journal article·2017-06

Improved metal adhesion with galvanic nickel plating to silicon solar cells

John Rodriguez, Wei Zhang, Sean Lim, Alison Lennon

Publisher page

Abstract

Abstract Nickel galvanic displacement (NiGD) plating to silicon surfaces allows for the deposition of self-limiting sub-micron nickel layers. This paper reports the use of NiGD plating as an adhesion-promoting seed layer for light-induced plated nickel and copper (LIP-NiCu) contacts on chemically-etched silicon surfaces. The improved adhesion, which is attributed to surface roughening caused by the oxidation and subsequent etching of silicon in the fluoride-containing electrolyte, is quantified by stylus-based scratch measurements and shown to increase with the duration of sintering at 350 °C. The width-normalised cut-off force for NiGD layers, sintered for 10 min, was approximated by a normal distribution with a mean of 114±32 N/mm. Unsintered NiGD and sintered LIP-only control samples, plated onto similar chemically-etched silicon surfaces, were insufficiently adherent to be measured. The poor adhesion of the unsintered NiGD contacts was attributed to the formation of voids and an oxide-rich interface layer during the galvanic displacement process. Although sintering at 350 °C appeared to reduce the thickness of the interfacial oxide and eliminate the voids, the oxide was not totally removed and contributed to the measured contact resistance of sintered NiGD-treated contacts of ~ 15 mΩ cm 2 being more than an order of magnitude higher than laser-ablated LIP-NiCu contacts on a similar n -type emitter surface. Adhesion priming layers formed using NiGD were used to metallise selective-emitter cells patterned using aerosol jet etching and having planarised contact regions. Although the LIP-NiCu contact grid was strongly adherent, the average area-normalised series resistance ( R s ) was 0.96±0.18 Ω cm 2 , the majority of which is attributed to high contact resistance arising from a residual interfacial oxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. ITRPV, International Technology Roadmap for Photovoltaic - 2015 Results, in, 2016.
2. B.S.Tjahjono, J.H.Guo, Z.Hameiri, L.Mai, A.Sugianto, S.Wang, S.R.Wenham, High Efficiency solar cell structures through the use of laser doping, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, 2007.
3. Advanced PERC and PERL production cells with 20.3% record efficiency for standard commercial p-type silicon wafers10.1002/pip.2178 ↗
4. J.Horzel, N.Bay, M.Passig, M.Sieber, J.Burschik, H.Kühnlein, A.Brand, A.Letize, B.Lee, D.Weber, R.Böhme, Low cost metallisation based on ni/cu plating enabling high efficiency industrial solar cells, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, 2014.
5. N.Bay, J.Horzel, M.Passig, M.Sieber, J.Burschik, H.Kühnlein, J.Bartsch, A.Brand, A.Mondon, D.Eberlein, A.Völker, S.Gutscher, A.Letize, B.Lee, D.Weber, R.Böhme, Reliable contact formation for industrial solar cells by laser ablation and Ni/Cu plating, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference, Amsterdam, 2014, pp. 1272–1276.
6. Large area p-type PERL cells featuring local p+ BSF formed by laser processing of ALD Al2O3 layers10.1016/j.solmat.2015.02.034 ↗
7. Electrical and mechanical properties of plated Ni/Cu contacts for Si solar cells10.1016/j.egypro.2015.07.104 ↗
8. Evolution of metal plating for silicon solar cell metallisation10.1002/pip.2221 ↗
9. H.Hannebauer, T.Falcon, R.Hesse, T.Dullweber, R.Brendel, 18.9%-efficient screen-printed solar cells applying a print-on-print process, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, 2011, pp. 1607–1610.
10. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
11. Fine-line silver pastes for seed layer screen printing with varied glass content10.1016/j.egypro.2013.11.086 ↗
12. A.Schneider, L.Rubin, G.Rubin, Solar cell efficiency improvement by new metallization techniques - the day4 electrode concept, in: IEEE Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, HI, 2006, pp. 1095–1098.10.1109/WCPEC.2006.279333 ↗
13. The multi-busbar design: an overview10.1016/j.egypro.2013.11.092 ↗
14. T.Söderström, P.Papet, J.Ufheil, Smart wire connection technology, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 495–499.
15. Multi-wire iterconnection of busbar-free solar cells10.1016/j.egypro.2014.08.109 ↗
16. C.E.Dube, R.Gonsiorawski, Improved contact metallization for high efficiency EFG polycrystalline silicon solar cells, in: Proceedings of the 21st IEEE Photovoltaic Specialists Conference, Kissimmee, Florida, USA, 1990, pp. 624–628.10.1109/PVSC.1990.111695 ↗
17. Impact of surface topography and laser pulse duration for laser ablation of solar cell front side passivating SiNx layers10.1063/1.3493204 ↗
18. R.Russell, L.Tous, H.Philipsen, J.Horzel, E.Cornagliotti, M.Ngamo, P.Choulat, R.Labie, J.Beckers, J.Bertens, M.Fujii, J.John, J.Poortmans, R.Mertens, A simple copper metallisation process for high cell efficiencies and reliable modules, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012, pp. 538–543.
