Investigation of contact formation mechanism and application of copper-based front contact paste for crystalline silicon solar cells
Source abstract
Abstract
To ensure of the fabrication crystalline Si (c-Si) solar cells at affordable costs, research has been actively conducted on the use of Cu-based pastes as alternatives to their Ag counterparts, which are currently being used as front electrode materials. However, only limited studies have reported on the use of Cu pastes in processes involving high-temperature firing, primarily owing to the issues caused by Cu oxidization and the resulting products acting as deep-level impurities. In this study, the applicability and limitations of Cu-based pastes containing Cu–Ag core–shell particles as the front electrodes of Si solar cells were investigated. A double printing structure with a seed layer of Ag paste was adopted to prevent direct contact between Si and Cu. By analyzing the morphological and electrical properties, the O-mediated electrode-formation mechanism of the Cu-based paste during high-temperature firing under ambient air conditions was evaluated and compared with that of the conventional Ag paste. The electrical parameters of c-Si solar cells were found to always deteriorate when the Cu paste was used, regardless of the electrode structure, owing to the reduction of Cu involved in Ag crystallite formation. Moreover, only contact formation under inert ambient conditions presented electrical parameters similar to those for commercial Ag paste when using high-temperature firing. Finally, the limitations of applying a front electrode paste primarily containing Cu were assessed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. 2021 · 1
2. Multi-pulsed flash light sintering of copper nanoparticle pastes on silicon wafer for highly-conductive copper electrodes in crystalline silicon solar cells10.1016/j.apsusc.2018.08.098 ↗
3. Environmentally friendly, Pb-free Cu front electrode for Si-based solar cell applications10.1016/j.jallcom.2016.05.195 ↗
4. Conductive copper paste for crystalline silicon solar cells
5. A model for screen utility to predict the future of printed solar cell metallization10.1038/s41598-021-83275-0 ↗
6. Finger metallization using pattern transfer printing technology for c-Si solar cell10.1109/JPHOTOV.2020.3007001 ↗
7. Numerical simulation analysis of Ag crystallite effects on interface of front metal and silicon in the PERC solar cell10.3390/en14030592 ↗
8. Silicon solar cells and modules with front contact paste containing copper‐based component10.1002/pip.3424 ↗
9. The use of copper in solar cells and modules 25–28, 37th European Photovolt
10. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
11. Electrochemical nature of contact firing reactions for screen-printed silicon solar cells: origin of “gray finger” phenomenon10.1002/pip.2783 ↗
12. Cu plated I-perl cells: ageing and humidity reliability tests
13. Oxidation mechanism of copper at 623–1073 K10.2320/matertrans.43.2173 ↗
14. Inert drying system for copper paste application in PV, Energy Procedia
15. Passivated busbars from screen-printed low-temperature copper paste10.1016/j.egypro.2014.08.052 ↗
16. Preparation of cupric oxide by isothermal oxidation of metallic copper powder produced by electroless deposition10.3103/S1067821214060078 ↗
17. Preparation of Cu@Ag core–shell nanoparticles using a two-step polyol process under bubbling of N2 gas10.1246/cl.2009.518 ↗
18. Fabricating high temperature used solders with Cu@Ag core-shell micro-nano particle addition
19. Sintering mechanism of the Cu–Ag core–shell nanoparticle paste at low temperature in ambient air10.1039/C6RA16474A ↗
20. Oxidation behavior of Cu–Ag core–shell particles for solar cell applications10.1016/j.jallcom.2013.02.048 ↗
21. Formation of air-stable copper–silver core–shell nanoparticles for inkjet printing10.1039/b821327e ↗
22. Oxidation‐resistant Cu‐based metallisation for Si solar cells10.1002/ese3.1082 ↗
23. Oxidation and protection in copper and copper alloy thin films10.1063/1.349344 ↗
24. Production of oxidation-resistant Cu-based nanoparticles by wire explosion10.1038/srep18333 ↗
25. Ultrahigh oxidation resistance and high electrical conductivity in copper–silver powder10.1038/srep39650 ↗
26. Deep levels of copper in silicon10.1063/1.339564 ↗
27. Transition metals in silicon10.1007/BF00617708 ↗
28. Large area copper plated silicon solar cell exceeding 19.5% efficiency10.1016/j.egypro.2012.05.008 ↗
29. Industrial Si solar cells with Cu-based plated contacts10.1109/JPHOTOV.2015.2478067 ↗
30. Long term stability of copper front side contacts for crystalline silicon solar cells10.1016/j.solmat.2014.12.024 ↗
31. Reduce on the cost of photovoltaic power generation for polycrystalline silicon solar cells by double printing of Ag/Cu front contact layer10.1007/s13391-018-0076-4 ↗
32. Role of the ambient oxygen on the silver thick-film contact formation for crystalline silicon solar cells10.1016/j.cap.2009.11.054 ↗
33. Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells10.1007/s12540-009-0307-1 ↗
34. Electrochemical nature of contact firing reactions for screen-printed silicon solar cells: origin of “gray finger” phenomenon10.1002/pip.2783 ↗
35. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
36. Thermodynamic study on the Ag-Pb-O system at 1273 K10.2320/matertrans.46.1861 ↗
37. Activity coefficient of AgO0.5 in the PbO-SiO2 melt at 1273 K10.2320/matertrans.MRA2006251 ↗
38. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
39. Influence of oxygen on Ag ionization in molten lead borosilicate glass during screen-printed Ag contact formation for Si solar cells10.1016/j.electacta.2013.05.109 ↗
40. Fine line double printing and advanced process control for cell manufacturing10.1016/j.egypro.2015.03.295 ↗
41. Double screen printed metallization of crystalline silicon solar cells as low as 30-μm metal line width for mass production10.1016/j.solmat.2012.01.018 ↗
42. Double printing nPERT cells with narrow contact layers10.1016/j.egypro.2016.07.105 ↗
43. Understanding the impact of double screen-printing on silicon solar cells by 2-D numerical simulations 37th IEEE Photovolt
44. Advanced fine line double printing process for manufacturing high efficiency silicon wafer solar cells10.1016/j.solener.2019.01.020 ↗
45. Suckow
46. Humps in dark I-V-curves-analysis and explanation10.1109/PVSC.1993.347163 ↗
47. Series resistance imaging of solar cells by voltage dependent electroluminescence10.1063/1.2804562 ↗
48. Fast series resistance imaging for silicon solar cells using electroluminescence10.1002/pssr.200903175 ↗
49. Determination of local minority carrier diffusion lengths in crystalline silicon from luminescence images10.1063/1.3157200 ↗
50. M. Rudolph, C. Kruse, H. Wolter, B. Wolpensinger, U. Baumann, S. Bräunig, M. Ripke, T. Falcon, R. Brendel, T. Dullweber, PERC+ solar cells with screen-printed dashed Ag front contacts. https://doi.org/10.1063/1.5123861.10.1063/1.5123861 ↗