Photothermal and photoelectric properties of Ag@Fe3O4 nanofluids
Source abstract
Abstract
To improve the utilization efficiency of solar energy, Ag@Fe 3O 4 core-shell nanoparticles with strong light absorption capacity were prepared, and showed good photothermal and photoelectric properties. Synergistic effects of nanoparticle concentration, light intensity and metal foam on photothermal and photoelectric properties were studied. The results showed that the SPR effect of nanoparticles improves the light absorption ability. Compared with deionized water, the addition of nanoparticles can increase the temperature by 6.10% and the power generation efficiency by 18.75%. When the concentration exceeds a certain range, the increase in concentration no longer plays a positive role. The increase of light intensity can increase the voltage and output power by up to 45.28% and 44.78%. However, it will increase the temperature gradient between the surface and the bottom of the nanofluids, increase the heat loss, and lead to a decrease in power generation efficiency. The synergistic effect of nanoparticles and metal foam can better improve the photothermal performance. The addition of metal foam can increase the power generation efficiency by 5.65%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Solar Radiation and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Energy, exergy, environmental and economic analyzes (4E) and multi-objective optimization of a PEM fuel cell equipped with coolant channels10.1016/j.rser.2021.112021 ↗
2. Natural-forced cooling and Monte-Carlo multi-objective optimization of mechanical and thermal characteristics of a bipolar plate for use in a proton exchange membrane fuel cell10.1016/j.egyr.2022.01.199 ↗
3. Conductive metal-organic frameworks for electrochemical energy conversion and storage10.1016/j.ccr.2021.214119 ↗
4. Magnesium-based thermochemical reactor with multiporous structures for medium-temperature solar applications: transient modelling of discharge capability10.1016/j.solmat.2022.111630 ↗
5. Super absorbent polymer as support for shape-stabilized composite phase change material containing Na2HPO4·12H2O–K2HPO4·3H2O eutectic hydrated salt10.1016/j.solmat.2021.111334 ↗
6. Study on the evaporation characteristics of Ag@Fe3O4 nanoparticle film interface10.1016/j.solener.2023.04.046 ↗
7. Three-dimensional simulation of wind tunnel diffuser to study the effects of different divergence angles on speed uniform distribution, pressure in outlet, and eddy flows formation in the corners
8. Generation expansion planning by considering wind resource in a competitive environment10.1007/s10973-019-09139-y ↗
9. Perforated fins effect on the heat transfer rate from a circular tube by using wind tunnel: an experimental view10.1007/s00231-018-2333-3 ↗
10. Improved energy conversion of a photovoltaic module‐thermoelectric generator hybrid system with different cooling techniques: indoor and outdoor performance comparison10.1002/er.7820 ↗
11. A critical analysis on the energy and exergy performance of photovoltaic/thermal (PV/T) system: the role of nanofluids stability and synthesizing method
12. A renewable energy-driven thermoelectric-utilized solar still with external condenser loaded by silver/nanofluid for simultaneously water disinfection and desalination10.1016/j.desal.2020.114354 ↗
13. Natural convection in an inclined cavity with time-periodic temperature boundary conditions using nanofluids: application in solar collectors10.1016/j.ijheatmasstransfer.2017.09.070 ↗
14. First approach on nanofluid-based solar still in high altitude for water desalination and solar water disinfection (SODIS)10.1016/j.desal.2020.114592 ↗
15. Water desalination using solar thermal collectors enhanced by nanofluids10.1002/ceat.202100339 ↗
16. An experimental investigation on the rheological behavior of nanofluids made by suspending multi-walled carbon nanotubes in liquid paraffin10.1016/j.molliq.2019.112269 ↗
17. MHD thermogravitational convection and thermal radiation of a micropolar nanoliquid in a porous chamber10.1016/j.icheatmasstransfer.2019.104409 ↗
