~23% rear side poly-Si/SiO2 passivated silicon solar cell with optimized ion-implanted boron emitter and screen-printed contacts
Source abstract
Abstract
We report on the understanding and optimization of ion-implanted boron emitters in combination with screen-printed contacts to produce very low recombination current density and high-efficiency cells with rear poly-Si/SiO 2 passivated contact. Due to high bulk lifetime in n-base Si and very low recombination in the rear-side n + passivated contact, recombination in the emitter limits the efficiency potential of manufacturable single-side passivated contact cells. Emitter recombination is governed by recombination under metal contacts ( J 0e,metal) and in the passivated regions in between ( J 0e,pass ). Emitter profile engineering and dielectric passivation can lower the J 0e,pass while paste chemistry and firing conditions can reduce J 0e,metal by altering the extent of screen-printing induced emitter surface etching and the percentage of unetched dielectric islands under the metal contacts. We optimized implanted boron profiles, surface concentration and passivation, and junction depth in the sheet resistance range of 48-200 Ω/□ and achieved very low J 0e,pass (<15 fA/cm 2) for textured boron emitters with R sheet ≥ 140 Ω/□. Additionally, screen-printing paste and firing optimization reduced J 0e,metal from 1172 to 707 fA/cm 2 on 170 Ω/□ boron emitter by virtually eliminating emitter surface etching and creating distributed local contacts with unetched dielectric islands (~40% area coverage) underneath the grid lines. This resulted in very low total metallized J 0e of 30 fA/cm 2 with 3% metal coverage. Our device modeling showed the optimum boron sheet resistance is in the range of 120-170 Ω/□. The simulated results were validated by fabricating fully screen-printed 100 cm 2 22.9% efficient bifacial cell with n + poly-Si/SiO 2 passivated rear contact.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
2. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
3. Hahn · 2010
4. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
5. Extending the limits of screen-printed metallization of phosphorus- and boron-doped surfaces10.1016/j.solmat.2016.05.064 ↗
6. High-Throughput ion-implantation for low-cost high-efficiency silicon solar cells10.1016/j.egypro.2012.02.002 ↗
7. N-type silicon solar cells with implanted emitter
8. Very low emitter saturation current densities on ion implanted boron emitters
9. Ion-implant doped large-area n-type Czochralski high-efficiency industrial solar cells
10. High throughput ion-implantation for silicon solar cells10.1016/j.egypro.2012.07.039 ↗
11. Advantages of ion-implantation for solar cells
12. Fabrication of high-efficiency silicon solar cells by ion implant process10.1016/S1452-3981(23)12832-X ↗
13. Boron implanted junction with in situ oxide passivation and application to p-PERT bifacial silicon solar cell10.1002/pssa.201800414 ↗
14. 2019
15. Measurement of the emitter saturation current by a contactless photoconductivity decay method
16. Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells10.1016/j.solmat.2020.110519 ↗
17. Ion-implanted and screen-printed large area 19.6% efficient n-type bifacial Si solar cell
18. Screen printed, large area bifacial N-type back junction silicon solar cells with selective phosphorus front surface field and boron doped poly-Si/SiOx passivated rear emitter10.1063/1.5059559 ↗
19. Contact resistance: its measurement and relative importance to power loss in a solar cell, Electron Devices10.1109/T-ED.1984.21584 ↗
20. Doping profile Analysis in Si by electrochemical capacitance‐voltage measurements10.1149/1.2044101 ↗
21. Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact10.1016/j.solmat.2020.110585 ↗
22. Excellent boron emitter passivation for high-efficiency Si wafer solar cells using AlOx/SiNx dielectric stacks deposited in an industrial inline plasma reactor10.1002/pip.1259 ↗
23. Boron emitter passivation with Al2O3 and Al2O3/SiNx stacks using ALD Al2O310.1109/JPHOTOV.2012.2226145 ↗
24. Emitter recombination current densities of boron emitters with silver/aluminum pastes
25. 2019
26. The oxidation rate dependence of oxidation‐enhanced diffusion of boron and phosphorus in silicon10.1149/1.2127564 ↗
27. Input parameters for the simulation of silicon solar cells in 201410.1109/JPHOTOV.2015.2430016 ↗
28. Metallization‒induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
29. Two-dimensional modeling of the metallization-induced recombination losses of screen-printed solar cells10.1109/JPHOTOV.2014.2365453 ↗
30. formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
31. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
32. Microstructural characterization and current conduction mechanisms of front-side contact of n-type crystalline Si solar cells with Ag/Al pastes10.1063/1.4921544 ↗
33. Microstructural comparison of silicon solar cells' front-side Ag contact and the evolution of current conduction mechanisms
34. Screen printing metallization of boron emitters10.1002/pip.933 ↗
35. Understanding metal induced recombination losses in silicon solar cells with screen printed silver contacts10.1016/j.egypro.2016.10.077 ↗
36. Metallization and firing process impact on VOC—a simulation study
37. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
38. Large area 21.6% efficiency front junction N-type cell with screen printed tunnel oxide passivated poly-Si rear contact
39. Bassi · 2014
40. Industrial screen-printed n-PERT-RJ solar cells: efficiencies beyond 22% and open-circuit voltages approaching 700 mV10.1109/JPHOTOV.2019.2919117 ↗
41. Feldmann · 2019
42. Industrial TOPCon solar cells realized by a PECVD tube process