Viscosity and stability analysis of hitec salt-based alumina nanofluids
Source abstract
Abstract
Nanofluids based on molten salts have been recently studied thanks to the increase in some thermophysical properties compared to the base salt. Despite the interest shown in such material, information on its stability over time and viscosity is lacking, especially when Hitec is used as the base salt. This research evaluated for the first time at high temperature, the particle/agglomeration size, colloidal stability, as well as the rheological behavior of Hitec salt-based alumina nanofluids containing 0.5–1.5 wt% of alumina nanoparticles with a 13.6 nm nominal size. The results showed intermediate particle size and stability values, and that its nanofluid character (nanoparticles < 100 nm) remained after 1 h under static conditions and mechanical redispersion. The relation between the viscosity and temperature of pure Hitec followed the Guzmán-Andrade and Girifalco models and was compared to the correlations in the literature. Hitec and molten salt-based nanofluids (MSBNFs) with 0.5 wt% of Al 2O 3 displayed Newtonian behavior both with a rheological behavior index n = 1, while the other MSBNFs presented shear-thinning behavior with n = 0.827 and n = 0.743 for 1.0 and 1.5 wt% of Al 2O 3, respectively. This behavior is in accordance with the particle sizes analyzed using the Dynamic Light Scattering, the sample with the smallest initial size presented a Newtonian behavior compared to the other samples whose size was larger and therefore its behavior was shear-thinning. Finally, the experimental influence of the nanoparticle concentration on viscosity was compared to theoretical and empirical models. The Chandrasekar model was determined to provide the best experimental data fitting.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
2. Analysis and comparison between a concentrating solar and a photovoltaic power plant10.1016/j.apenergy.2013.07.046 ↗
3. 2050 LCOE improvement using new molten salts for thermal energy storage in CSP plants10.1016/j.rser.2015.12.148 ↗
4. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
5. Shape effect of Al2O3 nanoparticles on the thermophysical properties and viscosity of molten salt nanofluids for TES application at CSP plants10.1016/j.applthermaleng.2020.114942 ↗
6. Accurate viscosity measurement of nitrates/nitrites salts for concentrated solar power10.1016/j.solener.2016.08.037 ↗
7. Molten salts as engineering fluids – a review: Part I. Molten alkali nitrates10.1016/j.apenergy.2016.09.003 ↗
8. Enhanced specific heat capacity of molten salt-based nanomaterials: effects of nanoparticle dispersion and solvent material10.1016/j.actamat.2014.05.005 ↗
9. Specific heat of nanofluids synthesized by dispersing alumina nanoparticles in alkali salt eutectic10.1016/j.ijheatmasstransfer.2014.02.066 ↗
10. Viscosity measurements of multi-walled carbon nanotubes-based high temperature nanofluids10.1016/j.matlet.2014.02.032 ↗
11. Mechanical dispersion of nanoparticles and its effect on the specific heat capacity of impure binary nitrate salt mixtures10.3390/nano5031136 ↗
12. Experimental investigation of heat transfer performance of molten HITEC salt flow with alumina nanoparticles10.1016/j.ijheatmasstransfer.2016.11.015 ↗
13. Das · 2007
14. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
15. Specific heat capacity of molten salt-based alumina nanofluid10.1186/1556-276X-8-292 ↗
16. Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature10.1016/j.rser.2017.10.080 ↗
17. Thermal conductivity of molten salt-based nanofluid10.1063/1.4984770 ↗
18. Latent and sensible energy storage enhancement of nano-nitrate molten salt10.1016/j.solener.2018.04.012 ↗
19. Experimental measurements of thermal conductivity of alumina nanofluid synthesized in salt melt10.1063/1.5007885 ↗
20. Betts · 2011
21. Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles10.1016/j.ijheatmasstransfer.2016.09.004 ↗
22. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
23. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
24. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗
25. Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications10.1016/j.enconman.2017.03.062 ↗
26. Optimal concentration of alumina nanoparticles in molten hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
27. Experimental investigation of heat transfer performance of molten HITEC salt flow with alumina nanoparticles10.1016/j.ijheatmasstransfer.2016.11.015 ↗
28. Enhancing thermal conductivity of fluids with nanoparticles
29. Enhanced thermal properties of SiO2 nanocomposite for solar thermal energy storage applications10.1016/j.ijheatmasstransfer.2015.01.100 ↗
