Molecular dynamics study on interfacial diffusion characterization of nanoparticle TiO2 and metal Fe in high-temperature molten salt thermal energy storage system
Source abstract
Abstract
Previous experimental studies have found that nanoparticle TiO2 doping into molten salts can mitigate the corrosive effect of molten salts on metals; however, the microscopic mechanism behind this phenomenon has not been fully understood. In this paper, the diffusion characteristics and microstructural features of the interface between nanoparticle TiO2 and metal Fe at high temperatures were simulated by molecular dynamics (MD) method, and an attempt was made to explain the corrosion inhibition mechanism from the microscopic point of view. The results show that when the temperature ranges from 698 to 1298 K, TiO2 and Fe behave in a mutual diffusion way at the interface, where a stable diffusion layer has been formed gradually. As the temperature rises, the diffusion intensifies and the diffusion layer becomes thicker. Moreover, an energy gradient is built up at the interface, indicating that the atoms that are closer to the interface have larger energies. The binding energy at the TiO2/Fe interface increases with the increasing of temperature, and its makes the atoms at the interface undergo the diffusion-remodeling behavior and form new coordination compounds: Ti2Fe, TiFe2, TiFe4, Ti(FeO2)3, Ti8Fe35O64, FeO, etc. This is in general agreement with the observations in experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The effect of humidity, impurities and initial state on the corrosion of carbon and stainless steels in molten HitecXL salt for CSP application10.1016/j.solmat.2017.08.026 ↗
2. Performance and simulation of a stand-alone parabolic trough solar thermal power plant
3. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
4. Molten chloride salt technology for next-generation CSP plants: selection of cold tank structural material utilizing corrosion control at 500° C10.1016/j.solmat.2023.112233 ↗
5. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 C10.1016/j.solmat.2015.08.011 ↗
6. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗
7. Corrosion behaviour of austenitic stainless steels in carbonate melt at 923 K under controlled CO2-O2 environment10.1016/j.corsci.2018.01.031 ↗
8. Corrosion behavior of Cr, Fe and Ni based superalloy in molten NaCl10.1016/S1875-5372(14)60044-8 ↗
9. Electrochemical analysis on the growth of oxide formed on stainless steels in molten carbonate at 650° C10.1016/j.ijhydene.2014.03.207 ↗
10. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies10.1016/j.solmat.2016.05.052 ↗
11. Corrosion of iron–nickel–chromium alloys in high temperature carbonate salt under argon atmosphere10.1016/j.solmat.2023.112317 ↗
12. Optical properties and corrosion resistance of Ti2AlC, Ti3AlC2, and Cr2AlC as candidates for concentrated solar power receivers10.1016/j.solmat.2023.112433 ↗
13. Role of headspace environment for phase change carbonates on the corrosion of stainless steel 316L: high temperature thermal storage cycling in concentrated solar power plants10.1016/j.solmat.2022.112170 ↗
14. Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology10.1016/j.solener.2018.10.083 ↗
15. Corrosion performance of slurry aluminide coatings in molten NaCl–KCl10.1016/j.solmat.2021.110974 ↗
16. Corrosion-resistant thermal spray coatings for low-alloy steel in contact with molten nitrate salts in solar power plants10.1016/j.solmat.2023.112432 ↗
17. Laser-induced carbonization of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications10.1016/j.est.2022.105972 ↗
18. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
19. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
20. Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power10.1016/j.solmat.2019.110172 ↗
21. Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power10.1016/j.solmat.2020.110650 ↗
22. New insights into the heat capacity enhancement of nano-SiO2 doped alkali metal chloride molten salt for thermal energy storage: a molecular dynamics study10.1016/j.est.2023.107015 ↗
23. High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants10.1016/j.renene.2018.07.018 ↗
24. Corrosion aspects of molten nitrate salt-based nanofluids for thermal energy storage applications10.1016/j.solener.2019.07.050 ↗
25. Nanoparticles as a high-temperature anticorrosion additive to molten nitrate salts for concentrated solar power10.1016/j.solmat.2019.110171 ↗
26. Nanofluids based on molten carbonate salts for high-temperature thermal energy storage: thermophysical properties, stability, compatibility and life cycle analysis10.1016/j.solmat.2020.110838 ↗
27. Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: a study under dynamic conditions10.1016/j.renene.2019.06.145 ↗
