journal article·2018-03Open access

Determination of critical thermal loads in ceramic high concentration solar receivers

Olena Smirnova, Thomas Fend, Raffaele Capuano, Gereon Feckler, Peter Schwarzbözl, Florian Sutter

Abstract

Abstract Solar towers with volumetric air receiver technology are a promising technology for continuous or demand oriented electricity supply from a sustainable resource with competitive costs. The absorber elements used for this receiver technology are permeable ceramic honeycombs, which are heated up by concentrated solar radiation. Afterwards the heat is being transferred to air, which finally feeds the steam generator of a Rankine-Cycle. Resulting from the intensive solar flux of up to 800 kW/m2, the absorber modules are exposed to severe thermal loads. Maximum temperatures of more than 1000 °C are reached. Furthermore, during daily start-up and shut down procedures and additionally during cloud transitions the absorbers undergo transient heat loads, which might reduce their lifetime. The objective of the present study is to quantify the effect of typical thermal loads and to calculate the resulting mechanical stresses inside the absorber modules. Two types of absorbers have been compared, a conventional coarse honeycomb and an advanced one with a higher cellularity offering an improved efficiency potential. The mechanical strength of the cellular material is used to find out whether the computed thermomechanical stresses are critical or not. Finally, experimental thermo-shock tests have been carried out to validate the numerical models. It could be shown that under normal operation the thermomechanical stresses remain in a range markedly below the fracture stress in both absorber variants. As a consequence, limits are given to what extent the material should be thermally loaded during operation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Werkstoffe, die die Welt verändern
2. Studie über die Möglichkeiten eines Alpenkraftwerkes
3. An update on solar central receiver systems, projects, and technologies10.1115/1.1467921 ↗
4. A solar – driven combined cycle power plant10.1016/S0038-092X(97)00107-2 ↗
5. Cellular ceramics use in solar radiation conversion
6. Porous materials as open volumetric solar receivers experimental determination of thermophysical and heat transfer properties10.1016/S0360-5442(03)00188-9 ↗
7. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation10.1016/j.solmat.2006.10.021 ↗
8. Volumetric receivers in solar thermal power plants with central receiver system technology: a review10.1016/j.solener.2011.02.002 ↗
9. Performance evaluation of the 200-kWth HiTRec-II open volumetric air receiver
10. Numerical models of advanced ceramic absorbers for volumetric receivers10.1016/j.rser.2015.12.068 ↗
11. Inherent limitations of volumetric solar receivers10.1115/1.2870891 ↗
12. Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances10.1016/j.ijheatmasstransfer.2010.11.037 ↗
13. Fully coupled transient modeling of ceramic foam volumetric solar air receiver10.1016/j.solener.2012.12.016 ↗
14. R. Capuano, Th. Fend, B. Hoffschmidt, R. Pitz-Paal, Innovative VOLUMETRIC Solar Receiver Micro-design based on Numerical Predictions, in: Proceedings of the 15th International Mechanical Engineering Congress & Exposition, IMECE 15, Houston, TX, USA, 2015.10.1115/IMECE2015-50597 ↗
15. Theoretical and numerical investigation of flow stability in porous materials applied as volumetric solar receivers10.1016/j.solener.2005.11.006 ↗
16. Numerical investigation of flow and heat transfer in a volumetric solar receiver10.1016/j.renene.2013.06.001 ↗
17. High porosity materials as volumetric receivers for solar energetics
18. Material properties of a sintered α-SIC10.1063/1.556000 ↗
19. Metallic Materials - Bend Test (ISO 7438:2005), German version EN ISO 7438, 2005.
20. Th. Fend, P. Schwarzboezl, O. Smirnova, M. Schmücker, F. Flucht, S. Dathe, Thermo-mechanical Analysis of a Silicon Carbide Honeycomb Component applied as an absorber for concentrated solar radiation, in: 11th CMCME, Vancouver, June 14–19, 2015.10.1002/9781119234531.ch22 ↗