Shape-stabilized polyethylene glycol composite phase change materials based on dendritic mesoporous silica sphere support for thermal energy storage
Source abstract
Abstract
With the rapid development of renewable energy sources, energy storage technology based on solid-liquid phase change materials (SL-PCM) has received widespread attention due to its high-energy density, low cost and environmental friendliness. In this study, a simple synthesis procedure of dendritic silica microspheres (DMNSiO 2) was proposed by adopting a novel multiblock polyurethane surfactant as templating agent, and DMNSiO 2/PEG shape-stabilized phase change materials were prepared through vacuum impregnation using DMNSiO 2 as the mesoporous matrix. The DMNSiO 2 exhibited an inter-connective and uniformly distributed pore structure, which not only encapsulated and shaped the PEG material in a homogeneous manner, but also provided well-defined heat transfer channels. The optimal DMNSiO 2 for supporting PEG had a specific surface area of 876.4 m 2 g −1, an average pore size of 8.39 nm and a maximum pore volume of 1.33 cm 3 g −1. DMNSiO 2/PEG-4 exhibited an excellent phase-change performance with superior phase change enthalpy of 151.54 J/g, which remained almost constant in the thermal cycling experiments with500 times of DSC scanning, The maximum encapsulation rate of DMNSiO 2/PEG is close to 75 %, and the thermal conductivity of DMNSiO 2/PEG composites were all improved comparing to pure PEG (28–57 %), which demonstrate their excellent thermal storage capability and good heat conduction properties. It has a broad application prospect in heat preservation building materials, solar energy storage, battery, and other thermal management fields.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Thermophysical properties of some organic phase change materials for latent heat storage. A review10.1016/j.solener.2014.05.001 ↗
2. Latent heat thermal energy storage systems with solid–liquid phase change materials: a review10.1002/adem.201700753 ↗
3. Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–A review10.1016/j.apenergy.2018.11.017 ↗
4. Phase change composites based on double-shell microcapsules with high latent heat and low leakage rate for thermal energy storage and temperature regulation10.1016/j.est.2022.105428 ↗
5. Process and performance of palmitic acid @silica phase-change microcapsules using chemical precipitation method
6. Properties and applications of shape-stabilized phase change energy storage materials based on porous material support—a review
7. Fabrication and thermal performance of 3d copper-mesh-sintered foam/paraffin phase change materials for solar thermal energy storage10.3390/pr10050897 ↗
8. Mesoporous silica and organosilica nanoparticles: physical chemistry, biosafety, delivery strategies, and biomedical applications10.1002/adhm.201700831 ↗
9. Facile fabrication of silica–polymer–graphene collaborative nanostructure-based hybrid materials with high conductivity and robust mechanical performance10.1039/C5RA02126J ↗
10. Shape-stabilized PEGylated silica aerogel-composite as an energy saving building material10.1021/acs.iecr.3c02373 ↗
11. Synthesis and nanoencapsulation of poly(ethylene glycol)-distearates phase change materials for latent heat storage and release10.1021/acsaem.0c00895 ↗
12. Highly thermally conductive and shape-stabilized phase change materials with desirable solar/electric-to-thermal conversion performance based on high-modulus graphite/PVA foam10.1016/j.cej.2024.156509 ↗
13. High thermally conductive shape-stabilized phase change composites with dual-aligned carbon nanofiber scaffolds10.1016/j.est.2024.110739 ↗
14. Shape-stabilized phase change materials based on polyvinyl alcohol/carboxylated carbon nanotubes/graphene hybrid aerogels for efficient solar-thermal conversion and thermal camouflage10.1016/j.solmat.2024.112973 ↗
15. Flame-retardant shape-stabilized phase change composites with superior solar-to-thermal conversion10.1016/j.solmat.2024.112996 ↗
16. Multielement synergetic effect of boron nitride and multiwalled carbon nanotubes for the fabrication of novel shape-stabilized phase-change composites with enhanced thermal conductivity10.1021/acsami.0c11002 ↗
17. Polyethylene glycol-impregnated carbon quantum dots-phenolic phase change composites for highly efficient thermal energy storage10.1016/j.carbon.2024.118840 ↗
18. Stable and reliable PEG/TiO2 phase change composite with enhanced thermal conductivity based on a facile sol-gel method without deionized water10.1016/j.est.2024.111705 ↗
19. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)10.1016/j.solmat.2011.08.020 ↗
20. Preparation of aerogel-like silica foam with the hollow-sphere-based 3D network skeleton by the cast-in situ method and ambient pressure drying10.1021/acs.nanolett.2c02768 ↗
21. Phase change material thermal energy storage systems for cooling applications in buildings: a review10.1016/j.rser.2019.109579 ↗