18. Solar thermal power generation characteristics based on metal foam and phase change materials doped with nanoparticles10.1016/j.colsurfa.2022.130001 ↗
19. An experimental investigation of a hybrid photovoltaic/thermoelectric system with nanofluid application10.1016/j.solener.2017.06.069 ↗
20. Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins10.1016/j.ijheatmasstransfer.2018.11.020 ↗
21. Numerical investigation of natural convection behavior of molten PCM in an enclosure having rectangular and tree-like branching fins10.1016/j.energy.2020.118223 ↗
22. Investigating the thermal energy storage inside a double-wall tank utilizing phase-change materials (PCMs)10.1007/s10973-019-08573-2 ↗
23. Numerical study on natural convection of Ag–MgO hybrid/water nanofluid inside a porous enclosure: a local thermal non-equilibrium model10.1016/j.powtec.2020.04.005 ↗
24. The theoretical performance evaluation of hybrid PV-TEG system10.1016/j.enconman.2018.07.104 ↗
25. Heat transfer and turbulent simulation of nanomaterial due to compound turbulator including irreversibility analysis10.1016/j.ijheatmasstransfer.2019.04.030 ↗
26. Carbon nanomaterial-based nanofluids for direct thermal solar absorption10.3390/nano10061199 ↗
27. Photothermal and recycling properties of new composite magnetic nanofluids10.1016/j.powtec.2022.117691 ↗
28. Improving the thermal conductivity of ethylene glycol by addition of hybrid nano-materials containing multi-walled carbon nanotubes and titanium dioxide: applicable for cooling and heating10.1007/s10973-020-09921-3 ↗
29. Carbon nanocomposites with high photothermal conversion efficiency10.1007/s40843-018-9250-x ↗
30. Plasmonic multi-thorny Gold nanostructures for enhanced solar thermal conversion10.1016/j.solener.2018.06.071 ↗
31. Coupled plasmon resonances of Au thorn nanoparticles to enhance solar absorption performance10.1016/j.jqsrt.2020.107029 ↗
32. Solar photothermal conversion characteristics of hybrid nanofluids: an experimental and numerical study10.1016/j.renene.2019.04.016 ↗
33. Silver nanowires contained nanofluids with enhanced optical absorption and thermal transportation properties10.1002/eem2.12027 ↗
34. Facile synthesis of copper(I) oxide nanochains and the photo-thermal conversion performance of its nanofluids10.3390/coatings11070749 ↗
35. Two-level synergistic scatterings from porosity and particle aggregation in Cu nanofluids for the enhancement of solar thermal conversion10.1016/j.molliq.2021.116940 ↗
36. Preparation of Au–Ag bimetallic nanoparticles for enhanced solar photothermal conversion10.1016/j.ijheatmasstransfer.2017.07.005 ↗
37. Enhancement of photo-thermal conversion using gold nanofluids with different particle sizes10.1016/j.enconman.2016.01.009 ↗
38. Enhancement of photo-thermal conversion performance of the nanofluids through spectral complementarity between silver and cesium tungstate oxide nanoparticles10.1007/s11630-020-1306-2 ↗
39. Synthesis of porous Ag–Ag2S@Ag–Au hybrid nanostructures with broadband absorption properties and their photothermal conversion application, J. Alloy10.1016/j.jallcom.2021.163062 ↗
40. Strongly coupled Ag/TiO2 heterojunctions for effective and stable photothermal catalytic reduction of 4-nitrophenol10.1007/s12274-017-1612-5 ↗
41. Rapid synthesis of broadband Ag@TiO2 core–shell nanoparticles for solar energy conversion10.1016/j.solmat.2017.03.005 ↗
42. Synchronous steam generation and heat collection in a broadband Ag@TiO2 core–shell nanoparticle-based receiver10.1016/j.applthermaleng.2017.04.102 ↗
43. Ultrathin nanosheet-supported Ag@Ag2O core-shell nanoparticles with vastly enhanced photothermal conversion efficiency for NIR-II-triggered photothermal therapy10.1021/acsbiomaterials.1c01291 ↗
44. Optimizing Ag-Pt core-shell nanostructures for solar energy conversion, plasmonic photocatalysis, and photothermal catalysis10.1063/1.5095669 ↗
45. Facile one-step synthesis of plasmonic/magnetic core/shell nanostructures and their multifunctionality10.1039/c2jm16293h ↗
46. Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment10.1016/j.applthermaleng.2021.117893 ↗