journal article·2024-06

Al-induced variation to Ag crystal orientation of Ag–Al pastes during metallization

Guoguang Xing, Wei Chen, Yaoping Liu, Xiaolong Du

Publisher page

Abstract

It has been reported that adding Al to Ag metallization paste can reduce the contact resistivity on boron-doped emitters of n-type c-Si solar cells such as Tunnel Oxide Passivated Contact solar cell(TOPCon), because Al can assist forming Ag–Al spikes and dope into the p + emitter. However, Al addition also increases surface recombination and grid line resistivity. Therefore, a comprehensive understanding to the effect of Al on reducing contact resistivity is crucial for optimization of metallization process. In this paper, we investigated the contact characteristics between Ag–Al pastes with p-Si in comparison with those between Ag paste with p-Si. It was revealed that the driving forces for forming electrical contacts between Ag–Al pastes with p-Si is different from those between Ag pastes with p-Si. Moreover, we found that Al will induce the variation of Ag crystal orientation from (111) plane to (200) plane during firing. This induction process is firmly related to the melting amount of Ag during firing, accompanied by the disappearance of Ag 3Al. Finally, the effect of Al addition on the contact potential reduction of metal electrodes/p-Si was studied so as to figure out the solution to improving contact properties, which is of great significance for the development of advanced Ag–Al pastes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
2. Fundamentals, present status and future perspective of TOPCon solar cells: a comprehensive review
3. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
4. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
5. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
6. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
7. Review on screen printed metallization on p-type silicon10.1016/j.egypro.2012.05.003 ↗
8. Development of screenprintable contacts for p+ emitters in bifacial solar cells
9. Screen printable Ag-Al metal pastes for p+ silicon application in solar cells
10. Effects of aluminum in metallization paste on the electrical losses in bifacial N-type crystalline silicon solar cells10.1016/j.egypro.2016.10.086 ↗
11. Metallisation of boron-doped polysilicon layers by screen printed silver pastes10.1002/pssr.201700334 ↗
12. Aluminum-silicon ohmic contact on “shallow” n+p junctions10.1016/0038-1101(80)90011-8 ↗
13. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
14. Analysis of ohmic losses due to solder and pressure interconnection and related interface resistances for solar cells10.1016/j.egypro.2015.07.059 ↗
15. Contacting BBr3-based boron emitters with aluminium-free screen-printing paste10.1016/j.egypro.2016.07.103 ↗
16. Effect of Al content on the performance of Ag/Al screen printed N-type Si solar cells
17. Role of aluminum in silver paste contact to boron-doped silicon emitters
18. Microstructural characterization and current conduction mechanisms of front-side contact of n-type crystalline Si solar cells with Ag/Al pastes10.1063/1.4921544 ↗
19. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
20. Preservation of Si surface structure by Ag/Al contact spots : an explanatory model10.1016/j.egypro.2015.03.286 ↗
21. Emitter recombination current densities of boron emitters with silver/aluminum pastes
22. Contacting boron emitters on n‐type silicon solar cells with aluminium‐free silver screen‐printing pastes10.1002/pssr.201510443 ↗
23. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
24. Effect of glass phase and temperature on contact resistance between Ag and Al electrodes10.1088/2053-1591/aaf52b ↗
25. The electrical losses induced by silver paste in n-type silicon solar cells10.7567/JJAP.56.102302 ↗
26. Contact formation in the silver/aluminum thick film firing process - a phenomenological approach
27. Current conduction mechanism of front-side contact of N-type crystalline Si solar cells with Ag/Al pastes10.1109/JPHOTOV.2013.2292350 ↗
28. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
29. Modeling of contact resistivity of fire-through Ag-Al contacts to boron doped LPCVD polysilicon layers10.1063/5.0126042 ↗
30. Crystalline nature of metal spikes and silicon inclusions in Ag/Al screen-printing metallization10.1109/JPHOTOV.2015.2493363 ↗
31. Screen-Printable conductor metallizations for industrial n-TOPCon crystalline silicon solar cells
32. Dose-dependency of contact resistance and sheet resistance of B-implanted emitters for N-type crystalline Si solar cells fabricated using screen-printed fire-through Ag/Al paste metallization process10.1007/s40042-023-00752-7 ↗
33. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
34. Screen printing metallization of boron emitters10.1002/pip.933 ↗
35. Basic study on the influence of glass composition and aluminum content on the Ag/Al paste contact formation to boron emitters10.1016/j.egypro.2015.03.284 ↗
36. Low recombination firing-through Al paste for N-type solar cell with boron emitter
37. Effects of particle size of aluminum powder in silver/aluminum paste on n-type solar cells10.3934/matersci.2018.4.614 ↗
38. Influence of silver-aluminium alloy at solar cell rear side on series resistance and open circuit voltage10.1016/j.egypro.2016.07.065 ↗
39. Preferred growth direction of metals10.1007/BF03397928 ↗
40. Insight into interfaces and junction of polycrystalline silicon solar cells by kelvin probe force microscopy10.1016/j.nanoen.2017.04.045 ↗
41. Anomalous temperature dependence of series resistance in Ag and Al Schottky junctions10.1016/S0042-207X(98)00076-1 ↗