Influence of LiPON thickness on the electro-optical performance of inorganic all-solid-state electrochromic devices
Source abstract
Abstract
Amorphous lithium phosphorus oxynitride (LiPON) films of various thicknesses were prepared by radio frequency (RF) magnetron sputtering as an electrolyte layer for inorganic all-solid-state electrochromic devices.The ionic conductivity of LiPON films measured by electrochemical impedance spectroscopy was all approximately 10 −6 S/cm, and the average optical transmittance characterized by UV–Vis spectroscopy was over 80%, indicating that the prepared LiPON films were suitable for electrochromic applications. Monoclinic electrochromic devices (ECDs) (ITO/NiO x/LiPON/WO 3 /ITO) with different LiPON thicknesses were fabricated and studied. It was found that the electro-optical properties of the ECDs could be significantly affected by the thickness and surface roughness of LiPON films. The ECDs demonstrated the best combination of optical contrast (68.4% at 560 nm), switching time (27s), and cycling stability (optical modulation degradation of 6.93% for 200 cycles) when the LiPON thickness was 450 nm. The above results not only shed lights on improving the interfacial properties of solid electrolytes, but also give directions for the performance enhancement of inorganic all-solid electrochromic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Recent advances in electrochromics for smart windows applications10.1016/S0038-092X(98)00074-7 ↗
2. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
3. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
4. Investigations of optical and surface properties of Ag single thin film coating as semitransparent heat reflective mirror10.1515/msp-2016-0102 ↗
5. Next-generation multifunctional electrochromic devices10.1021/acs.accounts.6b00183 ↗
6. Electrochromic displays: the new black10.1038/nmat2282 ↗
7. Electrochromic displays based on WO3
8. Novel electrochromic materials based on chalcogenoviologens for smart windows, E-price tag and flexible display with improved reversibility and stability10.1016/j.cej.2021.130057 ↗
9. Electrodeposition of WO3 nanostructured thin films for electrochromic and H2S gas sensor applications10.1016/j.jallcom.2017.05.122 ↗
10. An investigation into the use of electrochromic polymers in optical fibre gas sensors10.1016/S0925-4005(00)00723-1 ↗
11. Electrochromic emissivity modulator for spacecraft thermal management10.1016/j.solmat.2009.02.025 ↗
12. Electrochromic devices for satellite thermal control10.1063/1.2169181 ↗
13. Electrochromic materials and devices: fundamentals and nanostructuring approaches
14. Influence of Ag incorporation on the structural, optical and electrical properties of ITO/Ag/ITO multilayers for inorganic all-solid-state electrochromic devices
15. Recent progress in electrolyte development and design strategies for next-generation potassium-ion batteries10.1002/batt.202100029 ↗
16. Bio and non-bio materials-based quasi-solid state electrolytes in DSSC: a review10.1002/er.7541 ↗
17. All-inorganic solid-state electrochromic devices: a review10.1007/s10008-016-3408-z ↗
18. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
19. The role of interface between LiPON solid electrolyte and electrode in inorganic monolithic electrochromic devices10.1016/j.electacta.2017.12.020 ↗
20. All inorganic thin film electrochromic device using LiPON as the ion conductor10.1016/j.solmat.2015.06.052 ↗
21. Interface Stability in solid-state batteries10.1021/acs.chemmater.5b04082 ↗
22. Electro-optical performance of inorganic monolithic electrochromic device with a pulsed DC sputtered LixMgyN ion conductor10.1007/s10008-017-3742-9 ↗
23. Effect of high temperature LiPON electrolyte in all solid state batteries10.1016/j.ssi.2019.03.023 ↗
24. Improved performance of all-solid-state lithium batteries using LiPON electrolyte prepared with Li-rich sputtering target10.1016/j.ssi.2018.07.011 ↗
25. All solid-state thin-film lithium-ion battery with Ti/ZnO/LiPON/LiMn2O4/Ti structure fabricated by magnetron sputtering10.1016/j.matlet.2017.12.131 ↗
26. Electrical characterization of ultrathin RF-sputtered LiPON layers for nanoscale batteries10.1021/acsami.5b12500 ↗
27. LiPON thin films with high nitrogen content for application in lithium batteries and electrochromic devices prepared by RF magnetron sputtering10.1016/j.ssi.2015.09.022 ↗
