journal article·2024-10

Design considerations of CdSe solar cells for indoor applications under white LED illumination

Marwa S. Salem, Ahmed Shaker, Mohamed Okil, Luying Li, Chao Chen, Arwa N. Aledaily, Kawther A. Al-Dhlan, Abdelhalim Zekry

Publisher page

Abstract

This work sheds light on the potential of Cadmium Selenide (CdSe) solar cells for indoor applications. CdSe boasts a wide direct bandgap, high carrier mobility, and a high absorption coefficient, making it an attractive candidate for harnessing ambient indoor light. Our study centers around an experimental solar cell architecture composed of FTO/CdSe/PEDOT:PSS/CuI/ITO, which exhibits a power conversion efficiency (PCE) of 6.00 %. Through a meticulous analysis of the core technological aspects of this cell, we successfully replicate the measured current-voltage characteristics and other experimental data, affirming the validity of our simulation modeling approach. Moving forward, we delve into the design and optimization of CdSe-based solar cells under white LED illumination. We emphasize the pivotal role of a double-hole transport layer (HTL) configuration over a single HTL, with a focus on optimizing the alignment between the HTL/back contact and HTL/absorber interfaces. The strategic incorporation of a heavily doped p-type HTL material, boasting both a deep valence band maximum (VBM) and a shallow conduction band minimum (CBM), is identified as paramount, especially for a deep VBM absorber like CdSe. Adding double HTL materials also facilitates efficient hole collection within the CdSe thin film while mitigating undesirable electron-hole recombination at the critical interface between the hole collection layer and the electrode. The implementation of a double HTL configuration based on CuI/ZnTe:Cu or CuI/BCS significantly enhances performance, resulting in a PCE in the order of 20 % under 200 lux and 2900 K LED illumination. Moreover, we introduce the single HTL design to provide other alternatives for efficiency boosting. Upon increasing the work function of the front contact, it is found that the valence band offset between the HTL and the absorber can be engineered, resulting in a PCE above 21.5 %.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
2. From crystalline to low-cost silicon-based solar cells : a review10.1007/s12633-021-01032-4 ↗
3. Huang · 2020
4. Design of lead-free perovskite solar cell using Zn1-xMgxO as ETL: SCAPS device simulation10.1016/j.ijleo.2021.167306 ↗
5. Materials Optimization for thin-film copper indium gallium selenide (CIGS) solar cell based on distributed braggs reflector10.1016/j.ijleo.2020.165987 ↗
6. New Sb2Se3-based solar cell for achieving high efficiency theoretical modeling10.1007/s11082-023-04797-7 ↗
7. Effect of annealing on the properties of chemical bath deposited nanorods of CdSe thin films10.1002/crat.201200196 ↗
8. Efficient heterojunction thin film CdSe solar cells deposited using thermal evaporation
9. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
10. PHOTOVOL TAlC BEHAVIOUR OF CdSe THIN FILM SOLAR CELLS
11. Rapid thermal evaporation for cadmium selenide thin-film solar cells10.1007/s12200-021-1217-1 ↗
12. Effect of Ag-doping on the structural, optical, electrical and photovoltaic properties of thermally evaporated Cadmium Selenide thin films10.1088/2053-1591/ab6c17 ↗
13. Solvothermal synthesis, deposition and characterization of cadmium selenide (CdSe) thin films by thermal evaporation technique10.1016/j.jcrysgro.2011.09.051 ↗
14. Understanding the physical properties of CdCl2 treated thin CdSe films for solar cell applications10.1016/j.optmat.2019.01.001 ↗
15. Highly Efficient Quantum-Dot-Sensitized Solar Cell Based on Co-Sensitization of CdS/CdSe10.1002/adfm.200800940 ↗
16. Rapid thermal evaporation for cadmium selenide thin-film solar cells10.1007/s12200-021-1217-1 ↗
17. Fabrication and optimization of CdSe solar cells for possible top cell of silicon‐based tandem devices
18. Electrical bias as an alternate method for reproducible measurement of copper indium gallium diselenide (CIGS) photovoltaic modules
19. Performance of III–V solar cells as indoor light energy Harvesters10.1109/JPHOTOV.2015.2487825 ↗
20. New acetylene-bridged 9,10-conjugated anthracene sensitizers: application in outdoor and indoor dye-sensitized solar cells10.1002/aenm.201700032 ↗
21. Ultra-thick semi-crystalline photoactive donor polymer for efficient indoor organic photovoltaics10.1016/j.nanoen.2019.01.061 ↗
22. Comparative performance analysis of photo-supercapacitor based on silicon, dye-sensitized and perovskite solar cells: towards indoor applications10.1016/j.solmat.2022.111966 ↗
23. High-performance large-area blade-coated perovskite solar cells with low ohmic loss for low lighting indoor applications10.1016/j.cej.2022.137164 ↗
24. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
25. Device modeling of efficient PBDB-T : PZT-based all-polymer solar cell : role of band alignment10.3390/polym15040869 ↗
26. An investigation on organic and inorganic materials for hole transport layer in lead-free third-generation solar cell10.1007/s12596-022-01027-3 ↗
27. A brief review of hole transporting materials commonly used in perovskite solar cells10.1007/s12598-020-01691-z ↗
28. Controlled activation of ZnTe:Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
29. Insights into the role of interface modification in performance enhancement of ZnTe:Cu contacted CdTe thin film solar cells10.1016/j.solener.2020.02.083 ↗
30. First-principles investigation on the electronic structures of CdSe x S 1− x and simulation of CdTe solar cell with a CdSe x S 1− x window layer by SCAPS10.1039/D2RA03053E ↗
31. Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells10.1016/j.solmat.2020.110764 ↗
32. Defects signature in VOC characterization of thin-film solar cells10.1016/j.solener.2021.03.017 ↗
33. Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications10.1038/s41560-019-0448-5 ↗
34. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
35. Analysis of heterointerface recombination by Zn1-xMgxO for window layer of Cu(In,Ga)Se2 solar cells10.1016/j.solener.2008.09.003 ↗
36. Enhancement of the work function of indium tin oxide by surface modification using caesium fluoride10.1088/0022-3727/46/47/475102 ↗