Preparation and photothermal conversion performance of carbon-silica nanocomposite films for spectrally selective solar absorbers
Source abstract
Abstract
Abstract A one-step preparation of carbon and dielectric composites with a skeleton-skin structure by sol–gel strategy was proposed in this study. General strategies and comprehensive view on recent knowledge regarding nanocomposites were presented herein. Considering carbon-silica (C–SiO2) composite films as the model system, the insights into the mechanism of wet chemistry in sol were expounded in detail. The structure and crystallization process of nano carbon after annealing process were investigated, revealing that the average sp2 cluster size of nano carbon was in the range from 0.64 to 0.71 nm. The prepared composite films consisted of carbon-covered SiO2 skeleton with intimate interfaces. The film was found to possess excellent adjustable electrical and optical properties, benefited from the rugged composite structure containing nano carbon. With proper heat treatment, the film exhibited the related properties of a solar-selective absorbent material and corresponding low resistivity (about 10−2 Ω cm−1). Thus it can act as a potential candidate for conductive coating. The related simulation analysis concluded that the material consisted of a skeleton-skin structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Developments in the synthesis of flat plate solar selective absorber materials via sol-gel methods: a review10.1016/j.rser.2014.04.062 ↗
2. Surface passivation of silicon solar cells using plasma-enhanced chemical-vapor-deposited SiN films and thin thermal SiO2/plasma SiN stacks10.1088/0268-1242/16/3/308 ↗
3. The revival of thermal utilization from the Sun: interfacial solar vapor generation10.1093/nsr/nwz030 ↗
4. Investigating the collector efficiency of silver nanofluids based direct absorption solar collectors10.1016/j.apenergy.2016.08.054 ↗
5. A comprehensive review of parabolic trough solar collectors equipped with turbulators and numerical evaluation of hydrothermal performance of a novel model
6. Enhanced heat capacity of binary nitrate eutectic salt-silica nanofluid for solar energy storage10.1016/j.solmat.2018.12.019 ↗
7. Photovoltaic thermal module and solar thermal collector connected in series to produce electricity and high-grade heat simultaneously10.1016/j.apenergy.2019.114380 ↗
8. Form-stable paraffin/graphene aerogel/copper foam composite phase change material for solar energy conversion and storage10.1016/j.solmat.2021.111083 ↗
9. A flexible thin-film membrane with broadband Ag@TiO2 nanoparticle for high-efficiency solar evaporation enhancement10.1016/j.energy.2017.07.180 ↗
10. Energy-matrices, exergy, economic, environmental, exergoeconomic, enviroeconomic, and heat transfer (6E/HT) analysis of two passive/active solar still water desalination nearly 4000m: altitude concept10.1016/j.jclepro.2020.121243 ↗
11. Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation10.1126/sciadv.1501227 ↗
12. 3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination10.1038/nphoton.2016.75 ↗
13. Transparent silicon carbide/tunnel SiO2 passivation for c‐Si solar cell front side: enabling Jsc> 42 mA/cm2 and iVoc of 742 mV10.1002/pip.3244 ↗
14. Solution-Doped polysilicon passivating contacts for silicon solar cells10.1021/acsami.0c22127 ↗
15. Selective solar absorbers10.1615/AnnualRevHeatTransfer.2012004119 ↗
16. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
17. Enhanced thermal stability of W‐Ni‐Al2O3 cermet‐based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
18. Optical design and co-sputtering preparation of high performance Mo-SiO2 cermet solar selective absorbing coating10.1016/j.apsusc.2013.04.142 ↗
19. Direct current reactive sputtering Cr-Cr2O3 cermet solar selective surfaces for solar hot water applications10.1016/j.tsf.2008.09.082 ↗
20. Spectral properties and thermal stability of solar selective absorbing AlNi-Al2O3 cermet coating10.1016/j.solener.2013.07.012 ↗
21. Optical properties and thermal stability of solar selective absorbers based on Co-Al2O3 cermets10.1016/j.cjph.2017.02.015 ↗
22. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
23. Optical properties and thermal stability evaluation of solar absorbers enhanced by nanostructured selective coating films10.1016/j.powtec.2020.09.040 ↗
24. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
25. Coatings for concentrating solar systems-A review10.1016/j.rser.2015.01.015 ↗
26. Review of sol-gel derived mixed metal oxide thin film coatings with the addition of carbon materials for selective surface applications10.1166/jap.2014.1131 ↗
27. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol-gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
28. Sol-gel derived solar selective coatings on SS 321 substrates for solar thermal applications10.1016/j.tsf.2015.12.002 ↗
29. SiC-TiC nanocomposite for bulk solar absorbers applications: effect of density and surface roughness on the optical properties10.1016/j.solmat.2018.11.018 ↗
30. Novel black selective coating for tubular solar absorbers based on a sol-gel method10.1016/j.solener.2013.05.009 ↗
31. Nanocomposites derived from silica and carbon for low temperature photothermal conversion10.1016/j.tsf.2013.10.111 ↗
32. ZnO doped single wall carbon nanotube as an active medium for gas sensor and solar absorber10.1007/s10854-018-0276-6 ↗
33. Electrophoretically deposited carbon nanotube spectrally selective solar absorbers10.1016/j.solmat.2015.10.016 ↗
34. Carbon nanotube-based tandem absorber with tunable spectral selectivity: transition from near-perfect blackbody absorber to solar selective absorber10.1002/adma.201305070 ↗
35. Solar photothermal disinfection using broadband-light absorbing gold nanoparticles and carbon black10.1021/acs.est.7b04442 ↗
36. Black-pigmented polypropylene materials for solar thermal absorbers-effect of carbon black concentration on morphology and performance properties10.1016/j.solener.2014.09.024 ↗
37. Silica-carbon nanocomposites-a new concept for the design of solar absorbers10.1002/1616-3028(200203)12:3<197::AID-ADFM197>3.0.CO;2-A ↗
38. A one-step method to prepare carbon and dielectric composited films featuring a skeleton-skin structure10.1016/j.carbon.2015.07.013 ↗
39. Double-layer interactions between self-assembled monolayers of ω-mercaptoundecanoic acid on gold surfaces10.1021/la971296y ↗
40. Understanding of assembly phenomena by aromatic- aromatic interactions: benzene dimer and the substituted systems10.1021/jp068635t ↗
41. Nomenclature of sp2 carbon nanoforms10.1016/j.carbon.2011.11.002 ↗
42. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
43. Electrical behavior of polypropylene/multiwalled carbon nanotube nanocomposites with low percolation threshold10.1016/j.scriptamat.2007.05.035 ↗
44. Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion