Effective thermal conductivity and thermal cycling stability of solid particles for sCO2 CSP applications
Source abstract
Abstract
A supercritical CO 2 (sCO 2 ) Brayton cycle solar power system based on solid particle thermal energy storage is proposed to enhance the efficiency of concentrated solar power (CSP). The effective thermal conductivity and thermal cycling stability of solid particles are crucial for sCO 2 CSP applications. Some natural and artificial solid particles, such as black silicon carbide, green silicon carbide, white corundum, brown corundum, brown ceramsite sand, garnet, river sand and desert sand are considered as potential thermal energy storage medium due to its low cost and easy availability in large quantities. However, there are few studies about the effective thermal conductivity and stability of these solid particles after thermal cycling tests. In this study, the effective thermal conductivity of these solid particles was measured by the hot wire method. Particularly, the effective thermal conductivity of black silicon carbide and green silicon carbide was measured by modified hot wire method. In addition, the changes of mass, real density, bulk density, void fraction and mean diameter of the above-mentioned solid particles after 100 times thermal cycling tests were also recorded to analyze thermal cycling stability. Based on the results of all the above tests, green silicon carbide exhibits high effective thermal conductivity and good thermal cycling stability, which presents a great potential as a thermal energy storage medium.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Adsorption and Cooling Systems · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Perspective of concentrating solar power10.1016/j.energy.2020.117373 ↗
2. Molten salts as engineering fluids – a review10.1016/j.apenergy.2016.09.003 ↗
3. Experimental investigation and thermodynamic modeling of an innovative molten salt for thermal energy storage (TES)10.1016/j.apenergy.2017.12.069 ↗
4. Dynamic corrosion behavior of 316L stainless steel in quaternary nitrate-nitrite salts under different flow rates10.1016/j.solmat.2020.110821 ↗
5. Dense suspension of solid particles as a new heat transfer fluid for concentrated solar thermal plants: on-sun proof of concept10.1016/j.ces.2013.08.051 ↗
6. Particles in a circulation loop for solar energy capture and storage10.1016/j.partic.2018.01.009 ↗
7. A comprehensive review on solid particle receivers of concentrated solar power10.1016/j.rser.2019.109463 ↗
8. Falcone · 1985
9. Properties of solid particles as heat transfer fluid in a gravity driven moving bed solar receiver10.1016/j.solmat.2019.110007 ↗
10. Characterization of desert sand to be used as a high-temperature thermal energy storage medium in particle solar receiver technology10.1016/j.apenergy.2018.02.106 ↗
11. Properties of granular materials as heat transfer and storage medium in CSP application10.1016/j.solmat.2015.06.037 ↗
12. Physical properties of solid particle thermal energy storage media for concentrating solar power applications10.1016/j.egypro.2014.03.109 ↗
13. Study on solar absorptance and thermal stability of solid particles materials used as TES at high temperature on different aging stages for CSP applications
14. Thermal cycling test of solid particles to be used in concentrating solar power plants10.1016/j.solmat.2020.110936 ↗
15. The development of direct absorption and storage media for falling particle solar central receivers10.1115/1.4030069 ↗
16. A review on packed bed solar energy storage systems10.1016/j.rser.2009.10.022 ↗
17. Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants
18. Effective thermal conductivity of granular porous materials10.1016/0735-1933(96)00003-6 ↗
19. Experimental measurements for the effective thermal conductivity of pebble beds with uncertainty analysis10.1016/j.fusengdes.2020.111707 ↗
20. Measurement of effective thermal conductivity of lithium metatitanate pebble bed by transient hot-wire technique10.1016/j.fusengdes.2020.111718 ↗
21. Thermal conductivity investigations of granular and powdered silica aerogels at different temperatures and pressures10.1016/j.enbuild.2016.03.008 ↗
22. Thermal conductivity measurement techniques for characterizing thermal energy storage materials – a review10.1016/j.rser.2019.03.020 ↗
23. Study on the thermal conductivity of materials measured by power off hot wire method
24. Historical evolution of the transient hot-wire technique10.1007/s10765-010-0814-9 ↗
25. Heat transfer characteristics of porous rocks10.1002/aic.690060115 ↗
26. Ma · 1986
27. High interfacial thermal resistance induced low thermal conductivity in porous SiC-SiO2 composites with hierarchical porosity10.1016/j.jeurceramsoc.2019.10.056 ↗
28. Interfacial differences between SiO2 grown on 6H-SiC and on Si(100)10.1063/1.123597 ↗
29. Zhang · 2004
30. Numerical and experimental study of stagnant effective thermal conductivity of a graphite pebble bed with high solid to fluid thermal conductivity ratios10.1016/j.applthermaleng.2019.114511 ↗