19. Large area copper plated silicon solar cell exceeding 19.5% efficiency10.1016/j.egypro.2012.05.008 ↗
20. Reduction of picosecond laser ablation threshold and damage via nanosecond pre-pulse for removal of dielectric layers on silicon solar cells10.1007/s00339-014-8444-x ↗
21. X.Wang, P.-H.Hsiao, W.Zhang, X.Wang, B.Johnston, A.Stokes, A.Fell, S.Surve, Y.Shengzhao, P.Verlinden, A.Lennon, Monitoring of adhesion for plated metallisation: Why busbar pull tests are not sufficient, in: Silicon PV 2016, Chambery, France, 2016.10.1016/j.egypro.2016.07.110 ↗
22. Laser Induced Periodic Surface Structures induced by surface plasmons coupled via roughness10.1016/j.apsusc.2013.10.141 ↗
23. G.O.Mallory, J.B.Hajdu, Electroless plating - fundamentals and applications, in, William Andrew Publishing/Noyes.
24. Electroless plating of nickel on silicon for fabrication of high-aspect-ratio microstructures10.1016/S0924-4247(96)01318-0 ↗
25. A.Karpour, S.R.Wenham, The importance of surface roughness in the adhesion of electroless-plated metal in inkjet printed grooves, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010, pp. 1410–1413.10.1109/PVSC.2010.5614406 ↗
26. Uniform plating of thin nickel layers for silicon solar cells10.1016/j.egypro.2013.07.350 ↗
27. Mechanism of the chemical deposition of nickel on silicon wafers in aqueous solution10.1149/1.1391778 ↗
28. Charge exchange processes during the open-circuit deposition of nickel on silicon from fluoride solutions10.1149/1.1393308 ↗
29. Etching mechanism and atomic structure of H-Si(111) surfaces prepared in NH4F10.1016/0013-4686(95)00071-L ↗
30. Uniform plating of thin nickel layers for silicon solar cells10.1016/j.egypro.2013.07.350 ↗
31. Y. Yao, Electrochemical metal deposition for silicon solar cells, in: School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, 2013.
32. Failure modes identified during adhesion testing of metal fingers on silicon solar cells10.1016/j.egypro.2015.02.087 ↗
33. Untangling the mysteries of plated metal finger adhesion: understanding the contributions from plating rate, chemistry, grid geometry and sintering10.1109/JPHOTOV.2016.2589364 ↗
34. A.Lennon, M.Renn, B.King, S.R.Wenham, Aerosol jet etching for silicon solar cells, in: Proceedings of the 24th European PV Solar Energy Conference and Exhibition, Hamburg, 2009.
35. Direct patterned etching of silicon dioxide and silicon nitride dielectric layers by inkjet printing10.1016/j.solmat.2009.06.028 ↗
36. Dielectric patterning using aerosol jet printing10.2352/J.ImagingSci.Technol.2012.56.4.040502 ↗
37. Use of inductively coupled plasma measurements to characterise light induced plating for silicon solar cells10.1016/j.solmat.2011.10.006 ↗
38. Etch rates for micromachining processing - Part II10.1109/JMEMS.2003.820936 ↗
39. N.Song, P.-C.Hsiao, W.Zhang, X.Wang, A.Lennon, Self-annealing behaviors of light induced plated copper fingers and rapid thermal processing effect in: Proceedings of the 6th Workshop on Metallization & Interconnection for Crystalline Silicon Solar Cells Kinstanz, Germany, 2016.
40. N.Song, W.Zhang, P.C.Hsiao, X.Wang, A.Lennon, Self-annealing behavior and rapid thermal processing of light induced plated copper fingers on silicon solar cells, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, Oregon, 2016.10.1109/PVSC.2016.7749974 ↗
41. Microstructure analysis of the interface situation and adhesion of thermally formed nickel silicide for plated nickel–copper contacts on silicon solar cells10.1016/j.solmat.2013.06.005 ↗
42. Chemical lithography and its applications for commercial high efficiency silicon solar cells
43. contact resistance and contact resistivity10.1149/1.2404240 ↗
44. Solar cell contact resistance - a review10.1109/T-ED.1984.21583 ↗
45. A.Esturo-Breton, F.Binaie, M.Breselge, T.Friess, M.Geiger, E.Holbig, J.Isenberg, S.Keller, T.Kühn, J.Maier, A.Münzer, R.Schlosser, A.Schmid, C.Voyer, P.Winter, K.Bayer, J.Krümberg, S.Henze, I.Melnyk, M.Schmidt, S.Klingbeil, F.Walter, R.Kopecek, K.Peter, Crystalline Si solar cells with selective emitter for industrial mass production, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, 2009, p. 1068.
46. Fabrication of single diffusion step selective-emitter solar cells
47. Investigation of selective emitter in single step diffusion process for plated Ni/Cu metallization crystalline silicon solar cells10.1016/j.cap.2013.01.041 ↗
48. Interfacial reactions of electroless nickel thin films on silicon10.1016/j.apsusc.2004.09.110 ↗
49. Electroless nickel deposition and silicide formation for advanced front side metallization of industrial silicon solar cells10.1016/j.egypro.2012.05.006 ↗
50. Characterization of electroless nickel as a seed layer for silicon solar cell metallization10.1007/s12034-014-0828-1 ↗
51. K.McIntosh, C.Honsberg, The influence of edge recombination on a solar cell’s IV curve, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, 2000, pp. 1651–1654.
52. Factor loss analysis method for silicon Wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