journal article·2024-10

Experimental analysis on improving heat storage efficiency of high-temperature packed bed system using spherical capsules filled with MgCl2–KCl–NaCl/Al2O3 nanoparticles composite phase change material

Dongmei Han, Xibo He, Yicheng Hou, Boxi Geng, Hao Zhang, Bachirou Guene Lougou, Yong Shuai

Publisher page

Abstract

While thermal energy storage (TES) systems are becoming crucial to the stable operation of solar power plants, molten salt packed bed thermal energy storage (PBTES) systems attracted widespread attention due to their wide operating temperature range and low cost. However, achieving high-efficiency thermal storage systems is still a datum challenge to meet the higher energy demand, as well as sustainable development and utilization of renewable energy systems. This study developed spherical capsules employing nanocomposite salts (MgCl 2–KCl–NaCl/Al 2O 3 nanoparticles) as composite phase change materials to experimentally study the heat storage process of a high-temperature PBTES prototype experimental system. Also, the heat storage performance of the PBTES system under different operating conditions is further investigated. The results showed that the nanocomposite salt gradually melted along the flow direction of the heat transfer fluid by exhibiting three-stage characteristics including solid phase sensible heat, phase change latent heat, and liquid phase sensible heat. Also, the temperature difference inside and outside the capsules showed the characteristics of peak-trough-peak. The PBTES system reached a heat storage density of 1290.51 MJ m −3 at a thermal efficiency of 86.95 %. The average heat storage rate increased by 49.55 % and the heat storage time was shortened by 29.67 % when the blower speed was increased from 800 r·min −1 to 1200 r·min −1. The experimental results implied that the PBTES system encapsulating nanocomposite salts has excellent thermal performance. This study demonstrated solving the problems of insufficient thermal energy supply in time or space and improving energy utilization could result in a high-efficiency thermal storage system.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. How population and energy price affect China's environmental pollution?10.1016/j.enpol.2019.02.020 ↗
2. Incorporating life cycle assessments into building project decision-making: an energy consumption and CO2 emission perspective10.1016/j.energy.2011.02.046 ↗
3. Capacity optimization and economic analysis of PV-hydrogen hybrid systems with physical solar power curve modeling10.1016/j.enconman.2023.117128 ↗
4. A comprehensive review on the development of sustainable energy strategy and implementation in China10.1109/TSTE.2010.2051464 ↗
5. Solar-Powered solutions for the water and energy shortage problem: the case study of nahr el bared10.48084/etasr.5858 ↗
6. Solar energy-A look into power generation, challenges, and a solar-powered future10.1002/er.4252 ↗
7. Theoretical investigation on inverse identification of spectral properties of paraffin phase change materials based on multi-thickness model10.1016/j.solener.2021.07.006 ↗
8. Selection of iron-based oxygen carriers for two-step solar thermochemical splitting of carbon dioxide10.1016/j.enconman.2023.116772 ↗
9. Solar power technology for electricity generation: a critical review10.1002/ese3.239 ↗
10. Solar energy and wind power supply supported by storage technology: a review10.1016/j.seta.2019.05.013 ↗
11. Study of thermophysical properties of chloride salts doped with CuO nanoparticles for solar thermal energy storage10.1016/j.solmat.2021.111432 ↗
12. Thermal energy storage systems for concentrated solar power plants10.1016/j.rser.2017.03.139 ↗
13. On thermal energy storage systems and applications in buildings10.1016/S0378-7788(01)00126-8 ↗
14. Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques10.1016/S0196-8904(98)00025-9 ↗
15. Phase change materials for thermal energy storage applications in greenhouses: a review
16. Molten salt storage for power generation10.1002/cite.202000137 ↗
17. Progress in research and development of molten chloride salt technology for next generation concentrated solar power plants10.1016/j.eng.2020.06.027 ↗
18. Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: lessons learnt and recommendations for its design, start-up and operation10.1016/j.renene.2018.01.026 ↗
