Transforming waste aramid fibers and carbon fibers into aerogels for efficient solar-driven water desalination
Source abstract
Abstract
Solar energy is an abundant renewable source of energy for seawater desalination. Interfacial solar water evaporation technology based on photothermal processes is one of the most effective ways of utilizing solar energy. However, practical challenges such as low efficiency, complexity, and poor durability, have hindered the widespread adoption of this technology. To tackle these challenges, research has been focused on developing materials that exhibit broad-spectrum light absorption, high mechanical and thermal stability, and low thermal conductivity. Moreover, growing waste from high-performance materials such as aramid fibers and carbon fibers highlights the need for sustainable practices, such as upcycling these fibers instead of relying on new resources. In this study, we have demonstrated the upcycling of waste aramid fibers and carbon fibers into aerogels for water evaporators. The incorporation of MXene into the aerogels has significantly enhanced light absorption compared to both ANF and ANF-CF aerogels. This improvement, along with increased photothermal efficiency and hydrophilicity, led to an optimized structure with a solar-to-vapor conversion efficiency of 103.6 % and an evaporation rate of 1.63 kg m⁻ 2 h⁻ 1 under one sun. The MXene/aramid fiber/carbon fiber aerogels, with their three-dimensional structure, provided the foundation for the development of stable solar interfacial evaporators that could efficiently convert seawater into clean drinking water through high light absorption and mechanical stability. • Recycled aramid and carbon fibers were combined with MXene for solar steam generation. • The MXene@ANF-CF aerogel exhibited outstanding solar steam generation efficiency and evaporation rate. • MXene significantly improved the aerogel's light absorption across UV, visible and NIR spectra. • This study demonstrates using cost effective recycled materials for solar steam generation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar-Powered Water Purification Methods · Membrane Separation Technologies · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Solar-driven photothermal nanostructured materials designs and prerequisites for evaporation and catalysis applications10.1039/C7MH01064H ↗
2. A review of natural materials for solar evaporation10.1016/j.solmat.2020.110814 ↗
3. Progress in the modification of reverse osmosis (RO) membranes for enhanced performance10.1016/j.jiec.2018.07.010 ↗
4. High performance cross-linked dehydro-halogenated poly (vinylidene fluoride-co-hexafluoro propylene) based anion-exchange membrane for water desalination by electrodialysis10.1016/j.seppur.2019.116078 ↗
5. Atmospheric plasma coatings for membrane distillation10.1016/j.memsci.2018.02.067 ↗
6. Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability10.1016/j.desal.2012.10.015 ↗
7. Solar thermal desalination technologies10.1016/j.desal.2007.01.059 ↗
8. Pathways and challenges for efficient solar-thermal desalination10.1126/sciadv.aax0763 ↗
9. A Janus and superhydrophilic design for stable and efficient high-salinity brine solar interfacial desalination10.1016/j.cej.2022.140777 ↗
10. Solar steam generation by heat localization10.1038/ncomms5449 ↗
11. Ultrahigh solar steam generation rate of a vertically aligned reduced graphene oxide foam realized by dynamic compression10.1039/D1TA03014K ↗
12. Breath‐figure self‐assembled low‐cost janus fabrics for highly efficient and stable solar desalination10.1002/adfm.202113258 ↗
13. MXene-coated membranes for autonomous solar-driven desalination10.1021/acsami.1c20653 ↗
14. Tailoring polypyrrole-based Janus aerogel for efficient and stable solar steam generation10.1016/j.desal.2021.115228 ↗
15. Fibrous aerogels for solar vapor generation
16. Based membranes on silicone floaters for efficient and fast solar-driven interfacial evaporation under one sun10.1039/C7TA03262E ↗
17. Extremely high water-production created by a nanoink-stained PVA evaporator with embossment structure10.1016/j.nanoen.2018.11.002 ↗
18. A solar evaporator based on hollow polydopamine nanotubes with all-in-one synergic design for highly-efficient water purification10.1039/D1TA03335B ↗
19. Portable low‐pressure solar steaming‐collection unisystem with polypyrrole origamis10.1002/adma.201900720 ↗
20. Salt‐resistant carbon nanotubes/polyvinyl alcohol hybrid gels with tunable water transport for high‐efficiency and long‐term solar steam generation10.1002/ente.201900721 ↗
21. Accelerated solar steam generation for efficient ions removal10.1016/j.jcis.2019.10.055 ↗
22. Tailoring aerogels and related 3D macroporous monoliths for interfacial solar vapor generation10.1002/adfm.201907234 ↗
23. Zhou · Composites, Part B · 2016 · 88 · 20110.1016/j.compositesb.2015.10.035 ↗
