Performance enhancement of ZnSnP2 solar cells by a Cu3P back buffer layer
Source abstract
Abstract
Abstract In this study, we investigated reactive diffusion at the interface between a Cu back electrode and a ZnSnP2 absorber, at which ohmic behavior was previously confirmed by appropriate annealing. Cross-sectional observation of the Cu/ZnSnP2 interface revealed that Cu3P was formed along the ZnSnP2 surface after annealing. It was also found that Cu3P was epitaxially formed beside ZnSnP2 with a lattice-mismatch of less than 0.5% by electron diffraction around the Cu3P/ZnSnP2 interface and consideration of atomic arrangements, particularly the phosphorus sublattice, in both phosphides. In addition, photoelectron yield spectroscopy revealed that the work function of Cu3P and ionization potential of ZnSnP2 are both about 5.2 eV, suggesting that the potential barrier against hole transport is small at the Cu3P/ZnSnP2 interface. The formation of Cu3P at the interface leads to higher current density and no roll-over of J-V curves in ZnSnP2 solar cells. Consequently, the highest efficiency of ZnSnP2 solar cells of 3.87% was achieved by intentionally prepared Cu3P using sputtering. It is concluded that Cu3P is a promising back buffer material for ZnSnP2 solar cells due to the alignment with ZnSnP2 from the viewpoints of band and lattice structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Alta Devices
2. First Solar
3. Solar Frontier
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
5. Ultrathin high band gap solar cells with improved efficiencies from the world's oldest photovoltaic material10.1038/s41467-017-00582-9 ↗
6. Fabrication of Cu2SnS3 thin-film solar cells with power conversion efficiency of over 4%10.7567/JJAP.54.08KC06 ↗
7. Trade-offs in thin film solar cells with layered chalcostibite photovoltaic absorbers10.1002/aenm.201601935 ↗
8. Efficiency enhancement using a Zn1−xGex-O thin film as an n-type window layer in Cu2O-based heterojunction solar cells
9. Efficient nanostructured TiO2/SnS heterojunction solar cells10.1002/aenm.201901343 ↗
10. Iron disulfide for solar energy conversion10.1016/0927-0248(93)90095-K ↗
11. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
12. Mg doping and alloying in Zn3P2 heterojunction solar cells
13. Band offset engineering in ZnSnN2-based heterojunction for low-cost solar cells10.1021/acsphotonics.8b00427 ↗
14. Emerging inorganic solar cell efficiency tables (Version 1)
15. Theoretical photovoltaic conversion efficiencies of ZnSnP2, CdSnP2, and Zn1−xCdxSnP2 alloys
16. Bandgap engineering of ZnSnP2 for high-efficiency solar cells10.1063/1.4730375 ↗
17. Order–disorder phenomena and their effects on bandgap in ZnSnP210.1021/acs.jpcc.6b11215 ↗
18. Fabrication of ZnSnP2 thin films by phosphidation10.1016/j.tsf.2015.04.020 ↗
19. Bulk crystal growth and characterization of ZnSnP2 compound semiconductor by flux method10.1002/pssc.201400291 ↗
20. Solar cells using bulk crystals of rare metal-free compound semiconductor ZnSnP210.1002/pssa.201600650 ↗
21. ZnSnP2 solar cell with (Cd,Zn)S buffer layer: analysis of recombination rates10.1016/j.solmat.2017.09.035 ↗
22. Impact of heterointerfaces in solar cells using ZnSnP2 bulk crystals10.1021/acsami.7b08852 ↗
23. Impact of structure on carrier transport behavior at the interface between electrode and ZnSnP2 absorber
24. The crystal structure of Cu3P10.3891/acta.chem.scand.26-2777 ↗
25. Preparation and characteristics of ZnSnP210.1016/0022-3697(68)90132-7 ↗
26. The preparation and properties of single crystal copper phosphide10.1007/BF00552456 ↗
27. Low-temperature tailoring of copper-deficient Cu3−xP-electric properties, phase transitions, and performance in lithium-ion batteries10.1021/acs.chemmater.8b02950 ↗
28. The analysis of photoelectric sensitivity curves for clean metals at various temperatures10.1103/PhysRev.38.45 ↗
29. Semiconducting and plasmonic copper phosphide platelets10.1002/ange.201210277 ↗
30. Band offset at the heterojunction interfaces of CdS/ZnSnP2, ZnS/ZnSnP2, and In2S3/ZnSnP210.1063/1.4950882 ↗
31. Improvement of ohmic behavior of back contact in ZnSnP2 solar cells by inserting Cu3P
32. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗
33. Phase control of CuxTe film and its effects on CdS/CdTe solar cell10.1016/j.tsf.2006.12.151 ↗
34. MoSe2 layer formation at Cu(in,Ga)Se2/Mo interfaces in high efficiency Cu(In1−xGax)Se2 solar cells10.1143/JJAP.37.L71 ↗
35. Sze · 2006
36. Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors10.1016/j.solmat.2013.03.032 ↗
37. First-principles study of point defects in chalcopyrite ZnSnP210.1103/PhysRevB.90.125202 ↗