Exploring the efficiency limiting parameters trade-off at rear surface in passivated emitter rear contact (PERC) silicon solar cells
Source abstract
Abstract
Abstract In recent years, there is a growing interest in reducing the various losses occurring at the rear surface of passivated emitter and rear contact (PERC) silicon solar cells through process optimization including chemical polishing, dielectric passivation and contact geometry etc. to realize the possible improvements in power conversion efficiency. In this contribution, a detailed investigation on recombination and resistive losses at rear surface of PERC solar cells using advanced imaging techniques for spatial distribution and allied characterization approaches are performed for better understanding of loss mechanisms and possible routes for their mitigation. Our analysis identifies that spreading resistance (Rspr) and reverse saturation current density due to first diode (J01) are the two key parameters in quantifying the efficiency improvement in PERC solar cells. For rear dielectric opening of 45 μm, optimized circular contact geometry was found to exhibit lower Rspr, as well as J01, when compared with the linear scheme. Our calculation also suggests an additional possible improvement of absolute 1.29% in power conversion efficiency through appropriate selection of starting wafer resistivity and improved passivation uniformity across the solar cell area.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. 2020
2. The passivated emitter and rear cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
3. Development of PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
4. Colville
5. Temperature coefficients and operating temperature verification for passivated emitter and rear cell bifacial silicon solar module
6. Osborne
7. Pathway towards 24% efficiency for fully screen-printed passivated emitter and rear contact solar cells10.1088/1361-6463/abe900 ↗
8. Hartmannsgruberm
9. Application of SiO2 passivation technique in mass production of silicon solar cells10.1016/j.solmat.2019.01.038 ↗
10. Efficient boron doping in the back surface field of crystalline silicon solar cells via alloyed-aluminum–boron paste10.1109/LED.2012.2186114 ↗
11. High-precision alignment procedures for patterning processes in solar cell production10.1002/pip.3218 ↗
12. Stability of Al2O3 and Al2O3/a-SiNx: H stacks for surface passivation of crystalline silicon10.1063/1.3264572 ↗
13. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
14. Enhanced Si passivation and PERC solar cell efficiency by atomic layer deposited aluminum oxide with two-step post annealing10.1186/s11671-019-2969-z ↗
15. Application of silicon oxide on high efficiency monocrystalline silicon PERC solar cells10.3390/en12061168 ↗
16. Recombination and optical properties of wet chemically polished thermal oxide passivated Si surfaces10.1109/JPHOTOV.2012.2230686 ↗
17. “SiO2 surface passivation layers – a key technology for silicon solar cells”10.1016/j.solmat.2018.04.029 ↗
18. 20.8% industrial PERC solar cell: ALD Al2O3 rear surface passivation, efficiency loss mechanisms analysis and roadmap to 24%10.1016/j.solmat.2016.11.018 ↗
19. “Improved Al2O3/SiNx and SiO2/SiNx stack passivation layer structure PERC sc‐silicon solar cells on mass production line”10.1002/er.6201 ↗
20. Chunduri · 2019 · 43
21. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗
22. Impact of rear side roughness on optical and electrical properties of a high-efficiency solar cell10.1016/j.egypro.2015.07.118 ↗
23. How much rear side polishing is required? A study on the impact of rear side polishing in PERC solar cells
24. Large-area MACE Si nano-inverted-pyramids for PERC solar cell application10.1016/j.solener.2019.06.015 ↗
25. Development of rear side polishing adapted to advanced solar cell concepts
26. Wet chemical polishing for industrial type PERC solar cells10.1016/j.egypro.2013.07.273 ↗
27. Screen printed rear surface reflector for light trapping in crystalline silicon solar cells
28. High efficiency large-area rear passivated silicon solar cells with local Al-BSF and screen-printed contacts10.1109/JPHOTOV.2011.2163151 ↗
29. Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells10.1016/j.solmat.2020.110712 ↗
30. Light trapping in isotextured silicon wafers10.1109/JPHOTOV.2016.2621347 ↗
31. Influence of surface structure on the performance of mono-like Si PERC solar cell10.1016/j.mssp.2021.105662 ↗
32. Basu · 2012 · 644730
33. Investigation of different contact geometries for partial rear metal contact of high-efficiency silicon solar cells10.1088/0022-3727/48/46/465106 ↗
34. “Analytical model for the diode saturation current of point‐contacted solar cells”10.1002/pip.637 ↗
35. Fischer · 2003
36. Analytical solution for the photocurrent of solar cells with internal reflection10.1063/1.3677998 ↗
37. Recombination at textured silicon surfaces passivated with silicon dioxide10.1063/1.3153979 ↗
38. Effect of air ambient on surface recombination and determination of diffusion length in silicon wafer using photocurrent generation method10.1016/j.solener.2011.03.005 ↗
39. Impact of local back-surface-field thickness on open-circuit voltage in PERC solar cells: an experimental study applying ANOVA to determine critical sample size necessary to differentiate mean LBSF values with statistical significance10.1109/JPHOTOV.2020.3026978 ↗
40. Impact of local back-surface-field thickness variation on performance of PERC solar cells10.1109/JPHOTOV.2021.3068603 ↗
41. Nondestructive local analysis of current-voltage characteristics of solar cells by lock-in thermography10.1016/j.solmat.2011.05.049 ↗
42. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
43. Dong · 2014
44. Front Grid Design for Plated Contact Solar Cells
45. “Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts”10.1016/j.solmat.2018.12.026 ↗