journal article·2023-05

Influence of CuO doping on cobalt oxide for thermochemical energy storage

Rongjun Wu, Hongyu Huang, Lisheng Deng, Mitsuhiro Kubota, Noriyuki Kobayashi

Publisher page

Abstract

Thermochemical energy storage (TCS) was considered as a promising candidate for renewable energy utilization and energy efficient utilization. Particularly, metal oxide-based TCS has attracted increasing attention due to its operation possibility with air. In this work, CuO-doped cobalt oxide composite was prepared by a simple mechanical mixing process and explored for TCS application. The influences of CuO doping on the redox behavior, repeatability and the optical absorption property of cobalt oxide were investigated. Doping with CuO significantly decreased the onset temperature of reduction by 60 °C compared to pure cobalt oxide. Meanwhile, the result verifies that the onset temperature of re-oxidation could be tuned in the range from 825 to 890 °C by altering the doping amount of CuO. The reason for the tunable onset temperature was examined from the viewpoint of the structural transformation of the composite during the reduction/re-oxidation process. It was presumed that the doping amount of Cu species in CoO might relate to the onset temperature of re-oxidation. The repeatability of the composite was highly affected by the doping amount of CuO. Moreover, CuO with relatively small particle size exhibited a positive effect on improving the repeatability of CuO-doped cobalt oxide composite. Additionally, the absorption spectra demonstrate that CuO doping would affect the optical absorption property of the composite, enhancing the absorption of visible light. Hence, the results obtained in this work indicate that doping with CuO could be a promising method to extend the applicability of cobalt oxide-based system for TCS application.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and Cooling Systems · Phase Change Materials Research · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Solar energy for future world: - a review10.1016/j.rser.2016.05.022 ↗
2. Solar energy on demand: a review on high temperature thermochemical heat storage systems and materials10.1021/acs.chemrev.8b00315 ↗
3. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
4. Screening of thermochemical systems based on solid-gas reversible reactions for high temperature solar thermal energy storage10.1016/j.rser.2016.06.043 ↗
5. Hydrophilic substance assisted low temperature LiOH·H2O based composite thermochemical materials for thermal energy storage10.1016/j.applthermaleng.2017.09.050 ↗
6. Modification of magnesium and calcium hydroxides with salts: an efficient way to advanced materials for storage of middle-temperature heat10.1016/j.energy.2015.04.004 ↗
7. Investigation on the Ca(OH)2/CaO thermochemical energy storage system with potassium nitrate addition10.1016/j.solmat.2020.110646 ↗
8. The calcium-looping (CaCO3/CaO) process for thermochemical energy storage in concentrating solar power plants10.1016/j.rser.2019.109252 ↗
9. The SrCO3/SrO system for thermochemical energy storage at ultra-high temperature10.1016/j.solmat.2022.111632 ↗
10. Wong · 2011 · 10
11. Techno-economic assessment of solid-gas thermochemical energy storage systems for solar thermal power applications10.1016/j.energy.2017.11.084 ↗
12. Revisiting the BaO2/BaO redox cycle for solar thermochemical energy storage10.1039/C5CP07777J ↗
13. An in-depth investigation of BaO2/BaO redox oxides for reversible solar thermochemical energy storage10.1016/j.solmat.2021.110957 ↗
14. Thermochemical heat storage based on the Mn2O3/Mn3O4 redox couple: influence of the initial particle size on the morphological evolution and cyclability10.1039/C4TA03409K ↗
15. Exploitation of thermochemical cycles based on solid oxide redox systems for thermochemical storage of solar heat. Part 1: testing of cobalt oxide-based powders10.1016/j.solener.2013.12.032 ↗
16. First experimental studies of solar redox reactions of copper oxides for the thermochemical energy storage10.1016/j.solener.2015.03.005 ↗
17. Thermodynamically consistent modeling of redox-stable perovskite oxides for thermochemical energy conversion and storage10.1016/j.apenergy.2015.11.098 ↗
18. Experimental assessment of oxygen exchange capacity and thermochemical redox cycle behavior of Ba and Sr series perovskites for solar energy storage10.1016/j.solener.2016.05.031 ↗
19. Thermochemical behavior of perovskite oxides based on LaxSr1-x(Mn, Fe, Co)O3-δ and BaySr1-yCoO3-δ redox system for thermochemical energy storage at high temperature10.1016/j.energy.2019.01.081 ↗
20. Understanding redox kinetics of iron-doped manganese oxides for high temperature thermochemical energy storage
21. Lithium manganese oxides as high-temperature thermal energy storage system10.1016/j.tca.2016.07.018 ↗
22. Exploring the thermochemical heat storage capacity of AMn2O4 (A = Li or Cu) Spinels10.1016/j.ssi.2018.03.019 ↗
23. Solar-heated rotary kiln for thermochemical energy storage10.1016/j.solener.2012.07.012 ↗
24. Investigations on thermochemical energy storage based on technical grade manganese-iron oxide in a lab-scale packed bed reactor10.1016/j.solener.2017.05.034 ↗
25. Experimental evaluation of a pilot-scale thermochemical storage system for a concentrated solar power plant10.1016/j.apenergy.2016.12.032 ↗
26. 100-Wh multi-purpose particle reactor for thermochemical heat storage in concentrating solar power plants10.1016/j.egypro.2014.03.073 ↗
27. Kinetic and thermodynamic considerations for oxygen absorption/desorption using cobalt oxide10.1016/j.ssi.2005.10.005 ↗
28. Exploitation of thermochemical cycles based on solid oxide redox systems for thermochemical storage of solar heat. Part 2: redox oxide-coated porous ceramic structures as integrated thermochemical reactors/heat exchangers10.1016/j.solener.2014.12.036 ↗
29. Exploitation of thermochemical cycles based on solid oxide redox systems for thermochemical storage of solar heat. Part 3: cobalt oxide monolithic porous structures as integrated thermochemical reactors/heat exchangers10.1016/j.solener.2014.12.037 ↗
30. The cobalt-oxide/iron-oxide binary system for use as high temperature thermochemical energy storage materials10.1016/j.tca.2013.11.025 ↗
31. Thermochemical energy storage at high temperature via redox cycles of Mn and Co oxides: pure oxides versus mixed ones10.1016/j.solmat.2013.12.018 ↗
32. Metal oxides for thermochemical energy storage: a comparison of several metal oxide systems10.1016/j.solener.2015.12.032 ↗
33. High-temperature thermochemical energy storage based on redox reactions using Co-Fe and Mn-Fe mixed metal oxides10.1016/j.jssc.2017.05.015 ↗
34. Development of Co3-xNixO4 materials for thermochemical energy storage at lower red-ox temperature10.1016/j.solmat.2021.111194 ↗
35. Influence of crystallite size on the properties of zirconia10.1021/cm980705o ↗
36. Synthesis of CuO nanoparticles by precipitation method using different precursors10.1016/j.egypro.2013.06.808 ↗
37. Significance and importance of thermal expansion
38. Coarsening, densification, and grain growth during sintering of nano-sized powders – a perspective10.1016/j.ijrmhm.2016.09.004 ↗
39. Combining densification and coarsening in a Cellular Automata-Monte-Carlo simulation of sintering: Methodology and calibration10.1016/j.commatsci.2017.11.023 ↗
40. Coarsening in sintering: grain shape distribution, grain size distribution, and grain growth kinetics in solid-pore systems10.1080/10408436.2010.525197 ↗
41. Experimental aspects of CuO reduction in solar-driven reactors: comparative performance of a rotary kiln and a packed-bed10.1016/j.renene.2017.01.011 ↗