Theoretical insight into the solar thermal absorption property of ultra-high temperature ceramics TMB2 (TM = Ti, Zr, and Hf)
Source abstract
Abstract
TMB 2 ( TM = Ti, Zr, and Hf) ultra-high temperature ceramics have experimentally been proved as efficient sunlight absorbers operating at elevated temperatures. However, few have been known on the origination and factors that control the absorption performance. In this manuscript, the electronic structure and optical properties of TMB 2 ( TM = Ti, Zr, and Hf) were investigated by first principles calculations. Quasiparticle correction is introduced in the calculation of electronic structure. The theoretical dielectric function and optical constants are in good agreement with experiments. The reflectance spectra of TMB 2 demonstrate they are typical spectrally selective materials. The spectral selectivity of these borides at high temperature is weakened when effect of temperature is considered. The anisotropy in solar absorption of TMB 2 is rather weak. Discussion on the solar absorbance and thermal emittance reveals that plasma frequency acts on the solar absorbance and high temperature thermal emittance contradictorily. Our theoretical results demonstrate that it is feasible to tune the spectral selectivity of diborides by regulating the plasma frequency through cation doping.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Thermal properties of materials · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
2. Analysis of CSP plants for the definition of energy policies: the influence on electricity cost of solar multiples, capacity factors and energy storage10.1016/j.enpol.2010.06.009 ↗
3. Kennedy · 2002
4. The hypersonic environment: required operating conditions and design challenges10.1023/B:JMSC.0000041688.68135.8b ↗
5. Fahrenholtz · 2014
6. Solar selective properties and high temperature stability of CVD ZrB210.1016/0165-1633(81)90077-0 ↗
7. Ultra-High Temperature Ceramics for solar receivers: spectral and high-temperature emittance characterization10.2971/jeos.2012.12052 ↗
8. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
9. Optical properties of dense zirconium and tantalum diborides for solar thermal absorbers10.1016/j.renene.2016.01.068 ↗
10. Titanium diboride ceramics for solar thermal absorbers10.1016/j.solmat.2017.05.038 ↗
11. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
12. Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications10.1016/j.solmat.2014.09.037 ↗
13. Optical characterization of hafnium boride and hafnium carbide-based ceramics for solar energy receivers10.1016/j.solener.2018.04.036 ↗
14. Densification behavior and mechanical properties of the spark plasma sintered monolithic TiB2 ceramics10.1016/j.msea.2010.05.086 ↗
15. Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering10.1016/j.jeurceramsoc.2012.12.009 ↗
16. General trends in electronic structure, stability, chemical bonding and mechanical properties of ultrahigh temperature ceramics TMB2 (TM = transition metal)10.1016/j.jmst.2014.09.014 ↗
17. Comparative study of the electronic structure, phonon spectra, and electron-phonon interaction of ZrB2 and TiB210.1103/PhysRevB.87.064305 ↗
18. Advanced capabilities for materials modeling with Quantum ESPRESSO10.1088/1361-648X/aa8f79 ↗
19. a modular and open-source software project for quantum simulations of materials10.1088/0953-8984/21/39/395502 ↗
20. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
21. Norm-conserving pseudopotentials10.1103/PhysRevLett.43.1494 ↗
22. Many-body perturbation theory calculations using the yambo code10.1088/1361-648X/ab15d0 ↗
23. Razeghi · 2019
24. Ab initio reflectance difference spectra of the bare and adsorbate covered Cu(110) surfaces10.1103/PhysRevB.76.035436 ↗
25. SIMPLE code: optical properties with optimal basis functions10.1016/j.cpc.2019.02.016 ↗
26. Mahan · 2013
27. BoltzTraP. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
28. Band structure and x-ray photoelectron spectrum of ZrB210.1103/PhysRevB.16.726 ↗
29. X-ray absorption and resonant photoemission spectroscopy of ZrB210.1016/S0921-4534(03)00947-X ↗
30. Thermoelastic and optical properties of thick boride templates on silicon for nitride integration applications10.1021/cm702547p ↗
31. Electrical resistivities of monocrystalline and polycrystalline TiB210.1111/j.1151-2916.1984.tb19505.x ↗
32. Thermal and electrical transport properties of spark plasma-sintered HfB2 and ZrB2 ceramics10.1111/j.1551-2916.2011.04411.x ↗
33. 2012
34. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation10.1016/j.solmat.2006.10.021 ↗
35. Role of electron-phonon coupling in finite-temperature dielectric functions of Au, Ag, and Cu10.1103/PhysRevB.96.115154 ↗
36. New method for solving Boltzmann's equation for electrons in metals10.1103/PhysRevB.17.3725 ↗
37. An overview of ultra-refractory ceramics for thermodynamic solar energy generation at high temperature10.1016/j.renene.2018.08.036 ↗
38. Suitability of layered Ti3SiC2 and Zr3[Al(Si)]4C6 ceramics as high temperature solar absorbers for solar energy applications10.1016/j.solmat.2014.12.008 ↗