19. Simultaneous estimation of thermal and optical properties of molten salt based on improved colliding bodies optimization10.1016/j.renene.2023.119157 ↗
20. Research on dimensionless structure size of coil heat exchanger in heat discharging process of molten salt single tank heat storage system10.1016/j.applthermaleng.2022.119367 ↗
21. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
22. Thermal storage in a MW scale. Molten salt solar thermal pilot facility: plant description and commissioning experiences10.1016/j.renene.2016.07.053 ↗
23. Performance assessment of an oil-based packed bed thermal energy storage unit in a demonstration concentrated solar power plant10.1016/j.energy.2020.119378 ↗
24. Experimental and numerical study on the performance of a new high-temperature packed-bed thermal energy storage system with macroencapsulation of molten salt phase change material10.1016/j.apenergy.2018.03.156 ↗
25. Comparative research of heat discharging characteristic of single tank molten salt thermal energy storage system10.1016/j.ijthermalsci.2020.106704 ↗
26. Effect of operating parameters on thermal performance of molten salt packed-bed thermocline thermal energy storage system for concentrating solar power plants10.1016/j.ijthermalsci.2017.07.004 ↗
27. Performance investigation of single-tank thermocline storage systems for CSP plants10.1016/j.solener.2017.02.012 ↗
28. Cyclic thermal performance analysis of a traditional Single-Layered and of a novel Multi-Layered Packed-Bed molten salt Thermocline Tank10.1016/j.renene.2017.11.038 ↗
29. Experimental study on thermal performance of a novel medium-high temperature packed-bed latent heat storage system containing binary nitrate10.1016/j.apenergy.2021.118433 ↗
30. Experimental investigation and thermodynamic modeling of an innovative molten salt for thermal energy storage (TES)10.1016/j.apenergy.2017.12.069 ↗
31. Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites10.1016/j.apenergy.2009.04.027 ↗
32. Optimization design and performance investigation on the cascaded packed-bed thermal energy storage system with spherical capsules10.1016/j.applthermaleng.2023.120241 ↗
33. Numerical and experimental studies on heat transfer characteristics of thermal energy storage system packed with molten salt PCM capsules10.1016/j.applthermaleng.2015.07.056 ↗
34. Massive grid-scale energy storage for next-generation concentrated solar power: a review of the potential emerging concepts10.1016/j.rser.2023.113633 ↗
35. Molten chloride salt technology for next-generation CSP plants: compatibility of Fe-based alloys with purified molten MgCl2-KCl-NaCl salt at 700 °C10.1016/j.apenergy.2022.119708 ↗
36. Numerical and experimental analysis of instability in high temperature packed-bed rock thermal energy storage systems10.1016/j.apenergy.2023.122535 ↗
37. Performance analysis of a packed bed latent heat thermal energy storage with cylindrical-shaped encapsulation10.1002/er.6639 ↗
38. Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage10.1016/j.apenergy.2020.114674 ↗
39. Enhanced corrosion resistance of alloy in molten chloride salts by adding nanoparticles for thermal energy storage applications10.1016/j.est.2023.107172 ↗
40. A review on effect of phase change material encapsulation on the thermal performance of a system10.1016/j.rser.2012.05.037 ↗
41. Systematic review of encapsulation and shape-stabilization of phase change materials10.1016/j.est.2020.101495 ↗
42. Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage10.1016/j.rser.2015.03.038 ↗
43. Excellent corrosion resistance of 316 stainless steel in purified NaCl-MgCl2 eutectic salt at high temperature10.1016/j.corsci.2020.108473 ↗
44. Unconstrained melting heat transfer in a spherical container revisited in the presence of nano-enhanced phase change materials (NePCM)10.1016/j.ijheatmasstransfer.2016.01.013 ↗
45. High emissivity double-layer coating on the flexible aluminum silicate fiber fabric with enhanced interfacial bonding strength and high temperature resistance10.1016/j.jeurceramsoc.2020.09.061 ↗
46. Efficiency analyses of high temperature thermal energy storage systems of rocks only and rock-PCM capsule combination10.1016/j.solener.2017.12.065 ↗
47. Controllable preparation method and thermal properties of composite phase change materials based on starch pore formation10.1016/j.solmat.2023.112255 ↗