Enhanced performance of Cu2ZnSnS4 based bifacial solar cells with FTO and W/FTO back contacts through absorber air annealing and Na incorporation
Source abstract
Abstract
This study reports on the influence of air annealing and Na incorporation into the absorber on the performance of Cu 2ZnSnS 4 (CZTS) bifacial solar cells with FTO and W/FTO back contacts. Na was incorporated by depositing ∼12 nm thick NaF on the CZTS precursors prior to the sulfurization process via thermal evaporation. After sulfurization, some of the samples were annealed in air at 300 °C for 90 s and subsequently at 200 °C for 600 s. Transmission electron microscopy confirmed sulfurization of the W interlayer to form WS 2 which improves the FTO ohmicity. Na incorporation improved grain size of the absorber as revealed by scanning electron microscopy. Non-annealed samples had the unwanted SnS 2 phase while the air annealed samples, particularly those with both W interlayer and Na incorporation, were exempt from SnS 2 phase, as was confirmed through grazing incident X-ray diffraction and Raman spectroscopy. These results suggest that absorber air annealing and Na incorporation enhance absorber crystal growth which is advantageous in reducing bulk carrier recombination. As a result, the efficiency was significantly improved from 3.0% for solar cells fabricated directly on FTO to 5.2% for those whose absorbers were air annealed, incorporated with Na and made on W/FTO. The latter also exhibits the highest external quantum efficiency response and calculated short circuit current density for both sides illumination. This indicates that the air annealing, Na incorporation and W interlayer are enhancing the performance of bifacial CZTS solar cells with FTO back contact for both back side and front side illumination.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
2. Solar cell efficiency tables (Version 58)10.1002/pip.3444 ↗
3. Estimates of Te and in prices from direct mining of known ores10.1002/pip.899 ↗
4. Kesterite solar cells: insights into current strategies and challenges10.1002/advs.202004313 ↗
5. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Optimization of zinc to tin ratio in a sol gel precursor solution on the growth and properties of annealed CZTS thin films
7. Back and front contacts in kesterite solar cells: state-of-the-art and open questions
8. Bifacial kesterite solar cells on FTO substrates10.1021/acssuschemeng.7b02797 ↗
9. Wide‐gap chalcopyrite solar cells with indium oxide–based transparent back contacts10.1002/solr.202200401 ↗
10. Effects of ITO based back contacts on Cu(In,Ga)Se2 thin films, solar cells, and mini-modules relevant for semi-transparent building integrated photovoltaics10.1016/j.solmat.2022.112169 ↗
11. Ultrathin wide band gap kesterites10.1039/D2FD00052K ↗
12. Formation of transparent and ohmic ZnO:Al/MoSe2 contacts for bifacial Cu(In,Ga)Se2 solar cells and tandem structures10.1016/j.tsf.2004.11.001 ↗
13. Improved performance of electroplated CZTS thin-film solar cells with bifacial configuration10.1002/cssc.201600440 ↗
14. Influence of deposition potential on Cu2ZnSnS4 thin–film solar cells co–electrodeposited on fluorine–doped tin oxide substrates10.1016/j.jallcom.2017.01.114 ↗
15. High efficiency bifacial Cu2ZnSnSe4 thin-film solar cells on transparent conducting oxide glass substrates10.1063/1.4962145 ↗
16. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
17. Bifacial Cu(In,Ga)Se2 solar cells using hydrogen‐doped In2O3 films as a transparent back contact10.1002/pip.3025 ↗
18. Rational defect passivation of Cu2ZnSn(S,Se)4 photovoltaics with solution-processed Cu2ZnSnS4:Na nanocrystals10.1021/ja407202u ↗
19. Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells, Appl
20. Effect of NaF evaporation on morphological and structural properties of Cu2ZnSnSe4 (CZTSe) thin film deposited by sputtering from a single compound target10.1016/j.jallcom.2017.05.098 ↗
21. Na incorporation controlled single phase kesterite Cu2ZnSnS4 solar cell material10.1016/j.matlet.2020.127355 ↗
22. Surface modification through air annealing Cu2ZnSn(S,Se)4 absorbers10.1016/j.tsf.2016.08.030 ↗
23. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
24. Impact of nanoscale elemental distribution in high‐performance kesterite solar cells10.1002/aenm.201402180 ↗
25. Effect of selenized DC sputtered precursor stacking orders on the properties of Cu2ZnSnSe4 absorber layer for thin film solar cells
26. Bandgap engineered Cu2ZnGexSn1−xS4 solar cells using an adhesive TiN back contact layer10.1016/j.jallcom.2021.160478 ↗
27. Inline Cu(In,Ga)Se2 co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
28. de la Peña · Hyperspy/Hyperspy: Release v1. · 2022 · 7
29. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
30. Berg · 2014 · 107
31. Suppression of SnS2 secondary phase on Cu2ZnSnS4 solar cells using multi-metallic stacked nanolayers10.3390/nano13030432 ↗
32. The effects of SnS2 secondary phases on Cu2ZnSnS4 solar cells: a promising mechanical exfoliation method for its removal
33. Electronic and optical properties of single crystal SnS2: an earth-abundant disulfide photocatalyst10.1039/C5TA08214E ↗
34. Effect of Sb and Na incorporation in Cu2ZnSnS4 solar cells
35. Effect of Na doping on the performance and the band alignment of CZTS/CdS thin film solar cell10.1016/j.solener.2020.02.088 ↗
36. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
37. Raman tensor of layered SnS210.1021/acs.jpclett.0c03024 ↗
38. High resolution TEM study of WS2 nanotubes10.1002/pssb.201100076 ↗
39. Interlayer nanoarchitectonics of two‐dimensional transition‐metal dichalcogenides nanosheets for energy storage and conversion applications10.1002/aenm.201700571 ↗
40. Study on the growth parameters and the electrical and optical behaviors of 2D tungsten disulfide10.1021/acsami.9b19820 ↗
41. Cadmium free Cu2ZnSnS4 solar cells with 9.7% efficiency10.1002/aenm.201900439 ↗
42. Enhanced carrier collection from CdS passivated grains in solution- processed Cu2ZnSn(S,Se)4 solar cells10.1021/acsami.5b02435 ↗