journal article·2024-08

Preparation and heat storage characteristics of high-temperature phase change macrocapsules of chloride eutectic salt

Lijuan Zhang, Hongwei Zhu, Lingxiao Zeng, Nan Sheng, Zhonghao Rao, Chunyu Zhu

Publisher page

Abstract

Chloride salts, as high-temperature phase change materials (PCMs), have advantages in terms of high application temperature and high latent heat, but the intrinsic disadvantages such as high corrosiveness and easy leakage have seriously limited their development. Employing the NaCl–KCl binary salt as PCM, a double-shell cladding strategy with an inner layer of expanded graphite and an outer layer of ceramic was proposed, thereby, the chloride phase change macrocapsule with good thermal storage performance was successfully prepared. The double-shell capsules exhibited better leakage resistance and cycling stability. On this basis, the preparation process of double-shell eutectic salt macrocapsules was simplified by using an in-situ melting method, employing the mixed NaCl and KCl as raw materials directly that were transferred to eutectic binary salt inside the capsules during sintering. It is also proposed to improve the heat storage density of the capsules by increasing the capsule size and isostatically pressing the capsule. The NaK-20-200MPa sample indicated the largest heat storage density in the temperature range from 600 °C to 700 °C, with a mass heat storage density of 190.38 J/g, which was 2.85 % higher than that of the NaK-20-0MPa capsules and 36.99 % higher than that of the NaK-5-0MPa capsules. Additionally, the volume heat storage density of the NaK-20-200MPa capsules was 339.19 J/cm 3, which was 14.69 % higher than that of the NaK-20-0MPa capsules and 21.52 % higher than that of the NaK-5-0MPa capsules. The good thermal performance and low cost of chloride PCM could ensure the encapsulated salt for use in high-temperature heat storage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Phase-change materials and chalcogenides · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Challenges and innovative development opportunities of carbon peak and carbon neutralization faced by inorganic salt industry
2. Addressing energy storage needs at lower cost via on-site thermal energy storage in buildings10.1039/D1EE01992A ↗
3. Molten salt for advanced energy applications: a review
4. Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature10.1016/j.rser.2017.10.080 ↗
5. Molten salts: potential candidates for thermal energy storage applications10.1002/er.8441 ↗
6. Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.02.064 ↗
7. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
8. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
9. Engineering molten MgCl2–KCl–NaCl salt for high-temperature thermal energy storage: review on salt properties and corrosion control strategies
10. A study of LiNO3–NaCl/EG composite PCM for latent heat storage10.1007/s10765-021-02908-8 ↗
11. Form stable binary chlorides/expanded graphite composite material with enhanced compressive strength for high temperature thermal storage10.1016/j.est.2020.101611 ↗
12. An experimental investigation of composite phase change materials of ternary nitrate and expanded graphite for medium-temperature thermal energy storage10.1016/j.solener.2019.11.102 ↗
13. Novel MgCl 2 -KCl/expanded graphite/graphite paper composite phase change blocks with high thermal conductivity and large latent heat10.1016/j.solener.2017.10.083 ↗
14. Effect of EG particle size on the thermal properties of NaNO3–NaCl/EG shaped composite phase change materials
15. Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage10.1016/j.partic.2013.09.002 ↗
16. Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
17. Study on preparation and heat storage performance of phosphogypsum-based composite phase change materials
18. High-temperature carbonate/MgO composite materials as thermal storage media for double-walled solar reformer tubes10.1016/j.solener.2008.05.011 ↗
19. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
20. Thermal conductivity improvement of liquid Nitrate and Carbonate salts doped with MgO particles
21. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
22. Preparation and characterization of a heat storage material: shape-stabilized KNO3 using a modified diatomite-based porous ceramic as the skeleton10.1016/j.ceramint.2021.06.040 ↗
23. Form-stable ternary carbonates/MgO composite material for high temperature thermal energy storage10.1016/j.solener.2019.01.002 ↗
24. A review on synthesis, characterization and application of nanoencapsulated phase change materials for thermal energy storage systems
25. A review of microencapsulated thermochromic coatings for sustainable building applications10.1007/s11998-020-00396-3 ↗
26. Review of encapsulated salt hydrate core-shell phase change materials10.14356/kona.2020010 ↗
27. A comprehensive review of hydrodynamic mechanisms and heat transfer characteristics for microencapsulated phase change slurry (MPCS) in circular tube10.1016/j.rser.2019.109312 ↗
28. Thermal properties and applications of microencapsulated PCM for thermal energy storage: a review10.1016/j.applthermaleng.2018.11.007 ↗
29. A polyurethane solid–solid phase change material for flexible use in thermal management10.1016/j.cej.2024.150930 ↗
30. Experimental and numerical study on the performance of a new high-temperature packed-bed thermal energy storage system with macroencapsulation of molten salt phase change material10.1016/j.apenergy.2018.03.156 ↗
31. High temperature calorimetry and use of magnesium chloride for thermal energy storage10.1016/j.renene.2012.08.036 ↗
32. A review on technical, applications and economic aspect of packed bed solar thermal energy storage system
33. Development of topology-optimized structural cavities macro-encapsulating chloride salt by gel-casting for high-temperature thermal energy storage
34. Macroencapsulation of sodium chloride as phase change materials for thermal energy storage10.1016/j.solener.2018.02.045 ↗
35. Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
36. Macro-encapsulation and characterization of chloride based inorganic Phase change materials for high temperature thermal energy storage systems10.1016/j.apenergy.2018.03.146 ↗
37. Using encapsulated phase change salts for concentrated solar power plant
38. Development and characterization of NaCl-KCl/Kaolin composites for thermal energy storage10.1016/j.solener.2021.09.020 ↗
39. Wettability of molten Na2CO3-K2CO3 on coal fly ash ceramic substrates with expanded graphite10.1016/j.matchemphys.2020.123861 ↗
40. Molecular dynamics simulation of thermophysical properties of NaCl-KCl phase change materials applied to concentrating solar power