silicon by directional solidification under low vacuum condition10.1016/j.vacuum.2015.02.006 ↗
30. A mathematical model for distribution of calcium in silicon by vacuum directional solidification10.2298/JMMB141203012Z ↗
31. Kinetics of volatile impurities removal from silicon by electron beam melting for photovoltaic applications10.1039/C7CP05080A ↗
32. Buchovska · 2021
33. Resistivity-dopant density relationship for phosphorus-doped silicon10.1149/1.2130006 ↗
34. The crucible/silicon interface in directional solidification of photovoltaic silicon10.1016/j.actamat.2017.02.072 ↗
35. Wetting, infiltration and sticking phenomena in Si3N4 releasing coatings in the growth of photovoltaic silicon10.1016/j.solmat.2009.10.020 ↗
36. Initial stages of silicon–crucible interactions in crystallisation of solar grade silicon: kinetics of coating infiltration10.1016/j.actamat.2014.04.072 ↗
37. Origin of the low carrier lifetime edge zone in multicrystalline PV silicon10.1002/pip.876 ↗
38. Crystal growth of high-purity multicrystalline silicon using a unidirectional solidification furnace for solar cells10.1016/j.jcrysgro.2010.01.034 ↗
39. Crystallization of 640 kg mc-silicon ingots under traveling magnetic field by using a heater magnet module10.1016/j.jcrysgro.2012.11.049 ↗
40. High-temperature refining of metallurgical-grade silicon: a review