24. Ultra-robust carbon fibers for multi-media purification via solar-evaporation10.1039/C8TA08829B ↗
25. Highly efficient solar vapor generator enabled by a 3D hierarchical structure constructed with hydrophilic carbon felt for desalination and wastewater treatment10.1021/acsami.9b08480 ↗
26. Commercially available activated carbon fiber felt enables efficient solar steam generation10.1021/acsami.7b18071 ↗
27. Carbon fabric based solar steam generation for waste water treatment10.1016/j.solener.2017.11.055 ↗
28. Highly efficient solar steam generation from activated carbon fiber cloth with matching water supply and durable fouling resistance10.1021/acsaem.9b00562 ↗
29. A review on recycling of carbon fibres: methods to reinforce and expected fibre composite degradations10.3390/ma15144991 ↗
30. Carbon fibers waste recovery via pyro-gasification: semi-industrial pilot plant testing and LCA10.3390/su14073744 ↗
31. Vacuum-dried and intrinsic photothermal phenolic carbon aerogel from coal tar rich in polycyclic aromatics for efficient solar steam generation10.1021/acs.iecr.2c04430 ↗
32. Interfacial engineering of MXene-based composite aerogel for high-performance, multifunctional solar steam generator10.1016/j.desal.2023.116910 ↗
33. A hydrophobic surface enabled salt-blocking 2D Ti 3 C 2 MXene membrane for efficient and stable solar desalination10.1039/C8TA05569F ↗
34. 3D macroscopic graphene oxide/MXene architectures for multifunctional water purification10.1016/j.carbon.2020.06.023 ↗
35. Vertically aligned reduced graphene oxide/Ti 3 C 2 T x MXene hybrid hydrogel for highly efficient solar steam generation10.1007/s12274-020-2970-y ↗
36. MXene (Ti C Tx) based nanosheet photocatalysts for water remediation: challenges and recent developments
37. Advances of 2D‐enabled photothermal materials in hybrid solar‐driven interfacial evaporation systems toward water‐fuel‐energy crisis10.1002/adfm.202304936 ↗
38. Mussel inspired highly aligned Ti3C2T x MXene film with synergistic enhancement of mechanical strength and ambient stability10.1021/acsnano.0c04411 ↗
39. Regulating the absorption spectrum of polydopamine10.1126/sciadv.abb4696 ↗
40. Two‐dimensional MXene‐polymer heterostructure with ordered in‐plane mesochannels for high‐performance capacitive deionization10.1002/ange.202111823 ↗
41. A MXene‐based hierarchical design enabling highly efficient and stable solar‐water desalination with good salt resistance10.1002/adfm.202007110 ↗
42. The Kevlar story—an advanced materials case study10.1002/ange.19891010539 ↗
43. Recycling of high-value-added aramid nanofibers from waste aramid resources via a feasible and cost-effective approach10.1021/acsnano.1c00463 ↗
44. Recycling of the fibrous fraction of reinforced thermoset composites10.1002/pc.10468 ↗
45. Fabrication, applications, and prospects of aramid nanofiber10.1002/adfm.202000186 ↗
46. Branched aramid nanofibers10.1002/anie.201703766 ↗
47. Ultrafast, cost-effective and scaled-up recycling of aramid products into aramid nanofibers: mechanism, upcycling, closed-loop recycling10.1039/D1GC01805A ↗
48. MXene coupled with molybdenum dioxide nanoparticles as 2D-0D pseudocapacitive electrode for high performance flexible asymmetric micro-supercapacitors10.1016/j.jmat.2019.12.013 ↗
49. Tension-induced toughening and conductivity enhancement in sequentially bridged MXene fibers10.1088/2053-1583/ac8c51 ↗
50. Dispersions of aramid nanofibers: a new nanoscale building block10.1021/nn2014003 ↗
51. Nanofibrous kevlar aerogel films and their phase-change composites for highly efficient infrared stealth10.1021/acsnano.8b08913 ↗
52. Timesaving, high-efficiency approaches to fabricate aramid nanofibers10.1021/acsnano.9b02258 ↗
53. Ali · 2024
54. Polydopamine-based polysaccharide materials for water treatment10.1007/s10570-022-04787-0 ↗
55. Structural evolution of polyacrylonitrile precursor fibers during preoxidation and carbonization10.1007/s00289-007-0796-3 ↗
56. Structural transformation of polyacrylonitrile fibers during stabilization and low temperature carbonization10.1016/j.polymdegradstab.2016.02.029 ↗
57. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)10.1351/pac198557040603 ↗
58. An all-in-one and scalable carbon fibre-based evaporator by using the weaving craft for high-efficiency and stable solar desalination10.1039/D1TA01295A ↗
59. Self‐contained monolithic carbon sponges for solar‐driven interfacial water evaporation distillation and electricity generation
60. Tailoring of a robust asymmetric aramid nanofibers/MXene aerogel film for enhanced infrared thermal camouflage and Joule heating performances10.1007/s12274-023-5895-4 ↗
61. Preparation of graphitized carbon-coated glass fiber cloth materials with high mechanical strength, corrosion resistance, and solar-driven water evaporation performance10.1016/j.solmat.2022.112015 ↗
62. Transforming waste polystyrene foam to carbon on zeolite for efficient solar water desalination10.1016/j.jece.2024.113486 ↗