30. Experimental study on the effect of SiO2 nanoparticle dispersion on the thermophysical properties of binary nitrate molten salt10.1016/j.solener.2019.03.036 ↗
31. Size effect of nanoparticle on specific heat in a ternary nitrate (LiNO3–NaNO3–KNO3) salt eutectic for thermal energy storage10.1016/j.applthermaleng.2016.03.134 ↗
32. A new phase change material based on potassium nitrate with silica and alumina nanoparticles for thermal energy storage10.1186/s11671-015-0984-2 ↗
33. Influence of the production method on the thermophysical properties of high temperature molten salt-based nanofluids10.1016/j.molliq.2020.112570 ↗
34. Viscosity of nanofluids: a review of recent experimental studies10.1016/j.icheatmasstransfer.2016.02.005 ↗
35. Rheological analysis of binary eutectic mixture of sodium and potassium nitrate and the effect of low concentration CuO nanoparticle addition to its viscosity10.3390/ma8085194 ↗
36. Rheological analysis of nitrate molten salts with suspended particles for solar thermal plants10.1016/j.molliq.2020.112903 ↗
37. Rheology of Solar-Salt based nanofluids for concentrated solar power. Influence of the salt purity, nanoparticle concentration, temperature and rheometer geometry10.1016/j.solmat.2017.10.022 ↗
38. Eine neue bestimmung der Moleküldimensionen10.1002/andp.19063240204 ↗
39. A review of recent advances in thermophysical properties at the nanoscale: from solid state to colloids10.1016/j.physrep.2019.12.001 ↗
40. The viscosity of concentrated suspensions and solutions10.1063/1.1700493 ↗
41. A mechanism for non‐Newtonian flow in suspensions of rigid spheres10.1122/1.548848 ↗
42. The effect of Brownian motion on the bulk stress in a suspension of spherical particles10.1017/S0022112077001062 ↗
43. Rheology of concentrated disperse systems and minimum energy dissipation principle - I. Viscosity-concentration relationship10.1007/BF01516932 ↗
44. Structure and rheology of SiO2 nanoparticle suspensions under very high shear rates10.1103/PhysRevE.80.051403 ↗
45. Experimental investigations and theoretical determination of thermal conductivity and viscosity of Al2O3/water nanofluid10.1016/j.expthermflusci.2009.10.022 ↗
46. Study of viscosity and heat capacity characteristics of molten salt nanofluids for thermal energy storage10.1016/j.solmat.2020.110503 ↗
47. Rheological analysis of nitrate molten salts with suspended particles for solar thermal plants10.1016/j.molliq.2020.112903 ↗
48. Anomalous rheological behavior of complex fluids (nanofluids)
49. Rheological characteristics of molten salt seeded with Al2O3 nanopowder and graphene for concentrated solar power10.3390/en12030467 ↗
50. New high-temperature heat transfer and thermal storage molten salt–based nanofluids preparation, stabilization, and characterization
51. Colloidal stability of molten salt –based nanofluids: dynamic Light Scattering tests at high temperature conditions10.1016/j.powtec.2019.04.045 ↗
52. Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications10.1016/j.ijheatmasstransfer.2010.11.017 ↗
53. Investigation of heat capacity and viscosity enhancements of binary carbonate salt mixture with SiO2 nanoparticles
54. SiO2@Al2O3 core-shell nanoparticles based molten salts nanofluids for thermal energy storage applications10.1016/j.est.2019.101033 ↗
55. Effect of SiO2 nanoparticle addition on the wetting and rheological properties of solar salt10.1016/j.solmat.2020.110483 ↗
56. Coastal Chemical Co · 2009
57. A new heat transfer medium for high temperatures
58. Jung · 2012
59. Temperature dependence of viscosity and its relation to vapor pressure for associated liquids10.1063/1.1741907 ↗
60. LVIII. A theory of the viscosity of liquids.—Part II, the London, Edinburgh, and Dublin10.1080/14786443409462427 ↗
61. Review OF molten salt nanofluids
62. Viscosity of potassium nitrate–sodium nitrite–sodium nitrate mixtures10.1021/je00028a014 ↗
63. Experimental study of viscosity characteristics of high-temperature heat transfer molten salts10.1007/s11431-011-4530-x ↗
64. B.C. Costal Chemical Co., L.L.C., HITEC Heat Transfer Salt, (n.d.).http://www.coastalchem.com/.
65. Banerjee · 2017
66. Electrokinetic and rheological properties of highly concentrated kaolin dispersions: influence of particle volume fraction and dispersant concentration10.1016/j.clay.2010.03.020 ↗
67. Energy of interaction in colloids and its implications in rheological modeling10.1016/S0001-8686(01)00093-8 ↗
68. Rheological modelling of complex fluids. I. The concept of effective volume fraction revisited10.1051/epjap:1998125 ↗
69. A state of the art review on viscosity of nanofluids10.1016/j.rser.2017.03.113 ↗
70. Empirical and theoretical correlations on viscosity of nanofluids: a review10.1016/j.rser.2013.04.003 ↗