28. Ultra-thin LiPON films – fundamental properties and application in solid state thin film model batteries10.1016/j.jpowsour.2014.10.202 ↗
29. Enhanced electrochromic performance on anodic nickel oxide inorganic device via lithium and aluminum co-doping10.1016/j.jallcom.2019.153365 ↗
30. High-performance electrochromic WO3 film driven by controllable crystalline structure and its all-solid-state device10.1016/j.solmat.2021.111564 ↗
31. Electrochemical studies of silicon nitride electron blocking layer for all-solid-state inorganic electrochromic device10.1016/j.electacta.2017.08.177 ↗
32. LiNbO3 thin films for all-solid-state electrochromic devices10.1016/j.optmat.2018.05.062 ↗
33. Properties of NiOx and its influence upon all-thin-film ITO/NiOx/LiTaO3/WO3/ITO electrochromic devices prepared by magnetron sputtering10.1016/j.vacuum.2014.09.007 ↗
34. Thickness dependent surface roughness of sputtered Li2.5TaOx ion conductor and its effect on electro-optical performance of inorganic monolithic electrochromic device10.1016/j.solmat.2017.12.027 ↗
35. High performance all-solid-state electrochromic device based on LixNiOy layer with gradient Li distribution10.1016/j.electacta.2019.05.125 ↗
36. All-thin-film inorganic complementary electrochromic devices with the novel self-aligned lithium-rich ion conductor
37. Effect of independently controllable electrolyte ion content on the performance of all-solid-state electrochromic devices10.1016/j.cej.2020.125628 ↗
38. Inorganic all-solid-state electrochromic devices with reversible color change between yellow-green and emerald green10.1039/D0CC04129G ↗
39. All solid state electrochromic devices based on the LiF electrolyte10.1039/D0CC00697A ↗
40. Lithiation of WO3 films by evaporation method for all-solid-state electrochromic devices10.1016/j.electacta.2020.136817 ↗
41. Effect of the thicknesses of the Al2SiO5 ion conductor on the opto-electrical properties for all-solid electrochromic devices10.1016/j.ceramint.2022.07.068 ↗
42. High performance and excellent stability of all-solid-state electrochromic devices based on a Li1.85AlOz ion conducting layer10.1021/acssuschemeng.9b04501 ↗
43. Sandwich structured electrolyte of high sputtering efficiency for all-solid-state electrochromic devices by optical design10.15541/jim20200633 ↗
44. A Review on lithium phosphorus oxynitride10.1021/acs.jpcc.0c10001 ↗
45. Effect of the WO3/LiPON Solid electrolyte interface on the performance of all thin film inorganic electrochromic devices
46. Chemical and microstructural modifications in LiPON thin films exposed to atmospheric humidity10.1016/j.ssi.2011.01.001 ↗
47. Electrochemical impedance spectroscopy and its applications10.1007/0-306-46916-2_2 ↗
48. Equivalent circuit analogs
49. Radio-frequency magnetron sputtering power effect on the ionic conductivities of LiPON films10.1149/1.1420926 ↗
50. Thorough study of the local structure of LiPON thin films to better understand the influence of a solder-reflow type thermal treatment on their performances10.1016/j.ssi.2011.11.009 ↗
51. Hole doping in Al-containing nickel oxide materials to improve electrochromic performance10.1021/am302097b ↗
52. Charge-transfer kinetics and cyclic properties of inorganic all-solid-state electrochromic device with remarkably improved optical memory10.1016/j.solmat.2017.09.012 ↗
53. Nanoporous nickel oxide thin films and its improved electrochromic performance: effect of thickness10.1016/j.apsusc.2010.10.037 ↗
54. Thickness-dependent microstructural and electrochromic properties of sputter-deposited Ni oxide films10.1116/1.1487871 ↗
55. Thickness-dependent electrochromic properties of solution thermolyzed tungsten oxide thin films10.1016/S0927-0248(99)00079-3 ↗
56. Electrochromic characteristics of radio frequency plasma sputtered WO3 thin films onto flexible polyethylene terephthalate substrates10.1016/j.tsf.2017.05.009 ↗
57. Electrochromic coatings–applications and manufacturing issues10.1016/S0040-6090(98)01429-1 ↗
58. Life-cycling and uncovering cation-trapping evidence of a monolithic inorganic electrochromic device: glass/ITO/WO3/LiTaO3/NiO/ITO10.1039/C8NR02267D ↗
59. Lithium trapping as a degradation mechanism of the electrochromic properties of all-solid-state WO3//NiO devices10.1039/C8TC01372A ↗