journal article·2016-12

The sodium nitrate–urea eutectic binary mixture as a phase change material for medium temperature thermal energy storage. Part II: Accelerated thermal cycling test and water uptake behavior of the material

G. Diarce, E. Corro-Martínez, Á. Campos-Celador, A. García-Romero, J.M. Sala

Publisher page

Abstract

Abstract This research studies a binary mixture composed of sodium nitrate and urea for use as a phase change material in latent thermal energy storage systems between 75 and 90 °C. This temperature is suitable for heating and domestic hot water applications, such as solar thermal systems and cogeneration devices. This work is divided into two parts. In Part I, the phase diagram of the system was experimentally determined via DSC, the synthetic visual method and X-ray diffraction. A eutectic composition was found at 71.25% (w/w) urea and 21.75% (w/w) sodium nitrate. The main thermal properties and density of this composition were studied in detail to evaluate its potential as a PCM. The results showed a melting temperature of 85 °C and a melting enthalpy of 172 J/g. These properties are suitable for the intended purpose. Currently, the mixture presents an approximated market price below 1€/kg, which is highly competitive. In this Part II, the water uptake of the material was evaluated to gain knowledge of its hygroscopic behavior. XRD measurements were also performed to study the formation of new phases or compounds caused by the presence of water. In addition, because urea undergoes thermal degradation upon heating, a preliminary accelerated thermal cycling study was performed to determine the thermal reliability of the mixture. After 210 accelerated thermal cycles, the latent melting enthalpy of the sample was reduced by 1.2%. These results were complemented by chromatographic analysis used to detect any presence of degradation byproducts. According to the results, the mixture formed by sodium nitrate and urea shows potential for use as a PCM in the applicable temperature range. Further research focused on thermal degradation over longer periods of use is encouraged to establish whether the material has a proper lifespan for actual thermal energy storage applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Design of a finned plate latent heat thermal energy storage system for domestic applications10.1016/j.egypro.2014.02.035 ↗
2. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
3. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
4. Eutectic mixtures of sugar alcohols for thermal energy storage in the 50–90°C temperature range10.1016/j.solmat.2014.11.050 ↗
5. Physical properties data compilations relevant to energy storage
6. Investigation of latent heat-thermal energy storage materials. II. Thermoanalytical evaluation of urea10.1016/0040-6031(84)80029-5 ↗
7. Enthalpie de fusion de l uree et de quelques melanges eutectiques a base d’uree10.1016/0040-6031(87)88032-2 ↗
8. K. Kauffman, I. Gruntfest, Congruently Melting Materials for Thermal Energy Storage – NCEMP-20 Report, Philadelphia, 1973.
9. Quimidroga, s.a., 〈http://quimidroga.com/〉 (accessed 10.11.15).
10. Thermophysical properties of some organic phase change materials for latent heat storage. A review10.1016/j.solener.2014.05.001 ↗
11. Review on the methodology used in thermal stability characterization of phase change materials10.1016/j.rser.2015.04.187 ↗
12. Thermal stability of phase change materials used in latent heat energy storage systems: a review10.1016/j.rser.2012.10.022 ↗
13. Thermal decomposition (pyrolysis) of urea in an open reaction vessel10.1016/j.tca.2004.05.018 ↗
14. Urea thermolysis and NOx reduction with and without SCR catalysts10.1016/S0926-3373(03)00177-2 ↗
15. Hydrolysis and thermolysis of urea and its decomposition byproducts biuret, cyanuric acid and melamine over anatase TiO210.1016/j.apcatb.2011.12.013 ↗
16. Thermal cycle test of urea for latent heat storage applications10.1002/er.692 ↗
17. Thermal analysis of phase change materials in the temperature range 120–150°C10.1016/j.tca.2010.11.011 ↗
18. Identification of urea decomposition from an SCR perspective; a combination of experimental work and molecular modeling10.1016/j.cej.2013.06.124 ↗
19. Adsorption and catalytic thermolysis of gaseous urea on anatase TiO2 studied by HPLC analysis, DRIFT spectroscopy and DFT calculations10.1016/j.apcatb.2013.01.009 ↗
20. 2007
21. Influence of the experimental conditions on the subcooling of Glauber׳s salt when used as PCM10.1016/j.solmat.2012.03.003 ↗