28. Experimental study on heat storage and corrosion properties of ternary carbonate salt-based ZnO nanofluids for solar thermal energy storage10.1007/s10973-022-11654-4 ↗
29. On the anticorrosion mechanism of molten salts based nanofluids10.1016/j.solmat.2021.111424 ↗
30. Insight into diffusion-rebonding of Nano-Al2O3 on Fe surface in high-temperature thermal energy storage system10.1016/j.apsusc.2020.147249 ↗
31. Effect of SiO2 nanoparticles concentration on the corrosion behaviour of solar salt-based nanofluids for Concentrating Solar Power plants10.1016/j.solmat.2022.111923 ↗
32. Thermalized Drude oscillators with the LAMMPS molecular dynamics simulator10.1021/acs.jcim.5b00612 ↗
33. Interplay between interfacial layer and nanoparticle dispersion in molten salt nanofluid: collective effects on thermophysical property enhancement revealed by molecular dynamics simulations10.1016/j.ijheatmasstransfer.2022.123305 ↗
34. A reactive molecular dynamics simulation study on corrosion behaviors of carbon steel in salt spray10.1016/j.commatsci.2021.111142 ↗
35. On the configurational temperature Nosè–Hoover thermostat10.1016/j.physa.2016.05.008 ↗
36. Computer" experiments" on classical fluids. I. Thermodynamical properties of Lennard-Jones molecules10.1103/PhysRev.159.98 ↗
37. Vibrational and thermoelastic properties of bcc iron from selected EAM potentials10.1016/j.commatsci.2018.05.038 ↗
38. Structural and transport properties of FeO-TiO2-SiO2 systems: insights from molecular dynamics simulations10.1016/j.jnoncrysol.2021.121049 ↗
39. Critical role of surficial activity in the sintering process of TiO2 nanoparticles by molecular dynamics simulation10.1016/j.powtec.2021.117071 ↗
40. Particle migration behavior between TiO2 and magnetite under high-temperature oxidative roasting: an experimental and molecular dynamics study10.1016/j.powtec.2023.118226 ↗
41. Structural and transport properties of FeO-TiO2 system through molecular dynamics simulations10.1016/j.jnoncrysol.2018.04.027 ↗
42. A new self-consistent empirical interatomic potential model for oxides, silicates, and silica-based glasses10.1021/jp0611018 ↗
43. Fan · 2012
44. First-principles DFT study of structural, electronic and optical properties of Cu-doped TiO2 (112) surface for enhanced visible-light photocatalysis10.1016/j.commatsci.2022.111952 ↗
45. First principles study on band gap modulation of TiO2 (112) surface for enhancing optical properties10.1016/j.physb.2023.415579 ↗
46. Computer simulations of the structures of the metallic superlattices Au/Ni and Cu/Ni and their elastic moduli10.1088/0305-4608/16/7/009 ↗
47. Corrigendum to “revisting lennard jones, Morse, and N-M potentials for metals”10.1016/j.commatsci.2022.111206 ↗
48. Phase equilibria in the system ZnO—TiO210.1111/j.1151-2916.1960.tb14326.x ↗
49. Size dependence and phase transition during melting of fcc-Fe nanoparticles: a molecular dynamics simulation10.1016/j.apsusc.2013.03.017 ↗
50. Progress in research and development of molten chloride salt technology for next generation concentrated solar power plants10.1016/j.eng.2020.06.027 ↗
51. Molecular dynamics simulation of diffusion coefficients of naphthalene and 2-naphthol in supercritical carbon dioxide10.1016/S0378-3812(96)03139-1 ↗
52. Strain effects on oxygen transport in tetragonal zirconium dioxide10.1039/c3cp53562b ↗
53. Solid state reaction studies in Fe3O4–TiO2 system by diffusion couple method10.1016/j.jallcom.2013.05.114 ↗
54. Understanding solid phase diffusion-bonding process of Ni (000)/α-Al2O3 (0001) interface
55. Molecular dynamics simulation effect of temperature on binding energies of polyimide-nano a-Al 2 O 3
56. Temperature and concentration dependence of the physical properties and local structures of molten NaCl-KCl-LiCl mixtures10.1016/j.molliq.2016.12.091 ↗
57. Characterization of iron oxides by x-ray absorption at the oxygen K edgeusing a full multiple-scattering approach10.1103/PhysRevB.55.2570 ↗
58. Correlation between Fischer-Tropsch catalytic activity and composition of catalysts10.1186/1752-153X-5-68 ↗
59. Commentary: the Materials Project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
60. One-step synthesis of molten salt nanofluid for thermal energy storage application–a comprehensive analysis on thermophysical property, corrosion behavior, and economic benefit10.1016/j.est.2021.102278 ↗
61. Investigation of thermal transport behavior in YSZ and LZ/YSZ coupled system between 1273 and 1473 K using molecular dynamics simulation10.1016/j.molliq.2017.09.001 ↗
62. Mechanical and thermal transport properties of graphene with defects10.1063/1.3615290 ↗
63. Nanoparticle-based anticorrosion coatings for molten salts applications10.1016/j.est.2022.106374 ↗