The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber
Source abstract
Abstract
The absorbers of kesterite Cu 2ZnSn(S,Se) 4 (CZTSSe) that have undergone rapid thermal process (RTP) selenization typically exhibit a double-layer structure, with a fine crystal layer at the bottom, which degrades the performance of devices. We propose an efficient strategy for actively constructing the double-layer absorber to improve the quality of the small grains in the bottom layer. Compared to traditional methods, this method ensures uniform element distribution, particularly for Se element, and enables a more desirable Cu-poor and Zn-rich composition with a Zn/Sn ratio closer to the standard stoichiometric ratio, resulting in a reduction in harmful internal defects. This strategy eliminates small grains at the bottom and decreases grain boundary formation, resulting in a dense double-layer structure. The high-quality CZTSSe absorber not only reduces carrier recombination during back transmission, further reducing reverse saturation current (J 0) and increasing optical current density (J L ), but also enhances shunt resistance (R sh) and decreases series resistance (R S). The estimated contribution percent for PCE improvement due to changes in J L, J 0, R sh, R S , and A are 17.20 %, 120.01 %, 1.15 %, 6.50 %, and -44.86 %, respectively. Ultimately, the highest photoelectric conversion efficiency (PCE) increased from 8.73 % to 10.49 %, and device uniformity improved considerably. This study highlights the significance of optimizing the microstructure of CZTSSe absorber layer in enhancing the performance of CZTSSe solar cells, and will provide guidance for producing high-quality CZTSSe absorber layers.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
2. Novel symmetrical bifacial flexible CZTSSe thin film solar cells for indoor photovoltaic applications10.1038/s41467-021-23343-1 ↗
3. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
4. Cu2ZnSnSe4 thin-film solar cells by thermal Co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
5. The role of hydrogen from ald‐Al2O3 in kesterite Cu2ZnSnS4 solar cells: grain surface passivation10.1002/aenm.201701940 ↗
6. Defect engineering in earth‐abundant Cu2ZnSn(S,Se)4 photovoltaic materials via Ga3+ ‐doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
7. Underlying mechanism of the efficiency loss in CZTSSe solar cells: disorder and deep defects10.1007/s40843-020-1385-0 ↗
8. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency10.1038/s41560-023-01251-6 ↗
9. Promoting carrier collection by DMF/DMSO binary solvent for efficient kesterite solar cells10.1016/j.cej.2022.140596 ↗
10. Identifying the origin of the Voc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution10.1039/D0EE03702H ↗
11. 10.24% efficiency of flexible Cu2ZnSn(S,Se)4 solar cells by pre-evaporation selenization technique10.1002/smll.202201347 ↗
12. Influence of the oxidation state of Sn in the precursor and selenization temperature on Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.mssp.2021.106251 ↗
13. Effect of metal-precursor stacking order on volume-defect formation in CZTSSe thin film: formation mechanism of blisters and nanopores10.1021/acsami.2c01892 ↗
14. DMF-based large-grain spanning Cu2ZnSn(sx,Se1-x))4 device with a PCE of 11.7610.1002/advs.202201241 ↗
15. Large-grain spanning monolayer Cu2ZnSnSe4 thin-film solar cells grown from metal precursor
16. Preparation of Cu2ZnSn(SxSe1−x)4 solar cells with two step sulfurization10.1016/j.solener.2019.12.048 ↗
17. Influencing mechanism of the selenization temperature and time on the power conversion efficiency of Cu2ZnSn(S,Se)4-Based solar cells10.1021/acsami.6b05201 ↗
18. A high-efficiency (12.5%) kesterite solar cell realized by crystallization growth kinetics control over aqueous solution based Cu2ZnSn(S,Se)410.1039/D1TA09024K ↗
19. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells
20. Small atom doping: a synergistic strategy to reduce SnZn recombination center concentration in Cu2ZnSnSe410.1002/solr.202270114 ↗
21. Engineering of interface and bulk properties in Cu2ZnSn(S,Se)4 thin-film solar cells with ultrathin CuAlO2 intermediate layer and Ge doping10.1021/acsaem.1c03569 ↗
22. Influence of Mo-pretreating on microstructure evolution of solution-processed absorbers for high efficient CZTSSe solar cells10.1016/j.matlet.2022.131992 ↗
23. Regulating crystal growth via organic lithium salt additive for efficient Kesterite solar cells10.1016/j.nanoen.2021.106405 ↗
24. Applications of graphene in five senses, nervous system, and artificial muscles10.1021/acssensors.2c02790 ↗
25. Applications of MXenes in human-like sensors and actuators10.1007/s12274-022-5272-8 ↗
26. Songang peng, hao jia, jinbo pang, bergoi ibarlucea, chongyang hou, yu cao, weijia zhou, hong liu, and gianaurelio cuniberti, toward smart sensing by MXene
27. Epitaxial growth of vertically aligned antimony selenide nanorod arrays for heterostructure based self-powered photodetector10.1002/adom.202200816 ↗
28. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗
29. Influencing mechanism of cationic ratios on efficiency of Cu2ZnSn(S,Se)4 solar cells fabricated with DMF-based solution approach10.1016/j.solmat.2019.02.029 ↗
30. Mechanism of enhanced power conversion efficiency of Cu2ZnSn(S, Se)4 solar cell by cadmium surface diffusion doping10.1016/j.jallcom.2021.160160 ↗
31. Effect of Mg doping on Cu2ZnSnS4 solar cells prepared by DMF-based solution method10.1016/j.optmat.2021.111211 ↗
32. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
33. Li+&Ag+ and Li+&Cd2+ double-ion-doping strategy to improve the efficiency of Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2021.03.035 ↗
34. Improvement of grain growth and composition distribution of Cu2ZnSn(S,Se)4 by using chloride-based precursor solution10.1016/j.solener.2020.12.067 ↗
35. Efficiency enhancement of Cu2ZnSnS4 monograin layer solar cells via absorber post-growth treatments
36. Effect of evaporated CdS layer on formation and performance enhancement of flexible Cu2ZnSn(S,Se)4 solar cells10.1016/j.vacuum.2021.110098 ↗
37. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
38. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
39. Simultaneously improving the morphology and defect properties of CZTSSe film via hybrid grain-growth mechanism
40. Interplay between Li and Na amid co-doped solution-processed Cu2ZnSn(S,Se)4 absorbers for solar cells
41. Solid-state NMR and Raman spectroscopy to address the local structure of defects and the tricky issue of the Cu/Zn disorder in Cu-poor, Zn-rich CZTS materials10.1021/ic5012346 ↗
42. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S,Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
43. Enhancement of power conversion efficiency of Ag-substituted Cu2ZnSn(S,Se)4 solar cells via tuning Cu2+/(Cu++Cu2+) percentage in precursor solution
44. Influence of WSe2 buffer layer at back electrode on performance of Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2020.02.033 ↗
45. Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation10.1016/j.jallcom.2022.168593 ↗
46. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% shockley–queisser limit10.1002/adfm.202101927 ↗
47. (Don't) look here!: the effect of different forms of label added to fashion advertisements on women's visual attention10.1016/j.bodyim.2019.08.011 ↗